TAPE SOFTWARE SETUP AUTO TAPE/DISK DATA COMPARISON AFTER BACKUP: N OVERWRITE EXISTING FILES DURING RESTORE: N READ ONLY MODE ON BACKUPS: N CONCURRENT DISK/TAPE OPERATION: Y SOFTWARE DATA COMPRESSION TYPE: NONE FILE SORT TYPE: NAME MULTI-VOLUME BACKUP: Y HARDWARE SETUP BOARD: 1Mb/s-500Kb/s JUMPERLESS TAPE CONTROLLER DMA CHANNEL: 3 INTERRUPT: 5 I/O BASE ADDRESS IN HEXADECIMAL: 370 Change a Program Program Name............: Big DOS Keys to Use on Open Menu: BD Memory Size (in K): 540 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 Program...: Parameters: C:\DV\DVANSI.COM Directory.: 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 Options: Writes text directly to screen.......: [Y] Displays graphics information........: [Y] Virtualize text/graphics (Y,N,T).....: [Y] Uses serial ports (Y,N,1,2)..........: [N] Requires floppy diskette.............: [N] Press F1 for advanced options Press � when you are DONE Change a Program Advanced Options System Memory (in K).......: 0 Maximum Program Memory Size (in K)..: Script Buffer Size.......: 1000 Maximum Expanded Memory Size (in K): 128 Text Pages: 2 Graphics Pages: 1 Initial Mode: Interrupts: 00 to FF 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 Window Position: Maximum Height: 25 Starting Height: 25 Starting Row...: 0 Maximum Width.: 80 Starting Width.: 80 Starting Column: 0 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 Shared Program Pathname..: Data......: 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 Close on exit (Y,N,blank)......: [ ] Uses its own colors..............: [Y] Allow Close Window command.....: [Y] Runs in background (Y,N,blank)...: [N] Uses math coprocessor..........: [Y] Keyboard conflict (0-F)..........: [0] Share CPU when foreground......: [Y] Share EGA when foreground/zoomed.: [Y] Can be swapped out (Y,N,blank).: [N] Protection level (0-3)...........: [0] I am running 386/25 with 4meg memory with the CT chipset with Jumbo250 tape software. Deasqiev 2.42 and Qemm 6.2. Advanced setup in DV Task Processing Time (in Clock Ticks) Foreground: 1 Background: 1 Memory Usage (in K) Common Memory: 17 DOS Buffer for EMS: 0 Optimize communications? (Y/N): N Allow swapping of programs? (Y/N): Y Manage printer contention? (Y/N): N Next field Tab Backup menu Esc DONE � AUTOEXEC.BAT ECHO Off PROMPT=$P$G PATH C:\;C:\QEMM;C:\DOS;C:\UTIL;C:\XTGOLD;C:\DOS\BATCH;C:\TAPE;D:\FD;D:\RA;D:\UTILBBS;C:\BEDIT SET NU=C:\NU SET RA=D:\RA SET COMSPEC=C:\COMMAND.COM SET DSZPORT=2 SET RAMAN=D:\RA\RAMAN VERIFY=OFF CLS CD\DV XDV CONFIG.SYS DEVICE=C:\DOS\SETVER.EXE DEVICE=C:\QEMM\QEMM386.SYS R:4 X=C800-CFFF DMA=64 I=0800-0FFF ST:M RAM FILES=50 BUFFERS=45 DOS=HIGH DEVICE=C:\QEMM\LOADHI.SYS /R:4 C:\ANSI.SYS SHELL=C:\COMMAND.COM /P /E:350 DEVICE=C:\X00.SYS DV E FIFO=15 B,1,19200 T=1024 R=2048 DEVICE=C:\QEMM\LOADHI.SYS /R:2 C:\HYPERDKX.EXE h s c:512 hs You can not use BNU fossel with the tape because it will allways reboot so use the X00 fossel and this is mandatory.. I am also using Tdoor 183 for file door and have it as a type 7. Here is the command line for the Tdoor type 7 drop and the command line in tdoor config. If you need Tdoor183 I do have it for freq as TDOOR183.ARJ and it has tdplus with it 414.917. This one seems to work better for me. The command line in the tdoor might work by its self not sure because I do liek the file door and beta test it as well. I was having problems with the 190 version so went back to the 183 version. type 7 == \RA\TDOOR.EXE TDOOR.CNF *M TAPE IN TDOOR Tape: E Tape Directory: D:\TAPE Cmd: C:\TAPE\TAPE.EXE RESTORE \TAPE\F$ Allong with all of this you must have the FC-10 card in your computer for the tape drive to work correctly. If you are using the floppy controller good luck because it won't work... In the dir you want to restore to just put a FILES.BBS of the files on the tape in there and your users should be able to get to them. I have the time out for the board set at 5 minutes and will work with less.. I believe all of this should work for you. I have got 88meg partitions and can backup a full partition while someone is online. You can not restore a full partition in a second window but you can restore one full directory at a time in the second window without any problem. If you have any further questions you can call Voice at 817-756-3330. I hope this works for you as it does for me...... Let me know if it works for you.. Bobby Posey This setup does work here and I can not promise that it will work on your system at all. You are welcome to try all of this and feel free to pass it along to anyone that might need the help untill CMS and DV get together and fix the programs to work together... ***************************************************************************** ADDENDUM: By Trent Shirley The above settings for the Colorado Software, and Desqview settings work with the Colorado Jumbo 120 and 250 tap backup systems, providing your processor is either slow, or you slow the processor down manually. I can turn the processor speed down by CTRL\ALT\SHIFT-MINUS (Grey minus key on keypad), or I can switch down by turbo button. Some systems to not have a functional turbo switch, so switching down from the keyboard may be neccessary. On some systems CTRL\ALT-MINUS will be sufficient, but you should check your manual to be certain what will work with your system. My system is a 386-40Mhz and will work with the tape software and Desqview ONLY if I switch the processor speed down to 20 Mhz or lower. The tape software works perfectly, at full speed, outside of DV. Alternatively, you may be able to change the bus speed of your motherboard, by either jumper or CMOS setup. This may slow the bus down enough to allow the card and software to communicate properly, but it has not been confirmed yet that the bus speed is indeed the problem. If you manage to get your system running by lowering bus speed, and not CPU speed, then please let me know. The settings listed above by Bob Posey, do work on my system. However, they are not the ONLY settings that will work. I have tried various settings for the FC-10 card that have worked fine. Dont be afraid to experiment to find settings that will suit your needs better than those listed above. If you run into problems, the settings in this file are a good base to start with. Let's thank Bob for his efforts to obtain this information, and for for taking the time to compile the information for our benefit. Trent Shirley Fido 1:321/118 Sysop: The Owl's Domain Northampton, MA. (413) 582-1844 14.4k V32bis