After several days and many man hours, I found a set of parameters
which will let WinFax Pro 4.0 run on OS/2 2.11.  I don't guarantee
that these settings will work for everyone, but they work well on this
system.  By the way,  you will need to replace the COM.SYS and VCOM.SYS 
with the SIO.SYS and VSIO.SYS drivers from Raymond L. Gwinn.  You can get
this set of drivers by downloading SIO126.ZIP from Compusrv and following
the instructions.

GOOD LUCK!


WINOS2 SETTINGS FOR WINFAX PRO 4.0 WITH OS/2 2.11
        WINOS2 FULLSCREEN

NEC READY 433 WITH OVERDRIVE CHIP.  USING COM2 (ON PLANAR BOARD)
28 MEG MEMORY


WIN_RUN_MODE                3.1 ENHANCED COMPATIBILITY
WIN_DDE                     OFF
WIN_CLIPBOARD               OFF
DOS_AUTOEXEC                C:\WINOS2.BAT
DOS_BACKGROUND_EXECUTION    ON
DOS_BREAK                   ON
DOS_DEVICE                  n/a
DOS_FCBS                    16
DOS_FCBS_KEEP               10
DOS_FILES                   30
DOS_HIGH                    ON
DOS_LASTDRIVE               M
DOS_RMSIZE                  640
DOS_SHELL                   C:\OS2\MDOS\COMMAND.COM C:\OS2\MDOS /P
DOS_STARTUP_DRIVE           n/a
DOS_UMB                     ON
DOS_VERSION                 n/a
DPMI_DOS_API                AUTO
DPMI_MEMORY_LIMIT           8
DPMI_NETWORK_BUFF_SIZE      8
HW_NOSOUND                  OFF
HW_ROM_TO_RAM               OFF
HW_TIMER                    ON
IDLE_SECONDS                0
IDLE_SENSITIVITY            100
INT_DURING_IO               ON
KBD_ALTHOME_BYPASS          ON
KBD_BUFFER_EXTEND           ON
KBD_CTRL_BYPASS             CTRL_ESC
KBD_RATE_LOCK               OFF
MEM_EXCLUDE_REGIONS         n/a
MEM_INCLUDE_REGIONS         n/a
MOUSE_EXCLUSIVE_ACCESS      OFF
PRINT_SEPARATE_OUTPUT       ON
PRINT_TIMEOUT               5
SIO_ALLOW_ACCESS_COM1       ON
SIO_ALLOW_ACCESS_COM2       ON
SIO_ALLOW_ACCESS_COM3       ON
SIO_ALLOW_ACCESS_COM4       ON
SIO_IDLE_SENSITIVITY        100
SIO_MODE_DTR                TURN ON AT OPEN, OFF AT CLOSE
SIO_MODE_FIFO_LOAD_COUNT    16
SIO_MODE_IDSR               IGNORE DSR DURING RECEIVE
SIO_MODE_OCTS               HANDSHAKE SIGNAL, AS IN RTS/CTS
SIO_MODE_ODSR               IGNORE DSR DURING TRANSMIT
SIO_MODE_RTS                HANDSHAKE SIGNAL, AS IN RTS/CTS
SIO_MODE_XON/XOFF           NO XON/XOFF FLOW CONTROL BY SIO
SIO_SCREEN_SYNC_KLUDGE      OFF
SIO_SHARE_ACCESS_WITH_OS/2  OFF
SIO_VIRTUALIZE_16550A       OFF
SIO_VIRTUALIZE_COM_PORTS    ON
VIDEO_8514A_XGA_IOTRAP      OFF
VIDEO_FASTPAST              OFF
VIDEO_MODE_RESTRICTION      NONE
VIDEO_ONDEMAND_MEMORY       ON
VIDEO_RETRACE_EMULATION     OFF
VIDEO_ROM_EMULATION         ON
VIDEO_SWITCH_NOTIFICATION   ON
VIDEO_WINDOW_REFRESH        1
XMS_HANDLES                 32
XMS_MEMORY_LIMIT            16384
XMS_MINIMUM_HMA             0
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*



****************************************
Fax/modem Tests  [Apr 24 1994 -- 17:57]
****************************************
CAS drivers are not installed on this system

