***** PLEASE DO NOT MODIFY THIS FILE *****
99
SC1MAP - GENERAL HELP
MOVING AND ZOOMING
[CURSOR]__MOVE NORTH/SOUTH/WEST/EAST [MOUSE]
[+]_______ZOOM IN  [MOUSE LEFT]
[-]_______ZOOM OUT [MOUSE RIGHT]
[TAB]_____TOGGLE POS/DIST/ZOOM/WIN [MOUSE CENTER]
[1..9]____FIXED ZOOM SETTINGS
[0]_______FULL VIEW
[X]_______RESET TO CENTER
[SPACE]___FULL VIEW WITH POSITION DISPLAY ... TOGGLE
[ESC]_____EXIT PROGRAM WITHOUT SAVING TO MOD FILE
[H]_______THIS HELP PAGE
[RETURN]__MEASURE DISTANCE - SET FIRST/SECOND POINT

NOTES:
- ALL DETAIL INFORMATION SUCH AS NDB RUNWAYS ETC. IS SHOWN WITH A ZOOM SMALLER THAN 10%
- PRESS HIGHLITED LETTER OR ALT-LETTER TO ACTIVATE MENUS (MOUSE CAN BE USED TOO)
1
SC1MAP - DISPLAY MENU
This menu is used for the selection of the objects that are to be shown on the map:
SCENERY  ______________  TOGGLE SCENERY RADIUS AND NAME
FILENAME ______________  TOGGLE SC1-FILENAME DISPLAY
MODE  _________________  TOGGLE MODE DISPLAY
LABEL  ________________  SHOWS CONTENTS OF PRE-DEFINED LABEL FILE (.LBL) (COMMENTS FOR THE SC1-FILE)
DETAIL  _______________  TOGGLE DETAIL LEVEL (SHOWS ALL OBJECTS ALL THE TIME)
NDB/VOR/ILS/COM  _____  TOGGLE NAV-AIDS
RUNWAY  _______________  TOGGLE RUNWAYS
+SCN-NAV ______________  TOGGLE DISPLAY OF VOR/NDB FREQUENCIES IN THE SCN-FILE
POLYGON  ______________  TOGGLE POLYGONS
RIVER  ________________  TOGGLE RIVERS
ROAD  _________________  TOGGLE ROADS
LINE  _________________  TOGGLE LINES
MOUNTAIN  _____________  TOGGLE MOUNTAINS
TWR  __________________  TOGGLE TOWER SYMBOLS
FUEL  _________________  TOGGLE FUEL SYMBOLS
KM_NM  ________________  TOGGLE DISPLAY KM/M OR NM/FT
CANT  _________________  TOGGLE N/E VARIATION DISPLAY
AIM  __________________  TOGGLE AIM ON/OFF
HEADER  _______________  TOGGLE HEADER ON/OFF (FOR HARDCOPY)
HELP  _________________  THIS HELP PAGE

Click on the text or press the highlighted letter for activation
2
SC1MAP - VIEW MENU
VIEW SETTINGS FOR THE MAP DISPLAY:
POSITION  _____________  SETS CENTER TO CURRENT MOUSE POSITION (LEFT MOUSE KEY) ... CURSOR KEYS ON KEYBOARD
ZOOM  _________________  ZOOM IN AND OUT (LEFT/RIGHT MOUSE KEY) ... [+] and [-] ON THE KEYBOARD
WINDOW  _______________  SELECT WINDOW TO ZOOM INTO (LEFT MOUSE KEY) ... NO SUPPORT ON KEYBOARD
DISTANCE  _____________  DISTANCE/HEADING FOR TWO SELECTED POINTS (LEFT MOUSE KEY) ... [ENTER] ON KEYBOARD
FULL  _________________  FULL VIEW OF THE MAP WITH POSITION DISPLAY
CENTER  _______________  CENTERS VIEW AND SETS ZOOM TO 100%
X_ZOOM  _______________  ASKS FOR NEW ZOOM FACTOR (0.1 to 200%)
REDRAW  _______________  REDRAWS SCREEN
HELP  _________________  THIS HELP PAGE
Click on the text or press the highlighted letter for activation
3
SC1MAP - SCENERY MENU HELP
SCENERY MANIUPULATION AND SETTINGS:
DELETE  _______________  DELETES ACTIVE SCENERY (DOUBLE CONFIRMATION)
CENTER  _______________  DEFINES A NEW CENTER FOR THE ACTIVE SCENERY (DOUBLE CONFIRMATION)
RADIUS  _______________  DEFINES A NEW SCENERY RADIUS (CONFIRMATION)
AREA  _________________  SELECTS/SHOWS ONLY SCENERIES INSIDE A GIVEN AREA
ALL  __________________  RE-LOADS ALL SCENERIES (CANCELS AREA OPTION)
SHOW_ALL  _____________  DISPLAYS CONTENTS OF ALL SC1-FILES IN VIEW
PUT_LABEL  ____________  CREATES A .LBL FILE ENTRY
USE_CANT  _____________  DISABLES/ENABLES CANT CORRECTION FROM .MAP FILE
HELP  _________________  THIS HELP PAGE

