AdMaker 3.5 (Un-Registered Shareware Version) LICENSE INFORMATION This is the unregistered version of AdMaker 3.5. AdMaker is a shareware program. You may try this copy of the program for a period not to exceed 30 days to determine whether or not it is suitable for your needs. After that time, if you continue to use the program, you must register your copy with the author. To register, use the OsoSoft Program Info command in the Help Menu to print the registration form. The Registration fee for this program is $30. You can also register with a Visa or MasterCard by calling OsoSoft at (805) 528-1759 during normal West Coast business hours. Credit card orders incur a $4 shipping and handling fee for each order, regardless of how many programs are ordered. OsoSoft programs may also be registered on CompuServe in the SWREG forum. Registrations will be charged to your CompuServe account. Registered users receive the very latest version of the program, a printed manual, additional clip art images, automatic notification of major upgrades, and support. In addition, when you register, you'll always be entitled to upgrade to new registered versions at no charge on the OsoSoft BBS at (805) 528-3753. Registered users are entitled to unlimited free support by telephone, fax, on the OsoSoft BBS, and on Compuserve. Unregistered users receive only a minimum of support, limited to some installation help, if necessary, and are not entitled to telephone support. If you call the OsoSoft voice number for support as an unregistered user, you will be asked to register at that time by credit card. Users of this program, along with traditional shareware distributors may distribute copies of the shareware versions of this program, but only under the terms described in the VENDOR.DOC file included with this copy of the program. All commercial distributors MUST read that file and abide by the distribution rules contained in that file. Violations of the distribution license in VENDOR.DOC may result in prosecution under appropriate copyright laws of the United States and other countries. AdMaker and all related files, including this documentation are Copyright 1991,1994 by OsoSoft. All rights are reserved. OsoSoft is a member of the Association of Shareware Professionals and the Software Publishers' Association. OsoSoft 1472 Sixth Street Los Osos, CA 93402 OsoSoft BBS: (805) 528-3753 Voice Order Line: (805) 528-1759 CompuServe ID: 71571,222 HOURS OsoSoft business hours are 7 AM to 4 PM, Pacific Time, on weekdays. Calls outside those hours are not appreciated. ASP OMBUDSMAN NOTICE This program is produced by a member of the Association of Shareware Professionals (ASP). ASP wants to make sure that the shareware principle works for you. If you are unable to resolve a shareware-related problem with an ASP member by contacting that member directly, ASP may be able to help. The ASP Ombudsman can help you resolve a dispute or problem with an ASP member, but does not provide technical support for members' products. Please write to the ASP Ombudsman at 545 Grover Road, Muskegon, MI 49422-9427 USA FAX 619-788-2765 or send a CompuServe message via CompuServe mail to ASP Ombudsman 70007,3536. EDITING AND DISPLAY WINDOWS You'll see two windows on the screen. At the top is the text-editing window. Here, you'll enter and edit all the text to be included on your ad. Just below it is another window, where a WYSIWYG display of your ad appears. Editing Text in Admaker Admaker''s text box works much like your Windows word processing program. You can simply type your text in the box, pressing to move to a new line. To position the cursor in your text, use the cursor keys or click the mouse pointer where you want to type. If you select text by dragging with the mouse, new text you type replaces the selected text. The WYSIWYG display updates when you press or perform any formatting command. When you're entering text, all attributes continue from line to line when you press the key. When you delete lines, remaining text maintains its formatting. You are limited to 120 lines of text in Admaker. NOTE: It's very important to remember that Admaker depends on line numbers for its formatting. Before performing any formatting operation, select the line of text you want to format, by positioning the cursor in the text window. COMMAND REFERENCE LEFT SIDE COMMAND BUTTONS The Text Group [Edit]--This button returns the cursor to the text editing box. [Click to Move Text]--This command is new to version 3.5, and lets you move text instantly to any position. To use this check box, position your cursor on the line of text you want to move. Then click this command. Now, click on the WYSIWYG display where you want the upper left corner of the text to appear. [TextColor]--Admaker 3.5 can print text in color on color printers. To choose a color, first place your text box cursor on the line you want to change. Then click a color bar. NOTE: On most non-color printers colored text will print as a shade of gray. The Layout Group [Update]--This button updates the WYSIWYG display. [Clear]--This button clears your current ad from the screen and from memory. [Grid]--This button overlays a grid on the WYSIWYG display, to help you position text and graphics. The grid has divisions of .1-inch, with full inch lines in bold. Click the button again to remove the grid. [Zoom]--This button shows larger layouts at full size. While you can't edit in this mode, it's a good way to see an enlarged view of your ad. Use the scroll bars to view the entire layout. Click the button again to return to the reduced size editing