WinFax PRO 4.0 detected
WinFax is not currently running

WinFax TSR is not currently running

Finding COM Ports...
** If the system locks up at this point while searching for COM ports,  there is likely an IRQ conflict. **

COM1 is available for testing
COM2 is available for testing
COM3 is available for testing

COM1 selected for testing

COM1 Opening...
    COM1 is open

COM1 Initializing...
    COM1 initialized at 2400

Address and IRQ...
    (3F8h, IRQ4) 

COM1 Response Test...
  [ATE0]
  -> ATE0
  -> OK
  -> 
  [ATE0]
  -> 
  -> OK
  -> 
Modem is responding

COM1 Class Test...
  [ATI3]
  -> 
  -> PM14400FXSA [0A4]  Version 1.15m (c) Practical Peripherals Inc., 1992.
  -> 
  -> OK
  -> 
  [AT+FCLASS=?]
  -> 
  -> 0,1
  -> 
  -> OK
  -> 
  [AT+FCLASS=0]
  -> 
  -> OK
  -> 
Fax/modem should be configured as a Class 1 device.

COM1 Speed Test...
  [AT+FCLASS=1]
  -> 
  -> OK
  -> 
  [AT+FTM=?]
  -> 
  -> 24,48,72,73,74,96,97,98,121,122,145,146
  -> 
  -> OK
  -> 
Maximum Fax Transmit Speed:   14400  bps
  [AT+FRM=?]
  -> 
  -> 24,48,72,73,74,96,97,98,121,122,145,146
  -> 
  -> OK
  -> 
  [AT+FCLASS=0]
  -> 
  -> OK
  -> 
Maximum Fax Receive Speed:    14400  bps

COM1 Manufacturer Test...
  [ATI0]
  -> 
  -> 14400
  -> 
  -> OK
  -> 
  [ATI1]
  -> 
  -> 039
  -> 
  -> OK
  -> 
  [ATI2]
  -> 
  -> OK
  -> 
  -> OK
  -> 
  [ATI3]
  -> 
  -> PM14400FXSA [0A4]  Version 1.15m (c) Practical Peripherals Inc., 1992.
  -> 
  -> OK
  -> 
  [ATI4]
  -> 
  -> a097840F284C6703F
  -> 
  -> bC60004000
  -> 
  -> r1001111171012000
  -> 
  -> r3000111010000000
  -> 
  -> OK
  -> 
  [ATI5]
  -> 
  -> 4.3
  -> 
  -> OK
  -> 
  [ATI6]
  -> 
  ->                     PM14400FX Data Connection Information
  -> 
  -> Link Statistics:
  -> 
  ->      Characters Sent:          0         Characters Received:          0
  ->      Octets Sent:              0         Octets Received:              0
  ->      Packets Sent:             0         Packets Received:             0
  ->      NAKs Sent:                0         NAKs Received:                0
  -> 
  -> 
  -> Link Details:
  -> 
  ->      Last Number Called: 
  ->      Connection Time:    00:00:00
  -> 
  ->      Mode:         &Q5                   DCE Speed:  14400
  ->      Protocol:                           DTE Speed:  2400
  ->      Compression:                        DTE Parity: None
  ->      Flow Control: &K3
  -> 
  ->      Call Termination: 
  -> 
  -> OK
  -> 
  [ATI7]
  -> 
  -> ERROR
  -> 
  [ATI8]
  -> 
  -> ERROR
  -> 
  [ATI9]
  -> 
  -> ERROR
  -> 

COM1 Test Results
The COM port test was successful. The modem appears to be working.

COM2 selected for testing

COM2 Opening...
    COM2 is open

COM2 Initializing...
    COM2 initialized at 2400

Address and IRQ...
    (2F8h, IRQ3) 

COM2 Response Test...
  [ATE0]
  -> ATE0
  -> OK
  -> 
  [ATE0]
  -> 
  -> OK
  -> 
Modem is responding

COM2 Class Test...
  [ATI3]
  -> 
  -> AF-C2500-E0
  -> 
  -> OK
  -> 
  [AT+FCLASS=?]
  -> 
  -> 0,1
  -> 
  -> OK
  -> 
  [AT+FCLASS=0]
  -> 
  -> OK
  -> 
Fax/modem should be configured as a Class 1 device.

