Electronics and Electrical Engineering EL-FLOW-Electrical & Flowchart Menu EL-FLOW is a menu-driven package for electrical and piping drawing. The menu allows the selection of over 300 cells for power, electrical schematic, instrumentation, and flowchart diagrams. A range of utility user commands are also supplied to simplify the design process. PC AMFAC CAdBASE 175 Botany Road Waterloo, Sydney, NSW 2017 AUSTRALIA Contact: Ron Tuck Phone: (02) 333-0288 (From the U.S. 011-61-2-333-0288) Fax: (02) 333-0299 (From the U.S. 011-61-2-3330299) Price: $360.00 ECOMP-2D and ECOMP-3D ECOMP-2D and ECOMP-3D are cell libraries of components for design and drafting of electronic packaging and the layout of printed circuit boards. The symbols are the industry standard system for the mechanical description and definition of electrical and electronic components. Included are DO, MO, and TO components; N, J, and ND DIP, PGA (Pin Grid Array), LCC (Leadless Chip Carrier), and DIP socket outlines. ECOMP-2D (#3200) has more than 900 cells for top, side, and end views. ECOMP-3D (#3300) has more than 500 true 3D cells using wireframe representation. PC PADS PC PADS is a custom set of pad-stacks and symbols used in the creation of printed circuit board artwork and documentation. PC- PADS contains more than 1100 cells of different pad types and sizes, component outlines, and other symbols that are sized to create 2 to 1 PCB artwork. * 35 Styles of pads * 25 target types * Dip patterns * Hexagon pads * Drill drawing symbols * Connector patterns * Square pads * Shear marks * Solder mask pads * Discrete component patterns * Silk-screen symbols * Flat packs patterns SCHEM-ANSI, SCHEM-JIC, SCHEM-IEC, and SCHEM-LOGIC Each of these is a cell library of electrical and electronic symbols. * SCHEM-ANSI (#3010) symbols are constructed per ANSI/IEEE 315 and 315A for schematic diagrams. Major component groups include amplifiers, capacitors, connectors, diodes, relays, switches, transistors, resistors, and transformers. * SCHEM-JIC (#3020) symbols are constructed per Joint Industrial Council (JIC) specification for schematic diagrams, electrical control, and ladder diagrams. Major component groups include coils, capacitors, diodes, meters, motors, relays, resistors, solenoids, and switches. * SCHEM-IEC (#3030) symbols are constructed per the International Electrical Council (IEC) specification for electrical control and ladder diagrams. Major component groups include fuses, meters, motors, motor controls, relays, and switches. -NC-.i.SCHEM-LOGIC .i.CAD Technology Corp.:SCHEM-LOGIC .i.Electronics and Electrical Engineering:SCHEM-LOGIC * SCHEM-LOGIC includes all the basic logic gates of the TTL series of devices for creating logic diagrams. Major logic symbol groups include: *AND *NOR *OR *NAND *Encoder/Decoder *Flip-Flops *Multiplexers *Converters *Oscillators PC CAD Technology Corp. P.O. Box 034089 Indialantic, FL 32903 Contact: John Boertjens Phone: (407) 773-5142 Fax: (407) 777-7644 Prices: ECOMP-2D-$485.00 ECOMP-3D-$635.00 PC PADS-$295.00 SCHEM-ANSI-$100.00 SCHEM-JIC-$50.00 SCHEM-IEC-$75.00 SCHEM-LOGIC-$225.00 INTER-wire INTER-wire is an application for the design of electrical relay schematics. Symbols are provided according to IEC standards; and a separate symbol editor is included. There is a direct relation between page number and view, and between symbols and the database. There is automatic control of short circuits and parent- child relations. PC Delaware Computing Wattbaan 49 3439 ML Nieuwegein THE NETHERLANDS Contact: C.A. Olieman Phone: (03402) 31822 (From the U.S. 011-31-3402-31822) Fax: (03402) 38984 (From the U.S. 011-31-3402-38984) Price: $3,000.00 Demo available for $50.00. Electrical Transient Analyzer Program (ETAP) ETAP is fully integrated software for the planning and analysis of electric power systems. ETAP's capabilities include short circuit, load flow, motor starting, transient stability, relay coordination, cable ampacity derating, cable pulling, and ground grid. ETAP accomodates 1000 buses and virtually unlimited load feeders. ETAP provides an interface to MicroStation, allowing the electrical engineer to produce overall and detailed (MCC) one-line diagrams- branch elements are routed automatically. ETAP provides options to indicate the results of the load flow and short circuit studies on the one-line diagrams. PC Operation Technology, Inc. 17870 Skypark Circle, #102 Irvine, CA 92714 Contact: Sales Department Phone: (714) 476-8117 or (800) 477-3827 Fax: (714) 476-8814 Price: $11,000.00 Symbol Library-Instrumentation With Details These cell libraries are tutorial-driven - select a major category and another tutorial pops up showing the symbols in the library for that category. Click on the symbol needed and place it in your design. You see the cell before placement; no more memorizing hundreds of cell names or thumbing through catalogs; no more keying in the cell name with AC=. You can modify, add, or delete symbols in these libraries and mold them to your standards. Available for IGDS on the VAX. PC Mac Unix Texas Computer Graphics, Inc. P.O. Box 383 Nederland, TX 77627 Contact: Jerry Jaynes Phone: (409) 724-6200 or 800-735-8786 Fax: (409) 724-6277 Prices: Symbol Library-Electrical With Details-$1,200.00 Symbol Library-Instrumentation With Details-$1,200.00 Demo available. More than 350 cells are included in Symbol Library-Electrical With Details More than 250 cells are included in Symbol Library-Instrumentation With Details