Civil/Site Civil Engineering and Site Planning CogoWorks CogoWorks, the coordinate geometry module of AEC Group's integrated MasterWorks suite, provides tools to easily design streets and sub-divisions. CogoWorks' features include: * Input, output, and audit trail file processing. * Command syntax compatible with Intergraph's site and mapping software. * Tight integration with AEC Group's RoadWorks module. * Customized commands for lot, easement, right-of-way, and setback layouts. * Street, street-intersection, and cul-de-sac design capabilities. * Easy-to-use annotation and reporting capabilities. PC Unix SPARC AEC Group, Inc. 400 Meridian Street, #101 Huntsville, AL 35801 Contact: Geoff Lydon Phone: (205) 534-8141 Fax: (205) 534-8214 Price: $1,750.00 Demo available for $25.00. Requires: MicroStation 4.0 RoadWorks RoadWorks, the highway design module of AEC Group's integrated MasterWorks suite, has tools for all aspects of corridor related engineering. RoadWorks' highlights include: * All SiteWorks' functionality. * Complete horizontal and vertical alignment design, including spiral and compound curves, and symmetric and unsymmetric vertical curves. * Alignment station equations and alignment annotation, including stationing. * Roadway modeling using sophisticated typical sections or templates. * Template functionality includes superelevation modeling, multiple material layers, and independent ditches. * Fully compatible with SiteWorks and CogoWorks. PC Unix SPARC SiteWorks SiteWorks is the site design module of AEC Group's integrated MasterWorks suite. The basis for all functionality in SiteWorks is a digital terrain model that can be used to easily model both existing and proposed surfaces. Key features include: * Flexible ASCII and graphical DTM data input. * Unlimited terrain model size using random and breakline points. * Multiple surfaces. * Tools to easily manipulate existing surfaces into proposed surfaces such as building pads or parking lots. * Profile and cross-section generation with all extraction and display parameters user-definable. * Computation of volumes using traditional end-area algorithm, or directly from triangles. PC Unix SPARC AEC Group, Inc. 400 Meridian Street, #101 Huntsville, AL 35801 Contact: Geoff Lydon Phone: (205) 534-8141 Fax: (205) 534-8214 Prices: RoadWorks-$4,000.00 SiteWorks-$2,500.00 Demo available for $25.00. Requires: MicroStation 4.0 CogoWorks provides sophisticated annotation and table generation tools. RoadWorks' templating tools allow modeling of multiple material layers automatically. SiteWorks easily models existing and proposed surface features such as brow ditches, drainage ditches, parking lots, and driveways. CAiCE:Survey System CAiCE:Survey System has the following modules that are used to work interactively with data and information in a graphical setting: * The CAiCE:Project/Segment Management System manages survey data across all CAiCE modules. Data can come from various sources including manuscript field books, electronic data collectors, or files from other applications. Complete analysis and editing of raw survey data can be done easily along with "true" least squares adjustment. The CAiCE:Project/Segment Management System provides a smooth, simple, and powerful bridge between external field survey data and the other CAiCE modules. * The CAiCE:Survey Data Processing/Geometry System combines survey data processing and geometry. Survey data is graphically displayed. Calculated (coordinate) survey data can be interactively edited. Full featured 3D coordinate geometry includes interactive geometry commands as well as macro and object generation capabilities. Data from the CAiCE:Project/Segment Management System (or other COGO packages) are used. * The CAiCE:Digital Terrain Modeling System is a general purpose modeling and contouring system designed to accept various types of data points - including XYZ, cross sections, or surface profiles (feature or break lines). Surface triangular models are generated using industry standard triangular irregular network (TIN) methodology. This TIN model is used to compute contours, cross sections, or profiles for surfaces and subsurfaces. Integrated into AASHTO's IGrds Roadway Design System, CAiCE:Digital Terrain Modeling System provides roadway designers with interactive access to DTM data. Due to its flexibility and compatibility, the CAiCE:Survey System will complement and enhance systems you already use. PC Unix AGA Computer Services Inc. 410 Ware Boulevard, #618 Tampa, FL 33619 Contact: Alan Akman Phone: (813) 620-1444 Fax: (813) 620-9019 Price: $3,200.00 (Includes all CAiCE modules) The main dialog box for the project/segment management system. Graphical display of collected survey data (courtesy of Florida Department of Transportation). Dialog box for Line-Line intersection command. Surface model of collected survey data . GEOPAK GEOPAK is a comprehensive roadway design package featuring true interactive design and plans production capabilities. GEOPAK includes: * Interface to electronic field books. * Interactive horizontal and vertical alignment generation. * Full functioned coordinate geometry. * Numerous interactive plans production tools. * Existing ground cross-sections and profiles from digital terrain modeling (DTM), topographic mapping, and cross-section surveys. * Comprehensive and powerful techniques to generate proposed cross-sections without templating. * Cross-section sheet layout. * Earthwork calculations from intelligent cross-sections. * Automated intersections, pavement marking tools, and generation of quantities. * Ability to work in 2D but generate detailed 3D wireframe models. Available for IGDS on the VAX. PC Unix