COM2 Speed Test...
  [AT+FCLASS=1]
  -> 
  -> OK
  -> 
  [AT+FTM=?]
  -> 
  -> 24,48,72,96
  -> 
  -> OK
  -> 
Maximum Fax Transmit Speed:   9600  bps
  [AT+FRM=?]
  -> 
  -> 24,48
  -> 
  -> OK
  -> 
  [AT+FCLASS=0]
  -> 
  -> OK
  -> 
Maximum Fax Receive Speed:    4800  bps

COM2 Manufacturer Test...
  [ATI0]
  -> 
  -> 242
  -> 
  -> OK
  -> 
  [ATI1]
  -> 
  -> 691
  -> 
  -> OK
  -> 
  [ATI2]
  -> 
  -> OK
  -> 
  -> OK
  -> 
  [ATI3]
  -> 
  -> AF-C2500-E0
  -> 
  -> OK
  -> 
  [ATI4]
  -> 
  -> ERROR
  -> 
  [ATI5]
  -> 
  -> ERROR
  -> 
  [ATI6]
  -> 
  -> ERROR
  -> 
  [ATI7]
  -> 
  -> ERROR
  -> 
  [ATI8]
  -> 
  -> ERROR
  -> 
  [ATI9]
  -> 
  -> ERROR
  -> 

COM2 Test Results
The COM port test was successful. The modem appears to be working.

COM3 selected for testing

COM3 Opening...
    COM3 is open

COM3 Initializing...
    COM3 initialized at 2400

Address and IRQ...
    (3E8h, IRQ4) 

COM3 Response Test...
  [ATE0]
  -> 
  [ATE0]
  -> 
Either there is no modem on the selected port or it is not responding.

COM3 Test Results
Delrina TEST did not detect a modem on this port.

****************************************
Settings Tests  [Apr 24 1994 -- 17:59]
****************************************
Selected SYSTEM.INI Settings

[boot]
WAVDMApps = 
MAVDMApps = 
shell = progman.exe
mouse.drv = mouse.drv
language.dll = 
comm.drv = wfxcomm.drv
keyboard.drv = keyboard.drv
system.drv = atmsys.drv
386grabber = VGA.3GR
oemfonts.fon = vgaoem.fon
286grabber = VGACOLOR.2GR
fixedfon.fon = vgafix.fon
fonts.fon = vgasys.fon
display.drv = wspdsf.drv
drivers = mmsystem.dll
SCRNSAVE.EXE = (None)
atm.system.drv = system.drv
useos2shield = 1
os2shield = winsheld.exe
sdisplay.drv = wspdssf.drv
network.drv = 
os2gdi.exe = GDI.EXE
os2user.exe = user.exe

[386Enh]
device=ad.386
mouse=lvmd.386
network=*dosnet, *vnetbios
ebios=*ebios
woafont=dosapp.fon
display=*VDDVGA
EGA80WOA.FON=EGA80WOA.FON
EGA40WOA.FON=EGA40WOA.FON
CGA80WOA.FON=CGA80WOA.FON
CGA40WOA.FON=CGA40WOA.FON
32BitDiskAccess=on
device=*int13
device=*wdctrl
device=lanman10.386
keyboard=*vkd
device=vtdapi.386
device=*vpicd
device=*vtd
device=*reboot
device=*vsd
device=*v86mmgr
device=*pageswap
device=*dosmgr
device=*vmpoll
device=*wshell
device=*BLOCKDEV
device=*PAGEFILE
device=*vfd
device=*parity
device=*biosxlat
device=*vcd
device=*vmcpd
device=*combuff
device=*cdpscsi
local=CON
FileSysChange=off
device=vsbpd.386
device=*vdmad
PagingFile=C:\WINDOWS\WIN386.SWP
MaxPagingFileSize=35568
COM1Irq=4
COM1Base=03F8
OverlappedIO=off
COM1FIFO=2
COM1TxSize=16
COM1RxSize=8
COM2Irq=3
COM2Base=02F8


Selected WIN.INI Settings

[WINFAX]
UserName = Herb Benton
CompanyName = CST Client Server Technologies
LicenseNumber = .........................
ExePath = D:\WINFAX\
Fax Path = D:\WINFAX\DATA\
Cover Path = D:\WINFAX\COVER\
PhoneBook = Default
imodemdesc = Generic CLASS 1 (Hardware Flow Control)
Version = 4.0
ModemTag = 11001146
Registered = Yes
Paper Format = Letter (8.5 x 11 inches)
Orientation = Portrait
Resolution = Standard

