NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:              ATTOKLLC.NLM v3.1
DOCUMENT ID:        TID350000
DOCUMENT REVISION:  B
DATE:               16SEP93
ALERT STATUS:       Yellow
INFORMATION TYPE:   Symptom Solution
README FOR:         ATOK31.EXE

NOVELL PRODUCT and VERSION:
NetWare for Macintosh 3.011

ABSTRACT:
This is the ATTOKLLC.NLM v3.1, which allows Macintoshes to communicate in a
source routing environment.  This version 3.1 updates the 3.0 release and
adds support for non-IBM Token Ring LAN cards, while continuing to support
the IBM Token Ring LAN cards.  This NLM was also modified to allow IBM
PCs/Compatibles running the Farallon PhoneNet Talk software, on a Token
Ring network, to communicate properly with the NetWare v3.11 server.
________________________________________________________________

DISCLAIMER
THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL. 
NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. 
HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION
ONLY.  NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS
INFORMATION.
________________________________________________________________

Self-Extracting File Name:  ATOK31.EXE      Revision:  B

Files Included      Size     Date       Time

\
ATOK31.TXT                (This File)
ATTOKLLC.NLM        3477   06-23-92    05:59p


The ATTOKLLC.NLM is needed in a source routing environment when either an
Apple Internet Router or Apple TokenTalk 16/4 interface card is used on the
network.  This NLM will respond to the 802.2 LLC Test Poll frames that are
sent by the Apple products.  The ATTOKLLC NLM registers a Source and
Destination SAP of AA (Snap) and a command of F3 (Test Poll) with the LSL
so that the proper response (Test Poll Final) can be returned to the
sending node.

A previous version, ATTOKLLC.NLM v3.0, that shipped with NetWare for
Macintosh v3.0, 3.01, and 3.011, would only support the IBM Token Ring
adapter.  This new version, ATTOKLLC.NLM v3.1, supports the IBM adapters as
well as other third party Token Ring adapters.

Additionally, Version 3.1 ATTOKLLC was created to register an additional
frame type with the LSL, an SSAP of AA, DSAP of 00, and command F3.  The
modification was necessary to allow IBM PCs/Compatibles running the
Farallon PhoneNet Talk software, on a Token Ring network, to communicate
properly with the NetWare v3.11 server.


To install:

 (a) Copy ATTOKLLC.NLM to SYS:\SYSTEM.
 
 (b) If ATTOKLLC is installed on the server already:
 
     At the CONSOLE prompt, enter the following commands:

        UNBIND ATTOKLLC from <name>, where <name> is the
        name of the TOKEN.LAN driver loaded with a
        frame type of TOKEN-RING.

        UNLOAD ATTOKLLC
 
        LOAD ATTOKLLC
        
        BIND ATTOKLLC to <name>, where <name> is the
        name of the TOKEN.LAN driver loaded with a
        frame type of TOKEN-RING.
	

     Otherwise, add the following lines to AUTOEXEC.NCF:

        LOAD ATTOKLLC

        BIND ATTOKLLC to <name>, where <name> is the
        name of the TOKEN.LAN driver loaded with a
        frame type of TOKEN-RING.

        DOWN and Re-boot the server, or type in the above
        commands at the CONSOLE prompt.
ÿ