SPARC Beiswenger, Hoch & Associates, Inc. 1190 NE 163rd Street, #203 North Miami Beach, FL 33160 Contact: Gabrial Norona Phone: (305) 944-5151 Fax: (305) 948-6290 Prices: $9,500.00 (PC); $11,000.00 (UNIX, Sparc) Demo available. J-BAR J-BAR is a reinforced concrete detailing package for production of drawings and schedules complying with BS4466. Very flexible methods for creating bars and their associated call-up labels, user- defined special shapes, and several facilities for adding graphic elements provide detailers with a powerful tool. Checks are made for bending limits and maximum bar lengths; tolerances are automatically allowed where bars are fitted to an outline. Associative bar definition further controls quality and allows re-definition of bars to be automatically reflected in bars and labels throughout the drawing. Coupled bars and ACI standard bends are available. PC CADAC Limited 14 Saxon Business Centre Windsor Avenue London SW19 2RR ENGLAND Contact: Edward Hillier Phone: (081) 543-3411 (From the U.S. 011-44-81-543-3411) Fax: (081) 543-6844 (From the U.S. 011-44-81-543-6844) Price: $2,800.00 Use J-BAR for high quality production of reinforcement drawings for all types of structures. CEAL CEAL (Civil Engineering Automation Library) is an integrated system of applications software for surveying, mapping, GIS, design, construction, and management of infrastructure. Parametric modeling systems based on coordinate geometry (COGO), digital terrain modeling (DTM), 3D alignment design, and automatic plotting of plan/profile/section construction documents. Interactive graphics. Also available for IGDS on the VAX PC Unix SPARC COGO COGO is a complete set of coordinate geometry routines for civil engineering and surveying applications. It complies with the nomenclature, conventions, and standards of The COGO Book. COGO is a subset of and fully compatible with CEAL (Civil Engineering Automation Library). It supports 3D curvilinear spatial objects; and it provides database management, graphics, plotting, and CAD/GIS interfaces. PC Field CEAL Field CEAL is a subset of CEAL (Civil Engineering Automation Library) for surveying, mapping, and GIS data acquisition. Features include: * Field processing of survey and photogrammetric data. * Interactive graphics editing of Digital Map Models for digital mapping and terrain models. * Surveyor's subset of COGO and TOPO. * Survey data and map plotting in the field. PC CLM/Systems, Inc. 5601 Mariner Drive, #400 Tampa, FL 33609 Contact: Don Clark Phone: (813) 286-8755 Fax: (813) 286-8993 Prices: CEAL-Call for quote COGO-Call for quote Field CEAL-Call for quote CEAL COGO Field CEAL MicroCOGO MicroCOGO is a full featured coordinate geometry system that operates within MicroStation, allowing simultaneous design and drafting in a 2D or 3D design file. MicroCOGO maintains an external database of geometric information with 15 digit precision. Additionally, CTCOGO can manipulate this same coordinate geometry database outside of MicroStation. Over 170 commands are available to solve problems involving tangents, circular curves, spirals, traverses, areas, and alignments. MicroCOGO's graphic output of points, lines, arcs, spirals, and annotations are automatically added to the design file and immediately displayed (no DXF transfers). PC SPARC MicroIGRDS MicroIGRDS is a roadway design system that handles all aspects of the design process. Fully menu-driven within MicroStation, it supports many design criteria previously found only in mainframe software. Complex horizontal and vertical alignments are easily defined, displayed, and annotated. Both 2D and 3D design files can be used to automatically calculate cross sections for horizontal alignment. Earthwork quantities are calculated with the application of flexible roadway templates and side slopes complete with template widening, superelevation, benching, special ditch profiles, and right-of-way limiting. MicroCOGO is included with MicroIGRDS; the applications share each other's data. PC SPARC CTDTM/CUTXSC CTDTM/CUTXSC enables cross sections for any alignment to be extracted from a 2D or 3D MicroStation design file. The horizontal alignment may be defined as a "figure" in Comp-Tron's MicroCOGO, MicroIGRDS, or CTCOGO programs, or as ASCII input. Cross- sectional information can be output into a variety of formats including AASHTO's RDS SRIF format, Comp-Tron's MicroIGRDS, and HEC2. PC SPARC Comp-Tron Inc. 89 Mosher Street Baltimore, MD 21217 Contact: Software Sales Department Phone: (410) 523-7330 or (800) 552-5667 Fax: (410) 523-7333 Prices: MicroCOGO-$1,100.00 MicroIGRDS-$4,500.00 CTDTM/CUTXSC-$500.00 (Quantity discounts available) Cloverleaf interchange designed using MicroCOGO (courtesy of Rummel, Klepper & Kahl Engineers). Horizontal and vertical displays for MicroIGRDS DELA-ANALYST DELA-ANALYST Surface Analysis Module allows Dela-DTM digital elevation models to be analyzed interactively within MicroStation. This software is being used by engineers, GIS mapping specialists, surveyors, and architects. Use DELA-ANALYST for: * Surface spot heights. * Cross-sections and profiles. * Differential movement or thickness contours. * Plotting areas/volumes above and below a design grade. * Calculating cut and fill volumes for side sloped areas. * Themes mapping for height, slope, aspect, and shading. Profiles, surfaces, contours, and lattices are written to separate design file levels. PC Unix Delamac Propriety Ltd. P.O. Box 17704 Fort Worth, TX 76102-0704 Contact: Weldon Scrivner Phone: (800) 299-3352 Fax: (817)-877-0706 In Australia: Phone: (07) 832-1432 Fax: (07) 832-6623 Toll Free U.K. to Australia: Phone: 0-800-892-066 Elsewhere in Europe: Phone: +31 2290-18283 