Name: PMWORLD1 (OS/2 PRESENTATIONS) Type: PROGRAM Date: 12-JAN-1991 00:31 by WOODARDC Size: 48128 Count: 11 PMWORLD enables up to 8 Analogue Clocks to be displayed, each showing the current time for a selected location any where in the world. The program also marks the position of the selected locations on a world map drawn by the program. If required, a location can just be marked on the map without a Clock being started. **** Requires OS/2 Presentation Manager. Keywords: OTHER, OS2, PM, PRESENTATION, ANALOG, CLOCKS -*- Name: 22DISK - CPM DISK READER Type: PROGRAM Date: 18-NOV-1989 22DISK Version 1.31 August, 1989 --- 22DISK is a set of programs to copy, format, display and manipulate diskettes written on CP/M systems using your Tandy/IBM compatible computer. Over 100 definitions are provided with the unregistered version; some 200 are provided with the registered product. WHAT'S NEW IN VERSION 1.31? We've made a few minor changes to 22DISK in Version 1.31. The single biggest change is to 22DINST. We now allow specification of a drive's head positioning step rate. And you no longer need 512K to run 22DINST; 256K will work just fine. You also can install on a system with a single diskette drive and no hard disk. Keywords: OTHER, 22DISK, CPM, C/PM, FOREIGN DISK Contents: 1 22DISK PROGRAM FILES (Size: 237867) 2 22DISK DOCUMENTATION FILES (Size: 26833) -*- Name: 22NICE - CPM EMULATOR Type: PROGRAM Date: 17-NOV-1989 Size: 76860 22NICE - A NEW INSYSTEM CP/M 2.2 EMULATOR Version 1.24, November, 1988 22NICE is a Z80/8080 CP/M 2.2 emulator for use on PC-compatible computers. The 22NICE CP/M Emulation package offers the follow- ing features: Emulate 8080/8085/Z80 processors with or without NEC V-series chip installed. Provide terminal emulation for most common CP/M machines with terminal types for Osborne, Heath-Zenith, Morrow, Actrix, DEC, Kaypro, VT-100, VT-52, Televideo 925 and LSI ADM-3X. Supports CP/M user number to DOS subdirectory translation Allows use of DOS "pipes" and utilities with CP/M programs Supports a complete set of BDOS and BIOS function instructions and interfaces, inlcuding direct disk read/write CP/M programs are fully integrated into the DOS environment: the user is unaware that a programs is CP/M or DOS based Keywords: OTHER, CPM, CPM EMULATOR, EMULATOR, 22NICE -*- Name: RAMTEST 3.0 Type: PROGRAM Date: 17-NOV-1989 Size: 57504 R A M T E S T V E R S I O N 3 . 0 You will find this program useful, not only in identifying an existing fault but also as part of a periodic maintenance program. This program has been developed as an exhaustive test of the memory in a PC, XT, AT or any of their clones. It is much more comprehensive than the Power On Self Test and delivers diagnostic messages which are much easier to understand. In addition to system or base memory, RamTest will also test Expanded Memory on all machines and Extended Memory on AT type machines. Keywords: MSDOS, RAMTEST, RAM TEST, MEMORY TEST, DIAGNOSTICS, TESTING -*- Name: CMOS SETUP UTIL. Type: PROGRAM Date: 22-JUN-1988 Size: 36864 GSETUP Ver. 3.0, by Juan Jimenez GSETUP is a generic SETUP program for the IBM-PC/AT Personal Computer and all TRUE compatibles. The program is designed to allow you to set/modify CMOS ram values to tell the system what the time, date, type and number of floppy disk drives and hard disks, monitor type, etc., are for your personal computer. It is similar in concept and design to the SETUP utility that comes with the diagnostics diskette that you get when you buy an IBM-PC/AT, with the notable difference that GSETUP can be run from DOS without having to reset your machine first, and the user interface/menu system is much more "friendly" (I do hate cliches, but "friendly" is all I could come up with, sorry...) Keywords: UTILITIES, CMOS, SYSTEM, DOS, IBM-PC, 1000, 3000, AT, JIMENEZ, SETUP -*- Name: VARISLOW (PC-AT) Type: PROGRAM Date: 10-APR-1988 Size: 2176 VARISLOW, by Ray Usher An AT slowdown utility that allows you to choose the speed at which you want your AT to run. Source code included. Keywords: MSDOS, AT, SLOW, IBM-PC -*- Name: AJ UTILITIES (AT COMPATIBLES) Type: PROGRAM Date: 13-FEB-1988 Size: 47104 AJ UTILITIES, by Alan R. Jones This is a collection of AT related utilities (some will run on XTs). There are a variety of functions available including; Setting 43 line mode for EGA, Automatic timed HD parking, Floppy disk drive emulation in memory, Mass disk duplication, Password encryption of com/exe files, the list goes on... Keywords: MSDOS, AT, DISK, PASSWORD, 3000, 4000, IBM-AT, HARD DRIVES -*- Name: READ/WRITE EXTENDED MEMORY Type: PROGRAM Date: 9-OCT-1987 Size: 29184 Accessing Extended Memory from Turbo C and Turbo Pascal The file is set up to write to, check and read back from upper memory. It does nothing more - but - it is an excellent way to learn "how to" manipulate extended memory. C and Pascal source code is included. Keywords: MISC., MEMORY, EXTENDED, AT, 