view. [Scale]--Displays the current zoom percentage. For smaller ads, this will be 100%. RIGHT SIDE COMMANDS Text Attributes (Whole Line) [Line]--Displays the current line number, as determined by the position of your cursor in the text editing box. [Dupe Previous]--This button allows you to repeat the formatting of the line above the current line. This is useful whenever you want duplicate formats on several lines. Just format any line, then move to the next line and click this button. All line attributes will be duplicated. When typing, pressing automatically copies the previous line's formatting. [Font]--This drop-down list box displays the current font, and allows you to change a line to another font. Click on the arrow to drop down the font selection list. [Size]--Displays the current size for the font used on the current line. Click the arrow to drop down a list of available font sizes for the line. Sizes range from 4 to 72 points, in one-point intervals for the smaller fonts. HINT: Changing the font size of a blank line affects line spacing. Use this trick to adjust line spacing in 1-point intervals. [Align]--This control affects the alignment of the selected line. To change, click the arrow, then select your option. HINT: When using customized line positions, apply these to lines at the bottom of the ad's text to avoid later misalignments in normal lines. NOTE: For split lines, insert a tilde (~) in the text box where you want the line to split. Admaker will automatically separate the two halves of the line. You cannot insert internal formatting codes in split lines. Lines are split with the left half aligned with the left margin and the right half aligned with the right margin. [Style]--Four check boxes control text attributes for the entire line. You can select more than one style for any line. Clicking [Normal] removes all other style settings. [Rotate]--Admaker lets you rotate text up to 90 degrees in either direction. Start by selected the line to rotate, as you normally do, then click this button. Use the scroll bars in the dialog box that appears to set a rotation angle, then click [Accept] to apply the rotation. You can also click [No Change] to keep the current rotation or [Default] to return to normal alignment. The Clip Art Group [AddArt]--Opens a dialog box for loading .BMP or .PCX clip art images. Admaker supports black and white or color images up to 256 colors. To see a preview of an image, click once on the filename. To load the image, double-click the file or click OK. Admaker will automatically select either the first unused clip art image, and position it in the WYSIWYG display. [HideArt]--This button temporarily removes all clip art and line drawing art from the WYSIWYG display. Since Admaker can overlay text on a graphic or line art object, use this command to help you see text position if it is hidden by a clip art image. When clip art is hidden, a dotted box shows its location for alignment purposes. Clicking it again will redisplay your graphics. [Delete]--Removes the currently-selected clip art image. [Option Buttons]--Selects one of the four clip art images. You may select by clicking the button, or by double-clicking on the image itself. You must select an image before acting on it. Options are 1, 2, 3, or 4. Normally, PIC 1 is at the left top corner of the ad, PIC 2 at the right top corner of the ad. 3 and 4 are in the two bottom corners. When selected, a thin border will appear around the image. [Scale]--Use this control to resize a selected clip art image. Remember, the command only affects the image selected with the option buttons. For small changes, click the arrows. Click between the arrows for larger changes. The image always stays in proportion. HINT: Avoid major changes in clip art image size, to avoid image degradation. If you need to enlarge or reduce an image very much, do so in a paint program like Windows Paintbrush before loading it into Admaker. This will result in an improved appearance on your ad, since paint programs have sophisticated scaling routines. Moving a Clip Art Image You can move a clip art image by dragging it around the screen with the mouse. To do this, first select the image you want to move by clicking the appropriate option button in the Clip Art Group, or by double-clicking on the image itself. When the image is selected, a thin border appears around the image. With the image selected, click the left mouse button in the WYSIWYG display somewhere outside of the image. The image will instantly move, with its upper, left corner at the position where you clicked. Then, with the mouse button held down, you can drag the image to a new location. The new location is stored with the ad when you save. If you try to drag the image by first clicking on the image, a message will appear telling you to click outside the image. The Line Drawing Group [Object]--This drop-down list box allows you to select an individual object for editing. If you do line drawings, each line, box, or circle gets an object number, which appears near the object. Select the object you want to modify in this list box. [Width]--This box controls the width of line drawing elements. Widths range from 1 to 24 pixels on the screen, which translates roughly to point measurements on the printer. If you change the current setting, it will affect the current object, if present, or the next object you draw. [Draw]--This check box enables line drawing. Click it before creating an object. Admaker will automatically select the first available object number. [Filled]--This check box appears only when you've drawn or selected a box or