HHSCAND.TXT
===========

Although the Windows software included with you ScanMan 256 scanner doesn't
rely on the DOS ScanMan scanner driver (HHSCAND.SYS), we have included the
latest version of DOS ScanMan scanner driver on the ScanMan Install Disk.

You should install this DOS driver in case you have to use your ScanMan 256
scanner with a DOS application, you will need to copy the DOS scanner driver
(HHSCAND.SYS) the root of your boot disk and add the following statement in
your CONFIG.SYS file:

          DEVICE=HHSCAND.SYS /A=aaa/I=ii/D=d

     Where:
       "aaa" is the address used by the scanner
       "ii"  is the Interrupt Request number (IRQ)
       "d"   is the DMA channel number. 

You should use that some values display in the ScanMan Hardware Setup dialog
of the Windows ScanMan software (Choose Acquire in the File menu of FotoTouch
then choose Options in the ScanMan Window, then choose Hardware Setup in the
Options Dialog).

For example, if you are using board address 280, IRQ 7 and DMA 1 the line 
would look like:

          DEVICE=HHSCAND.SYS /A=280 /I=7 /D=1