July 27, 1993

These instructions are intended for users of communications software which is
NOT specific to the CompuServe interface.  Procedures for users of CIS specific
software will differ somewhat from those described here.

1)   If you know the name of the forum in which you wish to post a message,
     type GO (FORUM NAME) and press enter - then move to step number 5.  If
     you do not know which forum you wish to visit, type GO NETWIRE and
     press enter.  If you type GO NETWIRE, you'll receive this menu:

               MAIN MENU

1) What's New
2) Service and Support
3) Sales and Marketing
4) Novell Programs
5) About the Network Support Encyclopedia
6) New User Information
7) CompuServe Information Service

2)   Select option 2 (Service and Support).  Then, select option  2 (Messages 
 Questions and Answers) and you will see this menu:

 1 Description of Message Forums
 2 Novell General Forum "A"           (GO NOVA)
 3 Novell General Forum "B"           (GO NOVB)
 4 Novell General Forum "C"            (GO NOVC)
 5 Novell Vendors Forum               (GO NOVVEN)
 6 Novell Desktop Systems Group Forum (GO NDSG)
 7 NetWare 2.x Forum                  (GO NETW2X)
 8 NetWare 3.x Forum                  (GO NETW3X)
 9 NetWare 4.x Forum                  (GO NETW4X)
             
3)   An "!" prompt will result.
4)   Select the forum where the message is to be posted by typing the
     appropriate number and pressing the enter key.
5)   A "Forum" prompt will result.
6)   Type "messages" and press enter.
7)   A "Messages" prompt will result.
8)   Type "Compose" and press enter.
9)   Enter the text of the message.  When the message is complete, type "/exit"
     on a blank line to signify the end of the message.
10)  A "Post Action" prompt results.
11)  Type the word "Post" and press return.
12)  You will be prompted for "Name and/or UserID".  Either enter the correct
     name and/or UserID, or simply address the message to "SysOp" or "All".
13)  You will then be prompted for a subject.  Enter a three or four word
     description of the subject matter.  (24 character maximum)
14)  A list of available sections will appear.  Select the correct section and press
     enter.  (A list of sections is available in FRMORG.TXT)
15)  You will be asked if the information is correct.  Respond to "Is this Correct
     Y/N" appropriately.  (The N response will allow you to re-enter the Subject
     and Section only)
16)  If you select "Y" to the above, the you will be told the message has been
     posted.
17)  If you are finished with your CompuServe needs, type /BYE and you will be
     logged out.  If you need to post other messages type /GO FORUM (with
     FORUM representing the forum you wish to visit).  Then return to step 8.

Note:  Remember to end your  questions with a question  mark.  Some of our 
technicians will search on"?" when responding to questions.