Price: DELA-DTM-$1,200.00 Free demo available. DELA-ANALYST EDS RoadCalc RoadCalc's easy to use graphical interface (all in MDL) brings you a very advanced roadway design system. RoadCalc's features include controlled R.O.W.'s, multiple original, design and as-built material layers, AASHTO design speed tables, multiple profiles, stations equations, and unequal length spirals. ROADCALC is integrated with our other modules through "Intelligent Indexing." Earthwork volume reports, along with cross section and plan and profile plots, automatically produce your final design and construction documents. PC EDS Coordinate Geometry Implementing industry standard COGO routines, our Coordinate Geometry module allows you to input data, create, and query nodes, lines, curves, spirals, and alignments using standard surveying terminology. Our advanced graphical user interface provides productivity gains in performing surveying computations while developing design drawings. Through our patented "Intelligent Indexing," surveying data is automatically shared with ROADCALC, Surface Modeling, Site Design, and our hydrology modules. PC EDS Data Collection Supporting most popular data collectors, our Data Collection system automatically downloads, reduces, and incorporates the collected data into your drawing. Point ID's, descriptions, symbols, and line work appear automatically through the power of "Intelligent Indexing." Design data (from ROADCALC Surface Modeling, Site Design, and our hydrology modules) can then be automatically uploaded to your collector to make your construction staking crew the most efficient in the business. PC EDS Data Transfer Our Data Transfer module automatically transfers node information between your MicroStation design file and a wide variety of ASCII file formats. You can develop legal descriptions, sorted node lists, and station/offset and radial stake out reports. Reports are displayed onscreen, written to ASCII files, or printed. Audit trail reports are also generated to give you a printed history of your work in COGO and Survey Adjustment. PC EDS Drafting Using our Drafting module, you fully annotate and add finishing touches to project drawings. Lines, curves, lot numbers, areas, stations, offsets, and coordinates are quickly and cleanly labeled. With over 40 automatic functions, Drafting greatly speeds up final plan preparation. PC EDS Profiles Our Profiles module allows you to define design profiles with MicroStation's graphical user interface. Design profiles are easily generated for roadway centerlines, gutters, curbs, ditches, shoulders, pavement edges, berms, and levees. Parameters such as curve length, K-factors, and site distances make the definition of vertical curves a simple task. Additionally, placement of manholes, inlets, sewers, and all profile annotation is automatic. Through "Intelligent Indexing" the profile drawing is automatically merged with your plan drawing when ROADCALC develops plan and profile sheets. PC EDS Site Design Site Design offers advanced features that use TINs developed in our Surface Modeling module to create final site plans. Defining flow arrows, depth contours, construction nodes, merged TINs, slope projections, and feature projections is automatic. Shading for slope analysis and cut/fill areas help you analyze your design. Integrated with our other modules through "Intelligent Indexing," Site Design helps you complete your projects in a fraction of the time required with other systems. PC EDS Surface Modeling Surface Modeling combines MicroStation 4.0 with advanced digital terrain modeling techniques to create the next generation of contouring software. "Intelligent Indexing" seamlessly integrates this module is into our civil engineering and surveying series. Using an unlimited number of nodes, you can develop fully annotated contour maps, triangulated irregular networks, and rectangular grids. These surface models are then automatically shared with our ROADCALC, Site Design, Profiles, and Hydrology modules. PC EDS Survey Adjustment Using nodes entered with our COGO module or translated through data transfer, this powerful tool provides routines to automatically balance and adjust the most complex traverses and networks. Adjustments are performed graphically in MicroStation using the compass, Crandall, or transit methods. You can also perform angle and elevation adjustments. Nodes to be adjusted are selected graphically or by node ID. Since the design file is the only database for our surveying system, you'll never worry about graphic data getting out of sync with numeric coordinate data. PC Engineering Data Systems Corporation Clock Tower West, Suite G Dubuque, IA 52003 Contact: Applications Sales Phone: (800) 369-6344 Fax: (319) 556-5321 Prices: RoadCalc-$2,495.00 Coordinate Geometry-$495.00 Data Collection-$495.00 Data Transfer-$495.00 Drafting-$495.00 Profiles-$495.00 Site Design-$1,495.00 Surface Modeling-$1,095.00 Survey Adjustment-$495.00 Free demo available Requires: MicroStation 4.0 M-COGO M-COGO is the base module of the multi-user M-Series family of surveying and mapping software solutions that run inside MicroStation 4.0. Features include: * Multi-user on networks. * All standard COGO functions included. * Automatic annotation of points, lines, curves, sets. * Mapcheck (plancheck) routine for plotting legal descriptions. * Automatic curve tables, coordinate edit dialog, intersection routines. * Digitize existing contour maps. * Boundaries defined and manipulated as "sets" of points; area calculations by points or "sets". * Data file export to Intergraph's InRoads. * Import/export data in many formats-including data collectors. * Excellent documentation and much more. Demo