Click on the text or press the highlighted letter for activation
4
SC1MAP - MODE MENU
MODE MANIUPULATION AND SETTINGS:
ALTITUDE  _____________  MODIFIES ALTITUDE IN MODE FILE
HEADING  ______________  MODIFIES HEADING IN MODE FILE
PLANE  ________________  PLANE SELECTION FOR MODE FILE
THROTTLE  _____________  SETS THROTTLE IN % (0-100)
PAUSE  ________________  TOGGLES PAUSE
SLEW  _________________  TOGGLES SLEW
NAME  _________________  MODIFIES NAME OF ACTIVE MODE FILE
DATA  _________________  INFO ABOUT .MOD FILE (NAME/HEADING/ALT/HEADING/THROTTLE)
SAVE  _________________  SAVES MODE FILE TO DISK
HELP  _________________  THIS HELP PAGE

- THE DEFAULT MODE BEING SC1MAP.MOD YOU CAN LOAD/SAVE THE CURRENT POSITION TO ANY .MOD FILE YOU WANT.
- YOU CAN ALSO EXCHANGE SC1MAP.MOD WITH YOUR FAVOURITE MODE SETUP BY COPYING IT TO SC1MAP.MOD.
- THE SAVED .MOD FILE WILL THEN BE USED BY FS4 AS A STARTUP MODE.

Click on the text or press the highlighted letter for activation
5
SC1MAP - FIND MENU
FIND ITEMS OR GOTO SCENERIES:
LABEL  ________________  GOES TO A LABEL (NOT YET AVAILABLE)
GOTO  _________________  GOES TO A SCENERY
REPEAT  _______________  REPEATS LAST SEARCH (ALT-R)
MODE  _________________  GOES TO THE CURRENT MODE
SERIAL  _______________  GOES TO MULTIPLAY PLANE
HELP  _________________  THIS HELP PAGE

Click on the text or press the highlighted letter for activation
6
SC1MAP - INFO MENU HELP
INFORMATION DISPLAY :
GENERAL  ______________  GENERAL SC1MAP INFORMATION
SCENERY  ______________  SCENERY INFORMATION
NAV_AID  ______________  NAV-AID (NDB/VOR/ILS) INFORMATION
COM_ATIS  _____________  TEXT AND POSITION OF COM/ATIS FREQUENCIES
RUNWAY  _______________  RUNWAY INFORMATION
MODE  _________________  MODE INFORMATION
HELP  _________________  THIS HELP PAGE

- THESE OPTIONS ALLOW YOU TO OBTAIN ADDITIONAL INFORMATION ABOUT THE DISPLAYED OBJECTS.

Click on the text or press the highlighted letter for activation
7
SC1MAP - COMMUNICATIONS/MULTIPLAY MENU
COMMUNICATION BETWEEN SC1MAP AND FS4:
ONLINE  _______________  CONNECTS TO FS4
COM[1_2]  _____________  COM PORT SELECTION
_300_TO_9600  _________  BAUDRATE SETTING
SEND  _________________  SENDS MESSAGE TO REMOTE (FS4)
FOLLOW  _______________  REBUILDS SC1MAP DISPLAY ACCORDING TO PLANE POSITION
HELP  _________________  THIS HELP PAGE

- TO USE THIS OPTION YOU NEED A SECOND COMPUTER ON WHICH YOU RUN YOUR COPY OF FS4.
- YOU ARE THEN ABLE TO FOLLOW THE ACTIONS OF THE PLANE WITHIN FS4.
- NOTE THAT YOU NEED A NULL-MODEM CABLE FOR THE DATA EXCHANGE.
- PLEASE CHECK THE FS4 HANDBOOK FOR DETAILS.
- IF YOU HAVE PROBLEMS WITH THE CONNECTION ... DROP THE LINE BY PRESSING [ESC]

Click on the text or press the highlighted letter for activation
8
SC1MAP - OUTPUT MENU
PRINTS/WRITES INFORMATION TO PRINTER/FILE:
HARDCOPY  _____________  HARDCOPY TO IBM/EPSON OR HEWLETT PACKARD (USE +HP) GRAPHICS PRINTER
DXF  __________________  DXF FILE (CAD-PROGRAMS)
EPS  __________________  ENCAPSULATED POSTSCRIPT (PRINTER/FILE) USE +PS
HPGL  _________________  HP GRAPHICS LANGUAGE (PRINTER/FILE) USE +HPGL
ASCII  ________________  TRANSLATES OBJECTS TO ASCII FILE
REPORT  _______________  GENERATES A REPORT FOR THE SC1-FILE (PRINTER/FILE)
LIST  _________________  LISTS SCENERIES (PRINTER/FILE)
TO FILE  ______________  SENDS OUTPUT TO FILE
TO PRINTER  ___________  SENDS OUTPUT TO PRINTER (SET +PS/+HPGL/+HP IF NECESSARY)
FILENAME  _____________  SETS FILENAME FOR PRINTER OUTPUT TO FILE
HELP  _________________  THIS HELP PAGE

- NOTE THAT YOU NEED A POSTSCRIPT/HPGL PRINTER FOR THE OUTPUT WITH THESE FORMATS
- FOR HEWLETT PACKARD COMPATIBLE PRINTERS USE +HP FOR HARDCOPY AND +HPGL FOR HPGL-OUTPUT (PCL 5)

Click on the text or press the highlighted letter for activation
10
SC1MAP - EXIT MENU
EXITS OPTIONS FOR SC1MAP
EXIT  _________________  EXITS SC1MAP
SAVE  _________________  SAVES SETTINGS TO SC1MAP.INI
SHELL  ________________  DOS SHELL
HELP  _________________  THIS HELP PAGE

Click on the text or press the highlighted letter for activation