[ports]
LPT3.OS2 = 
LPT1: = 
LPT2: = 
LPT3: = 
COM1: = 9600,n,8,1,p
COM2: = 9600,n,8,1,x
COM3: = 9600,n,8,1,x
COM4: = 9600,n,8,1,x
EPT: = 
FILE: = 
LPT1.DOS = 
LPT2.DOS = 
FaxModem = FaxModem

[PrinterPorts]
Generic / Text Only = TTY,COM1:,45,15
HP LaserJet Series II = HPPCL,LPT1:,15,45
IBM Laser Printer 4019 = ibm4019,LPT1:,15,45
IBM LaserPrinter 4019 PS17 = pscript,LPT1.DOS,45,15,LPT1:,45,15
IBM LaserPrinter 4029 PS17 = pscript,LPT1:,15,90
QMS ColorScript 100 = pscript,LPT2.OS2,45,15
WinFax = WinFax,COM2:,15,45

[devices]
Generic / Text Only = TTY,COM1:
HP LaserJet Series II = HPPCL,LPT1:
IBM Laser Printer 4019 = ibm4019,LPT1:
IBM LaserPrinter 4019 PS17 = pscript,LPT1.DOS,LPT1:
IBM LaserPrinter 4029 PS17 = pscript,LPT1:
QMS ColorScript 100 = pscript,LPT2.OS2
WinFax = WinFax,COM2:

****************************************
C:\AUTOEXEC.BAT
****************************************
@ECHO OFF
ECHO.
PROMPT $i$p$g
REM SET DELDIR=C:\DELETE,512;D:\DELETE,512;E:\DELETE,512;F:\DELETE,512;G:\DELETE,512;
PATH C:\OS2;C:\OS2\MDOS;D:\OS2\MDOS\WINOS2;C:\;
LOADHIGH APPEND C:\OS2;C:\OS2\SYSTEM;
SET TMP=C:\
REM LOADHIGH DOSKEY FINDFILE=DIR /A /S /B $*
REM DOSKEY EDIT=QBASIC/EDITOR $*
REM SET DIRCMD=/A
 