available for $10.00. PC Unix SPARC M-CONTOUR M-CONTOUR is completely integrated into M-COGO and adds the automatic generation, smoothing, and annotation of major and minor contour lines. A 3D digital terrain model can also be automatically generated. Features include: * Automatic or manual boundaries for area to be contoured. * "Excluded areas" such as the footprint of an existing structure. * "Break line" to designate abrupt changes in relief, such as a ditch bank. * 3D topographic viewing (Digital Terrain Modeling) * Automatic smoothing; manual or automatic contour line annotation. * Import/export data to popular roadwork/sitework software packages. * Excellent documentation and much more. PC Unix SPARC M-DESIGN M-DESIGN is completely integrated into M-COGO and adds advanced coordinate geometry site design and layout functionality. Features include: * Spiral curve entry and annotation. * Street intersections-straight-straight, curve-straight, and T- intersection with automatic returns. * Semicircular arc. * Compound and reverse curves. * Automatic cul-de-sacs-bulb and offset. * Automatic centerline and offset layout and stationing annotation. M-DESIGN is especially suited for companies involved in the design of right-of-ways (both highway and railroad) and subdivisions. PC Unix SPARC M-FIELD M-FIELD is completely integrated into M-COGO and adds the ability to reduce and adjust field survey data. It operates on the same job data files as M-COGO and is multi-user on networks just as M- COGO. Features include: * Named traverse/sideshot data sets entered as horizontal distance/vertical distance or slope distance/zenith angle. * Field traverse automatically drawn. * Raw field data always preserved. * Least Squares adjustments; Transit Rule adjustments; Compass Rule adjustments. * Radial stakeout,curve centerline, and offset stakeout reports. * Resection. * Base line station/offset calculations. * Well-written documentation and much more. PC Unix SPARC Engineering Desktop 3325 North University Avenue, #300 Provo, UT 84604 Contact: Mark Williams Phone: (801) 373-6110 Fax: (801) 373-1039 Prices: M-COGO-$995.00 M-CONTOUR-$1,495.00 M-DESIGN-$995.00 M-FIELD-$995.00 Requires: MicroStation 4.0 EDIBUILDING EDIBUILDING is a MicroStation application for civil and industrial technical drawing. The main features include: * Beginning of drawing: inserting work format, stating unit of measure and desired scale. * Produces automatic walls with any inclination and thickness. * Produces window and door embrasures on above-mentioned walls stating indications about dimension and construction attributes. * Realizes niches and parastas. * Realizes building planimetry semi-automatically: room creation, working surface, perimeter and automatic volume calculation- rooms, windows, doors (metric data displays and prints). Some building libraries complete EDI BUILDING. Available for IGDS on the VAX. PC SPARC THERMOBUILDING THERMOBUILDING is an easy-to-use program that is used to automatically draw heating systems (modul and 2 iron pipe systems) with material lists. THERMOBUILDING is for both draftsmen and planners. The supplied cell library contains the main appliances used in heating systems including boilers, radiators, fan-coils, and thermostats. These symbols can be associated (in the PLUS version) to external software for drafting and managing quantity take out and specification documents. PC Evolvente S.R.L. Via Reverberi, 2 42019 Scandiano (RE) ITALY Contact: Mr. Salimbeni Roberto Phone: (0522) 984030 (From the U.S. 011-39-522-984030) Fax: (0522) 984030 (From the U.S. 011-39-522-984030) Prices: EDIBUILDING-$2,000.00 THERMOBUILDING-$3,500.00 VISIONPLUS VISIONPLUS 2.00 provides all the tools required by land surveyors to accomplish subdivisions, streets, and parcels design, as well as COGO calculations and adjustments. VISIONPLUS automates parcels, buildings, texts and lines drafting, scale change, and a lot more. VISIONPLUS uses configuration files to determine levels, symbologies, cells' names, texts' sizes, and fonts used for each element created. You can create new configuration files suiting specific standards and attach it to your design file. VISIONPLUS creates an accurate coordinate file (17-digit precision) for each design file. Nearly every electronic field book (data collector) can be directly read/written by VISIONPLUS. French version is now available. English version is planned for mid 1992. PC Geoplus Inc. 2906 Labelle Boulevard Prevost, C.P. 357 PQ J0R 1T0 CANADA Contact: Sales Department Phone: (514) 224-2991 Fax: (514) 224-5603 Price: $3,995.00 GWN-COGO GWN-COGO is a series of integrated software modules designed to work as an interactive graphics COGO package in conjunction with MicroStation. GWN-COGO allows the surveyor to enter, edit, and adjust survey data according to standard geometric routines. Supported functions include automatic plotting with annotation, curve and spiral design, area calculations, alignments, audit trail generation, reporting, transformations, and batch processing. Design commands are supplied for cul-de-sacs, street intersections, and right of ways. PC Unix GWN-COGO-dB GWN-COGO-dB allows the user to enter, edit, and adjust survey data according to standard geometric routines. Supported functions include automatic plotting with annotation, curve and spiral design, area calculation, alignment, audit trail generation, reporting, and batch processing. In addition, GWN-COGO-dB has the capability to attach attribute information to the coordinate geometry data. The user can select by spatial and attribute criteria and report, change color, weight, symbology, or style of selected elements. Demo available for $100.00. PC