NetWare v3.11 SNMP Agent Upgrade Version 2.1

============================================================================
Installation Instructions
============================================================================

The SNMP Agent for NetWare (NetWare SNMP) NetWare Loadable Module (NLM)
file, SNMP.NLM, performs NetWare SNMP services. The NetWare SNMP Upgrade
Diskette allows you to upgrade NetWare SNMP on NetWare v3.11 servers.

For NetWare v3.11, NetWare SNMP also depends on another NLM, the AFTER311
NLM. Furthermore, you must load the TCP/IP NLM if the SNMP management 
stations you run use IP as their transport mechanism. This file explains
how to install these NLM files on a NetWare v3.11 server.

!!WARNING!!	When you install NetWare SNMP, always use the NetWare SNMP 
		installation program from the NetWare SNMP Upgrade diskette.

		The installation program on the Upgrade diskette contains
		version checking to prevent existing versions of NetWare SNMP
		from being incorrectly overwritten. This version checking 
		is extremely important. For example, NetWare MultiProtocol 
		Router software v2.0 or later, WAN Links software v2.0 or 
		later, and NetWare v4.0 already contain coordinated versions 
		of the NetWare SNMP NLM and related NLM files. Installing 
		the NetWare SNMP Upgrade without using the version checking 
		can overwrite existing NLM files and disable services,
		such as routing, that depend on these files.

		Since the NetWare SNMP NLM depends on other NLM files you
		*must* use the installation program. Do NOT simply copy the
		NetWare	SNMP NLM to the server.

You can install NetWare SNMP either at the server where it will run (local
installation) or from a workstation attached to the server (remote 
installation). This file describes both methods.

============================================
Installing the NetWare SNMP software locally
============================================

To install the NetWare SNMP Upgrade at the server, complete the following 
steps:

1.  From the server console, type the following command:
	LOAD INSTALL <Enter>

2.  At the Install NLM screen, select Product Options.

3.  Press <Insert> to add a new product.

4.  At the prompt, insert the Upgrade diskette in the disk drive. If the 
    diskette is not in drive A:, change the drive letter to the correct 
    letter. Then, press <Enter> to start the installation.

5.  When installation is complete, Press <Esc> to get to the Main menu.

6.  Select System Options.

7.  Select Edit AUTOEXEC.NCF File.

8.  Add the following line to the AUTOEXEC.NCF file:
	LOAD SNMP
    Include command-line options as needed; see either the "NetWare v3.11 
    TCP/IP Transport Supervisor's Guide" or the "SNMP Agent for NetWare
    Developer's Guide" for information about these options.

9.  Press <Esc> to exit.

10. Answer "Y" to save the edits to the AUTOEXEC.NCF file.

11. Press <Esc> to exit to the Main Installation menu.

12. Press <Esc> to exit the Install NLM.

13. Bring down the server by typing the following commands:
	DOWN
	EXIT

14. Restart the server by typing the following command:
	SERVER

The NetWare SNMP NLM and associated NLM files are now installed on
the server.

=============================================
Installing the NetWare SNMP software remotely
=============================================

To install the NetWare SNMP Upgrade from a workstation, log into the 
server where you are installing NetWare SNMP and complete the following
steps:

1.  Create the directory SYS:SNMP_1 on the server by entering the 
    following commands at your workstation:
	MAP Q:=SYS:
	Q:
	MD SNMP_1
	CD SNMP_1

2.  Insert the Upgrade diskette into your disk drive and copy the files
    and subdirectories from the Upgrade diskette into the SYS:SNMP_1
    directory, as follows, where driveLetter is the letter of the disk
    drive the diskette is in:
	XCOPY /S /A driveLetter:*.* Q:\SNMP_1

3.  Run RCONSOLE.

4.  Load the Install NLM by typing the following command:
	LOAD INSTALL

5.  At the Install NLM screen, select Product Options.

6.  Press <Insert> to add a new product.

7.  At the prompt, type SYS:SNMP_1 and press <Enter>.

8.  When installation is complete, Press <Esc> to get to the Main menu.

9.  Select System Options.

10. Select Edit AUTOEXEC.NCF File.

11. Add the following line to the AUTOEXEC.NCF file:
	LOAD SNMP
    Include command-line options as needed; see either the "NetWare v3.11 
    TCP/IP Transport Supervisor's Guide" or the "SNMP Agent for NetWare 
    Developer's Guide" for information about these options.

12. Press <Esc> to exit.

13. Answer "Y" to save the edits to the AUTOEXEC.NCF file.

14. Press <Esc> to exit to the Main Installation menu.

15. Press <Esc> to exit the Install NLM.

16. Bring down the server by typing the following commands:
	DOWN
	EXIT

17. Restart the server by typing the following command:
	SERVER

The NetWare SNMP NLM and associated NLM files are now installed on 
the server.