****************************************
C:\CONFIG.SYS
****************************************
PROTSHELL=C:\OS2\PMSHELL.EXE
SET USER_INI=C:\OS2\OS2.INI
SET SYSTEM_INI=C:\OS2\OS2SYS.INI
SET OS2_SHELL=C:\OS2\CMD.EXE
SET AUTOSTART=PROGRAMS,TASKLIST,FOLDERS,CONNECTIONS
SET RESTARTOBJECTS=STARTUPFOLDERSONLY
SET RUNWORKPLACE=C:\OS2\PMSHELL.EXE
SET COMSPEC=C:\OS2\CMD.EXE
LIBPATH=F:\LM11;F:\IBMEXQ\DLL;C:\IBMCOM\DLL;C:\MUGLIB\DLL;.;D:\SQLLIB\DLL;C:\DSS;D:\IBMLAN\NETLIB;C:\OS2\DLL;F:\CMLIB\DLL;C:\OS2\MDOS;C:\;C:\OS2\APPS\DLL;D:\IBMWF\DLL;D:\IBMC\DLL;D:\BOOKMGR;
SET PATH=.;D:\SQLLIB;C:\DSS;D:\IBMLAN\NETPROG;C:\MUGLIB;C:\OS2;F:\CMLIB;C:\OS2\SYSTEM;D:\OS2\MDOS\WINOS2;C:\OS2\INSTALL;C:\;C:\OS2\MDOS;C:\OS2\APPS;D:\IBMWF\BIN;D:\IBMC\BIN;D:\BOOKMGR;F:\PRODTOOL\OS2MEMU;
SET DPATH=.;C:\IBMCOM;D:\SQLLIB;C:\DSS;D:\IBMLAN\NETPROG;D:\IBMLAN;C:\MUGLIB;C:\OS2;F:\CMLIB;C:\OS2\SYSTEM;D:\OS2\MDOS\WINOS2;C:\OS2\INSTALL;C:\;C:\OS2\BITMAP;C:\OS2\MDOS;C:\OS2\APPS;D:\IBMC\LOCALE;D:\IBMC\HELP;D:\BOOKMGR;F:\PRODTOOL\OS2MEMU;
SET PROMPT=$i[$p]
SET HELP=.;D:\SQLLIB;C:\DSS;C:\OS2\HELP;C:\OS2\HELP\TUTORIAL;c:\paktools;D:\IBMWF\HELP;D:\IBMC\HELP;D:\BOOKMGR;F:\CMLIB;
SET GLOSSARY=C:\OS2\HELP\GLOSS;
SET IPF_KEYS=SBCS
PRIORITY_DISK_IO=NO
FILES=30
DEVICE=C:\IBMCOM\PROTOCOL\LANPDD.OS2
DEVICE=C:\IBMCOM\PROTOCOL\LANVDD.OS2
DEVICE=C:\IBMCOM\LANMSGDD.OS2 /I:C:\IBMCOM
DEVICE=C:\IBMCOM\PROTMAN.OS2 /I:C:\IBMCOM
DEVICE=C:\OS2\TESTCFG.SYS
DEVICE=C:\OS2\DOS.SYS
DEVICE=C:\OS2\PMDD.SYS
BUFFERS=70
IOPL=YES
rem DISKCACHE=2048,LW,AC:C
DISKCACHE=4096,LW,128,AC:CDEF
MAXWAIT=3
MEMMAN=SWAP,PROTECT
SWAPPATH=D:\ 2048 2048
BREAK=OFF
THREADS=2048
PRINTMONBUFSIZE=134,134,134
COUNTRY=001,C:\OS2\SYSTEM\COUNTRY.SYS
SET KEYS=ON
REM SET DELDIR=C:\DELETE,512;D:\DELETE,512;E:\DELETE,512;
BASEDEV=PRINT01.SYS
BASEDEV=IBM1FLPY.ADD
BASEDEV=IBM1S506.ADD
BASEDEV=OS2DASD.DMD
SET BOOKSHELF=D:\SQLLIB\BOOK;D:\IBMLAN\BOOK;C:\OS2\BOOK;D:\IBMWF\HELP;D:\IBMC\HELP;F:\CMLIB\BOOK;
SET EPMPATH=C:\OS2\APPS;
PROTECTONLY=NO
SHELL=C:\OS2\MDOS\COMMAND.COM C:\OS2\MDOS /P
FCBS=16,8
RMSIZE=640
DOS=LOW,NOUMB
DEVICE=C:\OS2\MDOS\VDPX.SYS
DEVICE=C:\OS2\MDOS\VXMS.SYS /UMB
DEVICE=C:\OS2\MDOS\VDPMI.SYS
DEVICE=C:\OS2\MDOS\VCDROM.SYS
DEVICE=C:\OS2\MDOS\VWIN.SYS

DEVICE=C:\OS2\OPTICAL.SYS /N:4

DEVICE=C:\OS2\OS2CDROM.DMD /Q
IFS=C:\OS2\CDFS.IFS /Q
SET SQLNETB=32
BASEDEV=OS2SCSI.DMD

rem DEVICE=C:\OS2\COM.SYS
rem DEVICE=C:\OS2\MDOS\VCOM.SYS
DEVICE=C:SIO.SYS
DEVICE=C:VSIO.SYS

CODEPAGE=437,850
DEVINFO=KBD,US,C:\OS2\KEYBOARD.DCP
BASEDEV=T13BSCSI.ADD /U

SET VIDEO_DEVICES=VIO_SVGA
SET BOOKMGR=D:\BOOKS;G:\$DB2OS2;
SET IBMAV=D:\IBMAV
REM RUN=C:\OS2\EPW.EXE
REM RUN=C:\OS2\EPWROUT.EXE 1
RUN=C:\IBMCOM\PROTOCOL\NETBIND.EXE
RUN=C:\IBMCOM\LANMSGEX.EXE
DEVICE=C:\IBMCOM\PROTOCOL\NETBEUI.OS2
DEVICE=D:\IBMLAN\NETPROG\RDRHELP.200
IFS=D:\IBMLAN\NETPROG\NETWKSTA.200 /I:D:\IBMLAN /N
DEVICE=C:\IBMCOM\PROTOCOL\NETBIOS.OS2
DEVICE=C:\IBMCOM\PROTOCOL\LANDD.OS2
DEVICE=C:\IBMCOM\PROTOCOL\LANDLLDD.OS2
DEVICE=C:\IBMCOM\MACS\OLITOK16.OS2
RUN=C:\IBMCOM\PROTOCOL\LANDLL.EXE
RUN=D:\IBMLAN\NETPROG\LSDAEMON.EXE
RUN=C:\OS2\SYSTEM\LOGDAEM.EXE
DEVICE=C:\OS2\LOG.SYS
SET DSSPATH=C:\DSS;
SET DSSDIR=C:\DSS\WORK;
SET INCLUDE=D:\SQLLIB;D:\IBMC\INCLUDE
SET LIB=D:\SQLLIB;D:\IBMC\LIB
SET HELPNDX=DDE4.NDX
SET QRWDR=C
SET QRWINST=D:\SQLLIB