286, 3000, 4000, IBM-PC -*- Name: PDVIM DEBUGGER Type: PROGRAM Date: 20-SEP-1987 Size: 54272 VIM Ver. 1.01, by DDI VIM stands for VIrtual Machine. The program is an interpreter whose language is 8088 machine code extended with the real-mode instructions of an 80286, with provisions to simulate and/or allow access to the hardware of an XT or AT in an addressing space independent of the normal hardware. VIM was created because a program gone wrong can, and usually will, take out everything it can, including the interrupt vector table. This renders even debuggers that use NMI (Non-Maskable Interrupt) hardware useless. The hardware solution to this problem is either a logic analyzer or an in-circuit emulator, both of which are very expensive and require hardware attachments to the system under test. VIM, on the other hand, presents a simple software solution with most of the power of complex hardware. The recommended configuration is an AT and 640K of RAM. The minimum requirements for running VIM are a PC and 320K of RAM. Keywords: MISC., 80286, PC/AT ONLY, DEBUGGER, PROTECTED MODE, 4000, IBM-PC AT -*- Name: FAST AT (CRYSTAL REPLACEMENT) Type: TRANSCRIPT Date: 29-AUG-1987 Size: 12478 AT CRYSTAL REPLACEMENT, by Stephen Sisler This file was created in response to a request to make a reference guide for speeding up the IBM PC-AT available in the SIG data libraries. It contains information gathered from a number of IBM PC-AT users, companies, and my own experiences. Keywords: MISC., AT ONLY, SPEED UP YOUR PC/AT, CRYSTAL, IBM-PC, TUTORIAL -*- Name: PC/AT DATE-TIME SETTING Type: PROGRAM Date: 29-AUG-1987 Size: 1152 DATE/TIME SETTINGS Ver. 1.4, by Unknown This utility will set the date and time on a PC/AT compatible without the use of Diagnostics. Keywords: MISC., AT ONLY, CLOCKS, TIMES, DATES, IBM-PC -*- Name: PC/AT SETCLOCK Type: PROGRAM Date: 29-AUG-1987 Size: 7168 ATCLOCK Ver 1.3, by Ron Raffensperger This utility will set the system clock in a PC/AT compatible without the use of Diagnostics. Extremely handy utility. ASM source code iincluded. (I have found that using at batch file is the easiest way to utilize this little gem. COPY CON SETIME.BAT TIME SETCLOCK.COM Try this - MISAL) Keywords: MISC., AT ONLY, CLOCK RESET, TIMES, IBM-PC -*- Name: HARD DISK PARAMETER TABLES Type: PROGRAM Date: 29-AUG-1987 Size: 13568 AT HARD DISK PARAMETER TABLES Utility to show # of cylinders, # of heads, write pre-comp, rewrite control byte, landing zone and sectors per track on a PC/AT. Keywords: MISC., IBM-PC, HARD DISK, PARAMETERS, AT -*- Name: HACKROM (PROM BURNER HELP) Type: PROGRAM Date: 26-AUG-1987 Size: 54400 ROM CAPTURE UTILITIES, by Unknown This is a set of utilities that allows the user to capture the contents of the rom sets in either the PC or the AT. It allows the content of the rom to be written to a file called xtrom for the XT or atrom for the AT. A utility called romsplit is provided for the AT that allows the atrom file to be split into two files that represent the even and odd bytes and which are called tempeven and tempodd, respectively. Note that this is not necessary for the XT. Another utility called lsplit is provided to allow the large files produced by romsav to be split into files that will fit into the desired destination eproms. For prom burners that accept data format in the Motorola S record format, a utility called binex is provided that converts a binary file into standard S record format. Original Author UNKNOWN, more routines added by Allan Teo. Keywords: MISC., IBM-PC, AT, ROMS, EEPROMS -*- Name: EGA-ROIDS - EGA GAME Type: PROGRAM Date: 8-MAR-1987 Size: 43520 ***** REQUIRES AN EGA CARD AND IBM PC-AT COMPATIBLE ***** EGA-roids is similar to the arcade game "Asteroids". It is a very good game for the EGA and a 80286 computer (IBM PC-AT compatible). Enjoy! Keywords: MISC., SCREENS, GAME, EGA, 80286, 3000, ASTEROIDS, IBM PC-AT, GRAPHICS, COLOR -*- Name: PRCMPIF.ARC -- WINDOWS PIF FILE Type: PROGRAM Date: 25-FEB-1987 Size: 128 This is a PIF file for procomm that allows procomm to be used in a window. Because this sets up procomm to write to the screen via dos, it slows output down considerably on an AT. It therefore should probably not be used on a slower machine. REMEMBER to change the execution address for procomm to suit your configuration. Keywords: PROGRAMS, PROCOMM, WINDOWS, PIF -*- Name: DWP-410 LINEFEED SUPPRESSOR Type: PROGRAM Date: 21-JUL-1985 Size: 141 If you have a DWP-410 and want to use it on a non-Tandy computer, then this program is for you. Just type its name, NLOFF.COM, at the MS-DOS prompt, and the DWP-410 will stop ignore the extra linefeed sent out by most non-Tandy software (in a CR/linefeed combination). Once executed, all the linefeeds in a CR/linefeed combination will be suppressed, regardless of which software is in use. Written by Larry Payne. Keywords: UTILITY, LINEFEED SUPPRESSION, DWP-410, LARRY PAYNE, IBM-PC