circle. If you check it, the box or circle will be filled with the same color used to draw the box. Uncheck it to remove the fill. NOTE: Some printers always draw a solid black box around the object. TIP: Admaker can print text inside filled boxes. Use this technique to create boxes filled with one color, then use a contrasting color for the text. Use this technique too to produce reversed, white on black text. Just draw a filled box around your text, then change the text color to white. On black and white printers, you'll have to experiment to get just the right effect. [Line], [Box], [Circle]--These options determine the type of object you want to draw. [LineColor]--This set of color bars lets you set the line and fill color for either a new object or for an existing object picked from the object list. Select the object, then apply a color. The same color is used for both the lines and fill. DRAWING AN OBJECT To draw an object in the WYSIWYG screen, first select the type of object ([Line] [Box] [Circle]), then set the width for the lines used to draw the object, and the color for that object. Next click on the [Draw] checkbox. Move the mouse pointer inside the WYSIWYG display. While holding the left button down, drag the mouse pointer to a new location. A rubber-band image of your object will appear as you draw. Draw slowly for best results. When the object is approximately the right size, release the left mouse button to place your object on the screen. A number will appear next to the object to identify it. NOTE: Admaker does not check to make sure your object is within the boundaries of the ad. That's your responsibility. TIP: Admaker automatically converts all lines drawn at small angles to either horizontal or vertical straight lines. [Move], [Size] Options--These two options determine whether the scroll bars (see below) move or size the current object. [Scroll Bars]--Horizontal and vertical scroll bars control positioning of graphical elements. Depending on which of the option buttons above is selected, you can move or scale all graphical objects in .005 inch increments. MOVING AN OBJECT Start by selecting the object in the [Object] list box. Next, click on the [Move] option button. To move the object in .005" increments, click on the [Up], [Down], [Left], or [Right] arrows on the appropriate scroll bar. To move the object in .05" increments, click the scroll bar regions between the arrows and the position button on the scroll bar. SCALING A LINE DRAWING OBJECT First, select the object you want to resize, then click the [Size] option button. Then use the scroll bars as described above to alter the size of the object. Erasing and Restoring Line Drawing Objects [Erase Selected]--This button erases the current image, as identified in the [Object] list box. This erasure is permanent. [Erase All]--This button removes all graphical elements from the screen. MENU COMMANDS FILE MENU New Layout File--Clears the current ad and sets up for a new design. Open Layout File--Opens an existing .LAY ad design file. Save Current Layout--Saves the current ad with the current filename. The current file will be overwritten without warning. If you're making a different ad, use the Save As... command. Save Current Layout As...--Lets you save the current design under a different filename. Insert Graphic File--Lets you select a clip art image for insertion in your design. Admaker supports up to four clip art images on each ad. Same as [AddArt]. Print 100% Size Layout--This command prints your layout at full size, with optional crop marks and message text. Print 200% Size Layout--this command prints a 200% enlargement of your layout. NOTE: If the ad is too large to print at 200%, this command will be grayed out an unavailable. Again, crop marks are optional. Use this command whenever possible to allow the publisher to reduce the ad, which will give it better resolution when printed. The actual size of the ad is always printed on the page for reference. Print Color Sample--Every printer handles color differently. Use this command to print samples of text in all the colors shown on the color bar chart. For black and white printers, this will produce shades of gray in most cases. NOTE: If some of the colors print as black on color printers, change the Dithering setting in your Printer Driver, using the Printer Setup command. Printer Setup--Use this command to alter printer settings or to change printers. You'll see the normal Windows Printer Setup dialog box for your printer. When you return to the program, you'll be asked if you want to update your font list. Update Font List--Admaker handles fonts very well, but there may be times when you need to relist your currently available fonts. This command does that. Exit--Quits Admaker, with a confirmation box. Click [Yes] to save the current ad and exit. Click [No] to exit without saving. Click [Cancel] to return to Admaker. EDIT MENU Cut--Removes selected text from the editing box, then stores it in the clipboard. Copy--Sends a copy of selected text to the clipboard. Paste--Copies text from the Windows clipboard to the current cursor location. Insert Special Character--This new command pops up a grid showing all the special, foreign, and symbolic characters available in the currently selected font. Hold down the left mouse button over a character to see an enlarged view. Double-click on a character to add it to the box at the top of the screen. When you click the Insert command, all characters in the box will be inserted at the current cursor location. Edit Layout Text--This command lets you edit the advertising