DEVICE=F:\CMLIB\ACSLANDD.SYS
DEVICE=F:\CMLIB\CMKFMDE.SYS
SET CMPATH=F:\CMLIB
DEVICE=D:\IBMLAN\NETPROG\VNETAPI.OS2
RUN=D:\IBMLAN\NETPROG\VNRMINIT.EXE
REM *LM11******************************************************
REM *LM11*ADDED BY IBM LAN MANAGER 1.1 INSTALL - KEEP LAST IN CONFIG.SYS !
REM *LM11******************************************************
REM DEVICE=F:\LM11\EVYDD.SYS
DEVICE=C:\OS2\MDOS\VSVGA.SYS
SET VIO_SVGA=DEVICE(BVHVGA,BVHSVGA)
DEVINFO=SCR,VGA,C:\OS2\VIOTBL.DCP
DEVICE=C:\OS2\MDOS\VMOUSE.SYS 
DEVICE=C:\OS2\POINTDD.SYS 
DEVICE=C:\OS2\MOUSE.SYS 
rem DEVICE=F:\PRODTOOL\OS2MEMU\OS20MEMU.SYS
 
****************************************
D:\OS2\MDOS\WINOS2\WINFAX.INI
****************************************
[WinFax Importers]
Windows Bitmap (*.bmp)=BMP,DTIFLBMP.DLL,*.BMP
Windows Metafile (*.wmf)=WMF,DTIFLWMF.DLL,*.WMF
TIFF (*.tif)=TIF,DTIFLTIF.DLL,*.TIF
PC Paintbrush (*.pcx)=PCX,DTIFLPCX.DLL,*.PCX
GEM Image (*.img)=IMG,DTIFLIMG.DLL,*.IMG
GEM Metafile (*.gem)=GEM,DTIFLGEM.DLL,*.GEM
Mac Paint (*.bin)=PNT,DTIFLPNT.DLL,*.BIN
Encap. Postscript (*.eps)=EPS,DTIFLEPS.DLL,*.EPS
Gr. Interchange (*.gif)=GIF,DTIFLGIF.DLL,*.GIF
WinFax (*.fxs)=FXS,DTIFLFXS.DLL,*.FXS

[General]
FontMapUnit=5
Show Thumbnails=Yes
AutoShowKeyDialog=No
PreviewFax=No
AutoAddAttachments=Yes
Dial Control=All Events
Volume=Low
Speaker Mode=Off
Dial Mode=Tone
Partial Match=Yes
Use cover text=No
logo=
Cover Font=Normal
XGrid=0000000040
YGrid=0000000040
HidePollingSeparator=0
RegInitString=AT&FB0E0V1M1L2X4&D2S7=55\
Fax Device=Class1
MenuHook=0
ComPort=COM2
HdwFlowControl=1
Modem=AT&F&C1&D2S7=55\
Terminate=ATH
ModemMaxRate=14400
ECMFaxSend=0
MaxTxRate=14400
MinTxRate=2400
Retries=2
Retry Time=90
ActiveWindow=1
PageUnits=inches
LastForwardPb=Default