Unix GWN Systems Inc. 11133 - 124 Street Edmonton, AB T5M 0J2 CANADA Contact: Ray Fowler Phone: (403) 452-0090 Fax: (403) 453-5207 Prices: GWN-COGO-$1,650.00 GWN-COGO-dB-$3,000.00 (PC only) GWN-DTM GWN-DTM is a series of integrated software modules that provide powerful interactive mapping and design capabilities in many engineering, survey, and mapping disciplines. It works inside MicroStation, but modules can also be executed in batch mode. The base module provides the facilities to manipulate a theoretically unlimited number of spatial data points and generate complex Triangulated Terrain Models (TTMs) for contour generation, profile, and cross-sectioning. Additional modules provide more automated design features such as template and surface-to-surface volume calculation and generation of isopach. The software is designed with open architecture allowing users to manipulate input and output data in ASCII. PC Mac Unix GWN-STORM GWN-STORM is an interactive storm sewer design system. It is a standalone package which also works with GWN-DTM. Manhole, pipe, and drainage area data is stored in dBASE III files and linked to graphic elements. Elements can be placed in plan view in 2D or 3D. The system will automatically size and place pipes in a network system. It supports rational design flows, baseflow, and manual input of flows. Automatic design values can be manually overridden. Profile plots are automatically generated for selected linked pipes (figures). Future support of simulation models, open channel flow, and pond routing will be provided. PC Unix GWN Systems Inc. 11133 - 124 Street. Edmonton, AB T5M 0J2 CANADA Contact: Henry Skrundz Phone: (403) 452-0090 Fax: (403) 453-5207 Price: GWN-DTM-$3,500.00 GWN-STORM-$2,000.00 Demo available for $100.00. GWN-ROAD GWN-ROAD is an interactive roadway design package based on the ASSHTO standards. GWN-ROAD allows an engineer to easily design roadway systems based on the design criteria recommended by ASSHTO, with the capability to override any of the recommended design values. The engineer may interactively customize and create tables to meet specialized design specifications for horizontal and vertical control including superelevation. GWN-ROAD has MicroStation 4.0 dialog boxes for ease of use. Design features include: * Multiple design profiles and surface support. * Interactive traverse layout, design profile, and template design. * Fully compatible with GWN-DTM and GWN-COGO. PC Unix GWN Systems Inc. #200, 11133 - 124th Street. Edmonton, AB T5M 0J2 CANADA Contact: A.R.V. Ribeiro Phone: (403) 452-0090 Fax: (403) 453-5207 Prices: $2,000.00 Demo available for $100.00. Requires: MicroStation 4.0 InFlow Part number SE**13400. InFlow designs and analyzes open channels, ponds, and drainage networks. Relational database technology integrates with 3D modeling to assist engineers in developing solutions for surface water collection, transport, and disposal. Because InFlow is integrated with Intergraph's water resources and civil engineering applications, it provides a complete solution for hydraulics, hydrology, and site development projects. Sophisticated modeling, engineering, and interactive graphics based on MicroStation 32 provide visual confirmation of designs. With InFlow's user-friendly interface, design criteria and tables can be customized to meet specific requirements. Design tables contain such information as on-grade inlet capacities, pipe sizes, runoff coefficients, and rainfall intensities. Unix InRoads Part number SE**13300. InRoads provides a comprehensive solution-from data collection to final design to construction documentation-for highway, railway, airport, and other transportation and land development projects. InRoads includes the functionality of InSurv, InSite, and Inflow. In addition, InRoads has many sophisticated features to streamline transportation projects. For example, parameters and design criteria, such as superelevation rates, vertical sight distance, design speed, and friction factors, can be customized and saved as standards. The size and number of terrain models that InRoads computes and manages are practically limitless. Firms can use their own templates and typical cross sections to develop final models. Unix Intergraph Corporation Huntsville, AL 35894-0001 Contact: Intergraph Sales See the list of Intergraph offices in the front of this catalog. InSewer Part number SE**18100. InSewer creates a 3D model to assist engineers in design and analysis of wastewater collection systems. Working with MicroStation 32 interactive graphics, InSewer provides visual confirmation of analyses, allowing engineers to quickly make adjustments to develop the optimum design solution. Engineers can query the relational database and sort information to systematically produce reports which can be placed in drawings. When designing a wastewater collection system, engineers can use existing digital terrain models and site designs created with InRoads, InSite, InSurv, or InFlow. Integration with Inflow allows engineers to design and document a combination stormwater drainage/wastewater collection system. Unix InSite Part number SE**13200. InSite provides civil engineers with advanced tools for data capture, geometric design, surface design and modeling, earthworks computations, and overhead line design. These tools make InSite a valuable tool for increasing productivity in projects such as subdivision, landfill, and small roadway design; and commercial site development. InSite accepts data collected with electronic theodolites through Intergraph's MGE-ETI interface. InSite's rich set of COGO capabilities enables engineers to rapidly compute points and lines and lay out traverses, alignments, and