text used on camera-ready layouts. Edit Current Picture--Starts Windows PaintBrush and loads the picture selected with the option buttons for editing. When you exit PaintBrush, you'll return to Admaker. To use the altered image, delete the current image, then use [AddArt] to reload the image from disk. LAYOUT MENU Design Ad Template--Lets you create a new ad template, specifying horizontal and vertical dimensions. Measurement System: Normally, you'll enter dimensions in inches (1.5, 2.33, etc.), but you can use any system of measurement by adding an abbreviation after the measurement. This is true any time Admaker asks for measurements. The abbreviations are, mm for millimeters, cm for centimeters, pt for points and pi for picas. abbreviations can be in upper or lower case, but must follow the number, with or without a space. Valid Examples: 2mm, .21 cm, 2PT, .5 PI. Save Current Ad Template--This command lets you save a template with the measurements of the current layout. Use this command create dimensional templates for all the ad sizes you normally use. Only the dimensions are stored, so you can use the command even on ads where you've already entered text. Open Ad Template--Use this command to retrieve previously-saved dimensional templates you create. Rotate Current Line--Like the [Rotate] button, this command displays the text rotation dialog box for the current line. Show Grid--Like the [Grid] button, this overlays a grid on your WYSIWYG display. The grid disappears when you give the command again. Margins--Sets left or top margins separately for text. Choose the appropriate subcommand. Small changes have big effects, so start with small margin measurements. The default is .1 inch. You may use any measurement system, as described earlier. NOTE: Margins affect only text, and can be overridden by either the Click to Position Text or Custom Alignment options. Use this command to set margins for the starting position of most text on the layout. Left Align All Lines--Sets all lines on a ad to the left margin. You can override this setting or any of the other All Lines settings, by using the Align list box. Center All Lines--Centers all lines on the ad. Right Align All Lines--Sets alignment for all lines to the right margin. Insert Formatting Codes--The commands in this submenu insert special codes in your document which allow you to alter the appearance of just part of a line. Whenever possible, use the whole line formatting tools instead. Normal--Inserts in the line. This code returns the line to normal text. Bold--Inserts in the line, boldfacing the following text. Ital--Inserts in the line, italicizing the following text. Underline--Inserts in the line, underlining the following text. Superscript--Inserts in the line, superscripting the following text. Subscript--Inserts in the line, subscripting the following text. NOTE: You cannot use inserted codes in Rotated Text or in lines which have their alignment set to Centered, Right-Aligned, or Split at Tilde. This would cause misalignments. OPTIONS MENU Make Current Font Name Default--This command sets the current font, as highlighted in the font menu, as the default for all blank lines in your ad. It's best to use this command before entering any text. Make Current Font Size Default--As above, but sets the current font size as the default for blank lines in your ad. Save Default Settings--Stores the Font, and Font Size settings made earlier in a file which is loaded each time Admaker runs. Use this command if you want to save these settings for use in most layouts. Delete Default Settings--Deletes the default settings file. Use this command if you want to make a permanent change in your default Font, and Font Size settings. HELP MENU Help with AdMaker --This command opens a new window. On the left is an index of topics. To get help on a topic, just click on the topic's name. You can scroll through the list or type the first letter of your topic. Once the program finds the topic, the index name will appear at the top of the screen to the right, with the help information below. In some cases, a topic will have more than one entry. About--Displays information about Admaker, including the current version number and support information. OsoSoft Program Information--OsoSoft offers several other programs which may interest you. This command displays a window that lets you learn about these other programs and lets you order OsoSoft products. To view information on a program, click the [Info] button next to that program's name. To order, enter the quantity desired for each product. Then fill out your name and address information and mark the appropriate disk size box with an X. Click the [Print] button to print the form or the [Cancel] button to return to Admaker. NOTE: You can always order OsoSoft products with your Visa or MasterCard as well. Just call (805) 528-1759 to order. EDITING YOUR DESIGNS Editing Text The easiest way to replace existing text with new text is to highlight existing text by dragging over it with the mouse, one line at a time. Once the text is highlighted, just type your new text, which will automatically replace the highlighted text. Controlling Line Spacing To make fine changes in the spacing between lines of text, make sure there's at least one blank line between the lines you want to change. Then, position the cursor on a blank line and change the font size for that line. When you update the display, you'll see the changes on your screen. You can make changes in 1-point (1/72") intervals. Placing Text Beside Clip Art You'll often want to position text next to or around