[Graphics]
Directory=
Type=



[Spelling]
AutoSuggest=1
MainDict=useng.md
UserDict0=user.ud
SpellOption=71


[CreditCard]
Custom 1=2:14:3:0:0:800-321-0288:
Local telephone carrier=2:4:3:0:0:800-321-0288:
AT&T (outside carrier)=1:20:2:4:3:10288:
AT&T (800 access)=1:14:2:14:3:1-800-321-0288:
MCI Vision (800 access)=1:4:2:4:3:1-800-950-1111:
MCI Vision (local access)=1:14:2:14:3: :
MCI Friends and Family=1:4:3:4:2:1-800-444-1616:
Sprint=1:14:2:4:3:1-800-321-0288:
Cam-Net=1:14:1:14:2: :
Unitel=1:13:3:12:2: :
British Telecom=1:4:2:0:0:144:
Mercury=1:4:3:2:0:131:
Custom 2=1:4:2:14:3: :


[Signature]
S1=APPROVED.TIF,Approved
S2=ARROWDWN.TIF,Down Arrow
S3=DRAFT.TIF,Draft
S4=FYI.TIF,For Your Information
S5=FRAGILE.TIF,Fragile
S6=HAPYFACE.TIF,Happy Face
S7=ARROWLFT.TIF,Left Arrow
S8=PLSEAT.TIF,Please Eat After Reading
S9=RSVP.TIF,R.S.V.P.
S10=ARROWRGT.TIF,Right Arrow
S11=SADFACE.TIF,Sad Face
S12=ARROWUP.TIF,Up Arrow
S13=CONFID.TIF,Confidential

[Prefix]
1=*70,
2=8,
3=9,


[PendingLog]
InfoSubjects=7,6,1,5,32766,32766,17,3,4,2,10,13,16,15
Heading1=0
Status=5,1
Heading2=1
Type=5,1
Heading3=2
Date=8,1
Heading4=3
Time=8,1
Heading5=4
Pages=5,1
Heading6=5
To=25,1
Heading7=6
Company=24,1
Heading8=7
Number=25,1
Heading9=8
Subject=32,1
Heading10=9
Keywords=20,0
Heading11=10
Billing=20,0
Heading12=11
Resolution=10,0
Heading13=12
Retries=10,0
XSplit=0
YSplit=47
XStart=0
YStart=0
XWidth=632
YWidth=363
WndStyle=0
OpenFolder=-1
OpenOnStartup=1
SortID1=2
SortOrder1=1
ShowToolBar=0
ViewOption=2213
ViewResolution=4

[Log]
InfoSubjects=7,6,1,5,32766,17,3,8,4,2,14,9,11,12,32766,16,15,32766,10,13,32766,32766,18
OpenFolder=2
Heading1=0
Status=5,1
Heading2=1
Type=5,1
Heading3=2
Date=8,1
Heading4=3
Time=8,1
Heading5=4
Pages=5,1
Heading6=5
To/From=32,1
Heading7=6
Company=26,1
Heading8=7
Subject=29,1
Heading9=8
Number=20,1
Heading10=9
Keywords=20,0
Heading11=10
Billing=20,0
Heading12=11
Speed=10,0
Heading13=12
Pages Sent/Recv=10,0
Heading14=13
Retries=10,0
Heading15=14
Duration=10,0
Heading16=15
Resolution=10,0
Heading17=16
Remote CSID=20,0
Heading18=17
Status Code=30,0
Heading19=18
ECM=10,0
XSplit=19
YSplit=47
XStart=0
YStart=0
XWidth=632
YWidth=363
WndStyle=0
OpenOnStartup=1
SortID1=1
SortOrder1=1
ShowToolBar=0
ViewOption=2213
ViewResolution=4

[Attachments]
InfoSubjects=0,1,4,3,5,2
ListWidth=126
LastCleanup=7320
Heading1=0
Description=30,1
Heading2=1
File Name=31,1
Heading3=2
Pages=6,1
Heading4=3
Type=8,1
Heading5=4
Keywords=18,1
Heading6=5
Date=8,1
XSplit=21
YSplit=47
XStart=0
YStart=0
XWidth=632
YWidth=363
WndStyle=0
OpenOnStartup=0
OpenFolder=1
SortID1=-1
SortOrder1=1
ShowToolBar=0
ViewOption=2213

[CoverDialog]
Heading1=0
Description=29,1
Heading2=1
File Name=40,1
OpenFolder=3
SortID1=-1
SortOrder1=1

[OCRXIS]
Reject=~
Language=1
Manual=0
ManualAllPages=0
AfterOCR=0
FileFormat=103
ClipFormat=0
FileActive=0
AppActive=0
OutFileName=
RunProgram=
OnRXAction=0
OnRXPath=
OnRXFormat=103