developments. Throughout the design process, engineers can create reports which can be placed directly on engineering drawings. Unix Intergraph Corporation Huntsville, AL 35894-0001 Contact: Intergraph Sales See the list of Intergraph offices in the front of this catalog. InSewer assists engineers in designing and modeling wastewater collection systems. InSite provides pole spotting and clearance detection for overhead line design. InSitu Part number SE**18900. InSitu streamlines the geotechnical workflow by managing and interpreting large quantities of field and laboratory data and automating production of contract documents. A flexible database manages all types of field description and test data. Logs containing information such as project, site, and borehole data can be saved and used repeatedly. On site plans, boreholes can be annotated with coordinates, boring number, and more. Borings can be projected to cross sections generated from alignments created with InRoads. From cross sections, engineers can interpret subsurface strata and develop 3D models. InSitu generates drawings including boring logs, site plans, fence diagrams, and contour maps. Unix InSpan Part number SE**21200. InSpan automates bridge layout and its accompanying requirements: data collection, geometry calculation, structural modeling, and document and report generation. InSpan automates collection of topography, roadway and railway surveys and designs, inspection data, and more. InSpan uses existing and proposed surfaces-including those generated with InRoads-to calculate bridge geometry for tangent and curved superstructures. Reference chords allow short- or long-chord framing of curved superstructures. Control checks optimize layout of beams and girders. Standard AISC and AASHTO sections can be placed. Reports on alignments, span data, geometry, overhang dimensions, and more can be created in addition to drawings and presentation-quality 3D models. Unix Intergraph Corporation Huntsville, AL 35894-0001 Contact: Intergraph Sales See the list of Intergraph offices in the front of this catalog. InSitu helps geotechnical engineers manage and interpret large quantities of field and laboratory data. InSpan automates bridge layout and its accompanying engineering tasks. InSurv Part number SE**16700. InSurv provides data collection, surveying analysis, civil engineering, and drawing production tools for land development, transportation, and public works projects. Interactive graphics-based COGO provides visual confirmation of surveyed data. Analysis tools provide fast and accurate data review, enabling engineers to make adjustments quickly to develop the best design. InSurv accepts data from a variety of sources: scanned hardcopy, stereoplotters, ASCII files, total station data collectors, and more. InSurv performs error adjustments using compass rule, transit rule, Crandall method, or least squares method. Horizontal and vertical alignments are easily generated, and cul-de-sacs and street intersections can be quickly designed. Unix InSurv Computer-Based Training Part number STAM00900. InSurv Computer-Based Training is a personal COGO classroom-on a compact disk. Featuring vivid instructional graphics and friendly audio training, InSurv Computer- Based Training is an effective medium for learning graphics-based COGO and reducing training costs. Topics include: field data input and adjustment, finished boundary generation, right-of-way alignment, lot and easement creation, lot and right-of-way annotation, and stakeout report production. The package includes question-and-answer sessions and workflow simulations and can be used repeatedly. Lessons can be started, paused, and completed at each individual's pace. At the completion of training, the individual will also know the basic COGO capabilities of InSite and InRoads. Unix Intergraph Corporation Huntsville, AL 35894-0001 Contact: Intergraph Sales See the list of Intergraph offices in the front of this catalog. Interactive graphics-based COGO tools in InSurv help firms excel in land development, transportation, and public works projects. InSurv Computer-Based Training's interactive audio/visual lessons let engineers learn graphics-based COGO at their own pace. SurveyWorx SurveyWorx allows the surveyor or civil engineer to automatically convert surveying information from a data collector or COGO program to MicroStation design file elements. A set of standard survey data descriptions is provided and can be output to the MicroStation design file. A set of default element codes such as level and color are provided for the data symbols but can be customized using the provided editor. PC Mac James + Reynolds Engineering Group 475 Metroplex Drive, #505 Nashville, TN 37211 Contact: Darrell James Phone: (615) 331-6801 Fax: (615) 331-1616 Price: $795.00 GEOCADplus GEOCADplus is an application which links the GEOSECMA system to MicroStation. GEOSECMA is an independent comprehensive software package for land surveying, road design, terrain models, and earthworks. GEOCADplus establishes a direct link between the GEOSECMA database and the active design file in MicroStation. From GEOSECMA you can import: surveyed points and lines, terrain models (3D) and contours, roadlines, and draft maps. As an extra feature you can perform GEOSECMA applications directly from MicroStation. GEOCADplus runs inside the CAD environment without leaving MicroStation. MDL has been used for developing GEOCADplus, so it has the same functionality as MicroStation. PC KORDAB AB Hultv„gen S-371 54 Karlskrona SWEDEN Contact: Karl Sjolin Phone: (455) 84455 (From the U.S. 011-46-455-84455) Fax: (455) 25375 (From the U.S. 011-46-455-25375) Price: Call