These are the working settings for the Hayes(R) SMARTMODEM OPTIMA 144
+ FAX144, used by the Authors' Area BBS, (513)848-4288, running
WILDCAT! v3.xx.

Profile 1:  (Is called by using ATZ1)

B16 B1 E0 L2 M0 N1 T Q0 V1 W2 X4 Y0 &A0 &C1 &D2 &G0 &J0 &K3 &L0 &Q5 
&R0 &S0 &T4 
S00:000 S02:043 S06:002 S07:050 S08:002 S09:006 S10:014 S11:095
S12:050 S18:000 S25:005 S26:001 S30:000 S36:007 S37:000 S38:020
S46:136 S48:007 S63:000 S82:128 S95:046 S97:030 S108:001 S109:062
S110:002

MDM (MAKEWILD)

You can install the modem definition file, .MDM, by choosing F3 in
Makewild's modem definition screen.

Modem Definition - Part 1             
1.  Port Number                             : 1
2.  Port IRQ                                : 04
3.  Port Base Address                       : 03F8
4.  Determine ringing using                 : Ring detect
5.  Determine baud rate using               : Result Code 2
6.  Init. port at what baud rate            : 57600
7.  Lock DTE at Init. baud rate             : Y
8.  Use CTS/RTS flow Control                : Y
9.  Number of seconds to wait for carrier   : 60
10. Millisec before answering               : 1000
11. Millisec to lower DTR for handup        : 2000
12. Millisec to wait before prelog          : 1500
13. Millisec to wait for result code        : 1500
14. Millisec between command strings        : 1500
15. Trigger level for FIFO                  : 8
 
Modem Definition - Part 2
1.  Verbal code for RING                    : RING
2.  Verbal code for   300 baud              : CONNECT
3.  Verbal code for  1200 baud              : 1200
4.  Verval code for  2400 baud              : 2400
5.  Verbal code for  4800 baud              : 4800
6.  Verbal code for  9600 baud              : 9600
7.  Verbal code for 14400 baud              : 14400
8.  Verbal code for 19200 baud              : 12000
9.  Verbal code for 38400 baud              : 38400
10. Verbal code for 57600 baud              : 57600
11. Modem error correction codes            : ARQ|MNP|REL|LAP-M|CLASS|
                                              ALT| V.32
12. Modem on-hook string                    : ATH0
13. Modem off-hook string                   : ATH1
14. Modem reset string                      : ATZ1
15. Modem initialization string             :
16. Modem answer string                     : ATA