[WinFax Mail Programs]
MAPI=DCMSMPI.DLL
CC20=DCMCC20.DLL

[Registration]
Addr1=3104 East Camelback Road
Addr2=Suite 616
City=Phoenix
State=AZ
Country=USA
ZipCode=85016

[CoverPages]
ListWidth=137

[Fax Broadcast]
DataInitString=AT&F&C1&D2S7=55\
HdwFlowControl=1
BaudRate=2400

[Viewer]
GridActive=0
GridVisible=0
PosX=0000000000
PosY=0000000000
Width=0000000640
Height=0000000480
Show Graphics=Yes
Show Margins=Yes
FastGraphics=Yes
Mode=0000000104
Directory=
Preview Graphic=Yes
Export Directory=
Export Type=
Export Merge=Yes
OpenFileType=0000000000

[Phonebook]
ListWidth=123
EditTitleFieldList=2,21,1,3,18,1,13,12,1,12,10,1,14,12,1,15,20,1,1,5,0,4,20,0,5,20,0,6,10,0,7,10,0,8,8,0,9,13,0,10,13,0,11,20,0,17,9,0,22,10,0,23,10,0,24,10,0
InfoSubjects=2,3,13,12,14,4,5,6,7,8,15,22,23,24,9,11,10,18,19,17
InfoSubjects2=50,51,52
XSplit=28
YSplit=47
OpenOnStartup=0
XStart=0
YStart=0
XWidth=632
YWidth=363
WndStyle=0

[AttachDialog]
OpenFolder=0
SortID1=-1
SortOrder1=1
Heading1=0
Description=30,1
Heading2=1
File Name=30,1
Heading3=2
Keywords=30,0
Heading4=3
Pages=10,0
Heading5=4
Type=10,0

[Tools]
ButtonCount=12
1:SENDFAX=
2:PENDLOG=
3:SENDLOG=
4:RXLOG=
5:ATTACHM=
6:PAGE=
7:PHNBKLST=
8:ATCHADD=
9:ATCHDEL=
10:ATCHMOD=
11:ATCHVIEW=
12:FILEEXIT=

 
****************************************
System Tests  [Apr 24 1994 -- 17:59]
****************************************
486 processor or higher detected
Math co-processor present
386 Enhanced Mode
Windows Version 3.10 or higher
DOS Version 20.11
Physical Memory: 28,288 kb  (reported by CMOS)
Windows Memory Information:
    Free memory: 4,194,300 kb
    Total memory: 28,276 kb
    Swap file size: 4,194,300 kb
    USER Resources free: 85%
    GDI  Resources free: 77%
Network type:   NetBIOS
Verifying Network type: Not Installed
TEMP environment variable set to TEMP = (not set)
Environment Settings:
    COMSPEC=C:\OS2\MDOS\COMMAND.COM
    BLASTER=A240 I5 D1 T4
    SOUND=C:\SBPRO
    PROMPT=$p$g
    PATH=C:\OS2;C:\OS2\MDOS;D:\OS2\MDOS\WINOS2;C:\;D:\ODAPI;F:\WINWORKS\EXEC
    TMP=C:\
    windir=D:\OS2\MDOS\WINOS2
Active Tasks:
    D:\OS2\MDOS\WINOS2\PROGMAN.EXE
    D:\OS2\MDOS\WINOS2\WINSHELD.EXE
    D:\WINFAX\DELTEST.EXE
Drive Information:
    A:  Floppy Disk
    B:  Floppy Disk
    C:  Hard Disk  (6,196 kb free)
    D:  Hard Disk  (58,248 kb free)
    E:  Hard Disk  (8,696 kb free)
    F:  Hard Disk  (70,036 kb free)
    G:  Removable Disk  (116,938 kb free)
    H:  CD-ROM

****************************************
Test Summary:
****************************************
Fax/modem on COM1 is Class 1
A Class 1 modem supports the following WinFax PRO functions:
Sending and receiving faxes, Fax-a-File, Delrina Fax Broadcast
 
Fax/modem on COM2 is Class 1
 
System:     486 processor or higher detected
Windows:    Version 3.10 or higher, 386 Enhanced Mode
Resources:  USER  85%      GDI  77%