for quote Requires: GEOSECMA CELAT CELAT is a set of civil engineering laboratory test programs. Each program uses pull down menus for data input, test runs, graphic display of curve fitting, and output. Extensive data validation is performed at data entry stage. Results of different tests can be incorporated into a common output. Using these programs, users can incorporate laboratory test results in a tabular and/or graphic format with their drawings. Facilities are provided to include graphic images (company logos) in the output format. PC NOVAData 1516 Duncan Road Oakville, ON L6J 2R3 CANADA Contact: Rui Mendes Phone: (416) 842-5989 Fax: (416) 842-2246 Price: $10,215.00 (Includes all 10 modules; modules can be purchased separately.) Free demo available. PNET: Part 1-PIPEDATA and PIPEFLOW PIPEDATA and PIPEFLOW provide the complete solution for water supply pipe networks, from a detailed database to sophisticated engineering analysis and design programs. Full graphical and database integration make this package an invaluable tool for water engineers. PIPEDATA is based on a complete water supply network database providing for a full water supply management system with menu driven queries and report generation. PIPEFLOW is the basic engineering module performing pipe flow analysis for networks of any complexity. PC PNET: Part 2-PIPESIM PIPESIM performs continuous simulation of complex networks, allowing for variable drawoffs, changing reservoir levels, and different working conditions of pumps and valves. The model can be used for minimizing reservoir operating storage and setting up reservoir operating rules; for establishing minimum and maximum values of flow parameters; for optimizing network system operation, such as pumps and valves; for optimal sizing of delivery lines to reservoirs; for optimizing network layout and reservoir siting; for network element evaluation purposes; for determining areas of high water losses; and for optimizing system water supplies. PC PNET: Part 3-NETCOST NETCOST performs cost optimization for complex networks. It establishes the most economical pipe types, pipe classes, and pipe diameters satisfying user specified imposed criteria with regard to pipe velocities, pipe diameters, internal pressures, and supply pressures. Three types of pipes are allowed: steel, asbestos-cement, and PVC. Pipe data is stored in separate look up tables. Such tables can be set up for other pipe types. Extensions to existing networks as well as proposed networks are handled. The use of NETCOST has been found to save on average 30% of pipe costs for networks designed using PIPEFLOW. PC NOVAData 1516 Duncan Road Oakville, ON L6J 2R3 CANADA Contact: Rui Mendes Phone: (416) 842-5989 Fax: (416) 842-2246 Price: $1,750.00 Price: Part 1-PIPEDATA/PIPEFLOW-$3,500.00 Part 2-PIPESIM-$3,100.00 Part 3-NETCOST-$2,600.00 Free demo available. FLIC FLIC provides the complete solution for flood line computations. Full graphical and database integration provides major cost savings in data input, data manipulation, and drawing production. The engineering package computes subcritical and supercritical profiles, identifies the control points, and computes the energy losses associated with hydraulic jumps. Allowance is made for any type of special structures such as bridges, culverts, weirs, flumes, and spillways. Multi-profile runs can be performed for any part of the water-course, and envelopes of maximum water levels and envelopes of flood lines can be plotted. PC WATHAM WATHAM analyzes unsteady flow caused by sudden decelerations and/or accelerations in flow in pressure pipe systems. Such sudden changes of flow rate cause transient pressures transmitted within the network, referred to as water hammer. WATHAM makes use of PIPEDATA, a complete network database, and PIPEFLOW for calculating initial network conditions. The model is suitable for any network complexity allowing for any number of pumps, valves, reservoirs, supply points, and relief devices of any known type and complexity. Disturbances of various types are allowed, with any number of them occurring during the simulation. PC Unix NOVAData 1516 Duncan Road Oakville, ON L6J 2R3 CANADA Contact: Rui Mendes Phone: (416) 842-5989 Fax: (416) 842-2246 Prices: FLIC-$1,750.00 WATHAM-$7,500.00 DesignMaster The DesignMaster series provides software for surveying; civil engineering, with concept-to-completion site planning; and roadway design. Base systems include cogo and t-net mapping. Options include surveying capabilities, section modeling, road design, and site design. An interface to the MicroStation design file format is provided. PC MapMaster Topographic, planimetric, and general purpose drafting utilities are included in the MapMaster series. Options are available for cross- section and profile plotting routines, 3D perspective views, and surface projections. An interface to the MicroStation design file format is provided PC PacSoft Inc. 825 5th Avenue, #100 P.O. Box 3419 Kirkland, WA 98083-3419 Contact: Sales Department Phone: (206) 827-0551 Fax: (206) 827-7722 Price: Call for quote Requires: 4mb RAM minimum, mouse Coordinate Management System - CoordMan CoordMan is a system for entering and managing coordinate data in the MicroStation environment. User-defined graphics and text can be placed in a design file interactively or in batch mode from an ASCII file. Coordinate data can also be selectively extracted from a design file into an ASCII file. CoordMan may be useful as an interface to existing COGO packages. PC Performance Software, Inc. 975A Progress Center Boulevard Lawrenceville, GA 30243 Contact: Craig King Phone: (404) 962-0925 Fax: (404) 339-1742 Price: $750.00 TERRAMODEL TERRAMODEL