clip art images. To do this, use the [Alignment] options or the Click to Position Text check box.. For example, to position text to the right of an image, choose the Right Aligned alignment option, then add spaces after the text to move it to the position you want. Similarly, use the Left Aligned option to position text to the left of an image. This time, however, place your spaces to the left of the text. To wrap text on both sides of an image, insert a tilde (~) where you want the text to break, then choose the Split at Tilde alignment option. Once again, pad the text with spaces to achieve the position you need. Don't forget the Custom Alignment and Click to Move Text options for even more precise positioning of lines. Overlaying Graphics with Text You can print text on top of clip art graphics, but you cannot view this text on the screen. To see text which will overlay a clip art image, click the [HideArt] button. A dotted box will appear to show where the graphic is located. You can then use the Click to Move Text option to pop text into position. Use overlaid text with caution, since it may obscure part of a clip art image. TIP: You can create excellent effects by adding a clip art image which has a box in it for text, such as the FRAME series of images included with this program. Then, add text to the image to customize the frame to suit your purposes. Working with Split Lines Admaker's ability to split lines is very powerful, letting you position blocks of text on both sides of the ad. Normally, the left half of the line is flush with the left margin, while the right half is right-aligned. Often, however, you'll want to center blocks of text or manipulate the alignment in other ways. As described above, use spaces to pad the text until it's aligned just the way you want. Creating Columns in Admaker It's easy to create columns for text. To do this, select a custom alignment or use the Click to Move Text command for the first line in the column, positioning it exactly where you want it to appear on your ad. Then, either enter new text on subsequent lines or click the [Dupe Prev] button on subsequent lines. All lines will line up with the first line. TIP: When creating columns of text, it's best to place this text at the bottom of the text in the text window. This helps prevent misalignments of other text. Working With Rotated Text If you want to use rotated text on a ad, it's best to add the text to the bottom of the text box text. This helps prevent misalignments of other text on the ad. Before typing the text to be rotated, click the Click to Move Text check box, then click in the WYSIWYG window where you want the top left of the text to appear. Then type the text and click [Update]. Creating Reverses (white on black) and Other Text Effects Draw a filled box, using black or another color for the box. Then, set the text you want to place in the box to white or a contrasting color. Use the Click to Move Text command to position the text inside the filled box. Since colored text and fills print as shades of gray on most printers, you can achieve various effects by mixing fill and text colors. Print samples to see the actual results. You can also draw a filled box around existing text for the same effect. Just remember to set the text color to contrast with your filled area. Creating Borders It's easy to use the line drawing tools to create borders for your layout. Try using the Grid button to display the alignment grid on your layout for better accuracy. Experiment with multiple borders, each having a different line thickness. Background Shading By drawing a large, filled box, almost the size of the entire ad, using a light gray color for the fill, you can add a distinctive background to your layout. Use this technique with caution though, and don't use small type on these layouts, since it tends to disappear. Printing Samples When working with complex ad designs, it's a good idea to print frequent samples of your design for checking. After printing a sample, you can make changes to correct slight misalignments. Printing Final Output When printing actual camera-ready layouts, use paper specially designed for camera-ready output or high-quality, bright white paper. Set your printer's density setting to whatever level is needed to produce 100% black. Make sure your printer is clean internally and has a good toner cartridge or ink cartridge. Be sure to include the crop marks in final copy, since the publisher will need those marks for precise positioning. Spot Color If you need to add spot color to an ad, create two ads, one with just the black material and one with the color material. Do not take an ad printed in color to your publisher...they can't use it. Instead, lay out as many separate images as you need, one for each color used in the ad, but print each ad in pure black. AdMaker is more than accurate enough in its printouts for good registration at the print shop. HINT: To get all those colors lined up properly, include all elements on one master ad, then reset the color of items not needed in a particular printout to white. Print one color's version, then change other elements from white to black or the opposite. Be sure and save separate files for each color. Just remember, your publisher or printer needs one black printout for each color used in the final Ad. TIP: If you have a color printer, use it to produce a master printout to take to the publisher or print shop as a guide to the way the final ad should look. Admaker TIPS Printing Printing takes time. Admaker and Windows have to compose graphical pages before a page emerges. For