NAME: SCSI304.ZIP

DESCRIPTON:  DISK DEVICE DRIVER Problem on FAMILY 2 Machines with
some of the SCSI Drives.  (Family 2 with some SCSI drives ONLY)

Searching ZIP: SCSI304.ZIP

 Length  Method   Size  Ratio  Time   CRC-32  Attr  Name
 ------  ------   ----- -----  ----   ------  ----  ----
    XXX  Implode    XXX  33%   XXXXX  XXXXXXXX --w  SCSI304.TXT
  14904  Implode   8600  43%   13:20  4573555d --w  IBM2SCSI.ADD

WHO/WHY:  This fix will allow SCSI devices to access the last
Cylinder.  Needed if Boot Manager is installed at the end of a
drive.

INSTALL INSTRUCTIONS:
Before you start the install:
Copy the IBM2SCSI.ADD to Diskette 1 of the Install diskettes.

During install:
When install asks you to remove the diskette from drive A: and press Enter
(after installing Diskettes 1,2,3,4,& I), re-boot the system with a version
of DOS.  Copy IBM2SCSI.ADD (from Diskette 1) to the x:\OS2 sub-directory (x =
the drive you just installed to). Re-boot the system and complete the install.

Note: You may have to boot a version of OS/2 to do the copy if you installed
to a HPFS partition or if there are any HPFS partitions that come
before the install partition.   (USE THE INSTALL DISKETTE TO BOOT
FROM)