is a high-performance land modeling environment for the land design engineer, land surveyor, and photogrammetrist, offering an intelligent data management system which allows unique seamless integration of program routines, providing a broad range of solutions utilizing a host of multifaceted application modules. The TERRAMODEL environment supplies the engineer with a binary compatible solution in both DOS and Unix operating systems. The application modules include: Contour, Coordinate Geometry, Drafting, DTM Cross Sections, Mapping, Site Design, Roadway Design, LEGAL Writer, 3D View, MicroStation Transfer, and Kork Transfer. PC Unix SPARC Plus III Software, Inc. One Dunwoody Park, #250 Atlanta, GA 30338 Contact: Alex Zeiger or Kris Panks Phone: (404) 396-0700 or (800) 235-4972 Fax: (404) 396-4290 Price: $7,990.00 Module prices: $995.00 - $1,995.00 Demo available for $125.00. Requires: PC-6mb RAM UNIX or Sparc-16mb RAM, 330mb hard drive min. MICROTOP MICROTOP is a mapping and surveying package. Some of its functions include: * Registration of field observation/angles, distances, etc. * Transformation of traverse and tachometer raw data into rectangular coordinates. * Transfer from MICROTOP files to ASCII files. * Mapping according to the surveyor's standards (drawing setup, grid, rounded up coordinates and plotting). PC The Surveyor's Tool Box Some of the features of this software package include: * Automatic bank generation based on line string. * Vector eraser with adaptable shape. * Automatic dropping of line strings and cells. * Correction of almost straight or almost flat on a shape or closed line string. * Elements accounting in a level or in all levels. Level mode of elements meeting predefined symbolgy (color, line, type, and weight). * Automatic modification in all files or in a fence of text elements or cells. PC SiGEF 4 et 6, Rue Barromee 75015 Paris FRANCE Contact: Richard Carnohan Phone: (01) 45678866 (From the U.S. 011-33-1-45678866) Fax: (01) 42733662 (From the U.S. 011-33-1-42733662) Price: MICROTOP-$2,500.00 The Surveyor's Tool Box-$950.00 Geocomp Geocomp has applications in road design, subdivision design, detail surveys, stockpike volumes, mining, dam design, irrigation design, and drainage design. PC Unix Survey Computing Consultants 260 Auburn Road Hawthorn, Victoria 3122 AUSTRALIA Contact: Ken Toleman Phone: (03) 8196951 (From the U.S. 011-61-3-8196951) Fax: (03) 8196959 (From the U.S. 011-61-3-8196959) Price: $8,000.00 AGEO.EXPERT AGEO.EXPERT is designed for data collector processing using different collectors and several crews on the same job. Field work can be done in any order. AGEO will solve and display the network(s) of measurements graphically on the screen and adjust by least squares. The MicroStation interface calculates areas and automatically places cells, bearings, and distances. Calculations are controlled through extensive tables that allow you to exactly match your drafting requirements. A module for automatic plan and profile generation is also available. Available in single or multi-user versions. AGEO.PROFILE AGEO.PROFILE is designed to calculate, plan, and profile starting from a 3D coordinate file. Calculations are controlled through extensive tables that allow you to exactly match your plan/profile drafting requirements. You may cruise the entire plan/profile on your screen in AGEO before sending drafting information to MicroStation. The MicroStation interface will send the whole plan/profile calculated with proper cell, line work, and annotations as you require without any link coding in the field. The interface will also cut up a long job into individual map sheets automatically. Available in single or multi-user versions. PC Unix Technicom, Inc. 8087 Trans-Canada Highway Saint-Laurent, PQ H4S 1S4 CANADA Contact: Robert J. Vinette Phone: (514) 332-9022 Fax: (514) 332-9072 Prices: AGEO.EXPERT-$5,500.00 (DOS) AGEO.PROFILE-$2,500.00 (DOS) Standards Manual for U.S. Army Corps of Engineers CADD Systems This manual is composed of two sets of diskettes (one set each for Intergraph Workstation and PC) and four printed documents. These diskettes contain cells, menus, user commands, executables, and C source in the categories of general, civil/site, survey/mapping, geotechnical, architectural, structural, mechanical, electrical, and sanitary engineering. The documents consist of four manuals: The Standards Manual, The User Manual, The System Manual, and The Cell Libraries. Available by mail only. To order, send $50.00 US by check (international money order outside the US) payable to The US Treasury to: U.S. Army Engineer Waterways Experiment Station Attn: CEWES-RF-D (or Dispersing Agent outside US) 3909 Halls Ferry Road Vicksburg, MS 39180-6199 Phone: (601) 634-2151 - for information only Price: $50.00 Order Document: EM 1110-1-1807 ARTIFEX ARTIFEX is an application for architects and civil engineers that consists of three modules. Building-Construction includes automatic calculations of volumes and areas and a reinforced concrete package. All modules are based on a single 3D external building database and are linked to the DGN file by attributes. The user inputs a 3D building model and ARTIFEX computes 3D drawings and intersections while trimming walls and other features automatically. The rc-package is a flexible module for creating bars and mesh reinforcement. Any change on a bar recalculates the drawing. A built-in rc development language allows users to create their own construction. PC SPARC WELLCOM Software GmbH Hauptstrasse 20 6907 Nussloch GERMANY Contact: Thomas Kurtz Phone: (6224) 13549 (From the U.S. 011-49-6224-13549) Fax: (6224) 13836 (From the U.S. 011-49-6224-13836) Price: $4,800.00