maximum quality when printing Admaker ad designs, be sure your laser printer has a good toner cartridge. If you can set print density, choose a medium or dense setting to achieve dark blacks for reproduction. Admaker can handle color clip art images, but the final output will depend on how your printer interprets the colors in your clip art. HINT: If some colors print as black on a color printer, change that printer's dithering settings in the Printer Setup dialog box. You may have to click Options in the dialog box to get to these settings. Notes for HP DeskJet Users Try setting the paper size to Legal if your printer ejects pages and doesn't print the crop marks on large layouts DeskJet color printers may print some of the colors as black if Dithering is set to Standard. To fix this, set the printer for any other Dithering type in the Options section of the Printer Setup dialog box. REMEMBER: Load paper face down in your DeskJet's paper tray! Working With Clip Art Images Admaker accepts both .BMP and .PCX graphics files. Graphics programs, such as Windows Paintbrush, supplied with Windows 3.x, can create these files. You can convert other file types, using any of a number of format conversion programs, such as HIJAAK, Publisher's PaintBrush, and others. The size of your image is important. Art for small ads is quite small, almost never exceeding 1" in any dimension. While Admaker can handle much larger images, it's usually better to scale large images in a program specifically designed to do that. Windows Paintbrush can handle preliminary scaling quite well. If you have a scanner, you can create your own clip art in minutes. Simply scan the image, then use your scanner software to produce a .BMP or .PCX file approximately 300 pixels in each dimension. You can also create clip art images with any paint program that can produce .BMP or .PCX files. Creating custom logos isn't difficult at all. Also, a number of clip art libraries are available, both commercially and as shareware. Often, however, these images may need conversion to a supported format or scaling. You'll also find interesting clip art files on the OsoSoft BBS. Clip Art Tips Very thin lines often don't print well. Large black areas may present problems for your laser printer, and sometimes don't reproduce as completely black. Reducing a large image to ad logo size often results in loss of detail. Increasing the size of tiny images usually results in jagged lines on your printout. Lines, Boxes, and Circles You cannot draw a graphical element that extends into a clip art image. The line will end at the edge of the image. You can, however, overwrite text with a line graphic. Let the WYSIWYG display be your guide. Be careful not to let lines, boxes, or circles extend past the ad's borders. Use the [Update] button to see the results of your changes. As you draw and move lines, text may not appear if it has been overwritten. Update to see the actual image. Use the [Draw White] option to create special effects. Combining thick lines with intersecting white lines can create interesting effects. You can create quite complex drawings using the line drawing tools alone, including simple logos. You can also draw boxes or circles, with fills, around existing text on your design. It's best to first create the text, then follow up with lines, boxes, and circles. Use the positioning scroll bars for precise sizing and placement. Try using a filled box or circle to set off text. Use a light color with black or dark colored text or a dark color combined with white text for special effects. Overlaying white text on a black filled box is the best way to create reversed text. TROUBLESHOOTING Setup Doesn't Work--You may have older versions of some of the files needed by Admaker installed in incorrect directories. Load README.WRI into Windows Write and use the manual installation procedures described there. Reversed Printing and Shaded Text Don't Print Correctly--Change your printer settings with the Printer Setup command to enable the Print True Type Fonts as Graphics check box. Clip Art Images Don't Print--Exit Admaker, then run Windows Setup from the icon in Program Manager. Change to a graphics driver which displays 256 colors or less. Some high-color display drivers are incompatible with Admaker's graphics printing methods. Small TrueType Fonts Appear Incorrectly in the WYSIWYG Display--Due to the way Windows handles TrueType fonts smaller than 8.75 points, your WYSIWYG display may not display these fonts correctly in small sizes. They will print correctly, however. If you have Adobe Type Manager, try a PostScript Type 1 font instead. Some Colors Print as Black on My DeskJet Printer--To print all the possible colors, you need to reset the Dithering Setting in Printer Setup. Rotated Text Messes Up My Layout--To prevent this, enter text to be rotated at the bottom of the text in the text editing window, then position it with the Custom Alignment or Click to Move Text options, then rotate it. Alignment of text below the rotated text is affected by the rotated text. I Can't Figure Out What All the Buttons Do--To get Title Bar help on any button and on most other items on the screen, click on the item with the right mouse button. I Get an Error When I Print Layouts With Graphics--Your graphic files may be too large or you may not have enough free hard disk space for the TMP files created by Print Manager. Try scaling the graphics in another program or turn off Print Manager in the Printer section of the Control Panel. Also, your printer may not have enough memory to handle a full page of graphics.