                                 
                               Brainex Door System
                    
                                  General Help


                                 MOVING AROUND
                                 =============
  Use your mouse or arrow keys to move to the desired selection. 
  If you have selected DONE, then hit ENTER to exit and save. 
  
                                   MAIN MENU
                                   =========

  Configure Your BBS Node Settings
  --------------------------------
  Total Nodes:
  Enter the total number of nodes for BBS. Single node 
  systems enter 1. You can use PAGE UP and PAGE DOWN keys
  to view settings for other nodes.

  System Serial Number: 
  Enter your Brainex Door Manager Registration number. Brainex doors
  will work in DEMO mode if you have not registered the door manager.

  BBS Name:
  Enter the name of your BBS as you would like it to appear to callers.
  Upper/Lower case sensitive.

  BBS Type:
  Use the spacebar or mouse buttons to toggle supported BBS types.
  If your BBS is not listed, but uses DOOR.SYS as its door data file,
  select GENERIC.

  Sysop:
  Enter the sysop's name.

  BBS Version:
  Enter the version number of your BBS.

  Data File:
  Enter the name of your BBS door data file if different from the one
  automatically selected.

  Path to Data:
  The is the complete DRIVE\DIRECTORY\FILENAME for the door data file
  for the node listed.

  Comport:
  Toggle the comport for this node using mouse buttons or spacebar.

  Baud:
  Toggle the baud rate for this node using mouse buttons or spacebar.
  If you do not use a locked com port, select AUTO.

  Locked Port:
  Toggle the locked or unlocked baud for this node using mouse buttons or 
  spacebar. If you selected AUTO baud, then this setting should be NO LOCK.

  Base Address:
  If you wish to use a non-standard com port, type the com port base 
  address for this node.

  IRQ:
  Toggle the IRQ for this node using mouse buttons or spacebar.

  Node Number:
  Use spacebar or mouse buttons to toggle the node number. You may then 
  view or edit the information for the node.

  Install or Modify a Brainex Door
  --------------------------------
  Use the arrow keys or mouse to the desired door. Hit enter, then 
  answer the setup questions for the door.  Move to the DONE box when
  you are finished.

  
  Add or Edit External File Transfer Protocols
  --------------------------------------------
  Certain Brainex doors require the program DSZ.EXE, DSZ.COM, GSZ.EXE,
  HSLINK.EXE, or other external file transfer programs. Enter the
  DRIVE\DIRECTORY where the batch files for your external file
  transfer program are located. Usually this is your BRAINEX default
  directory.  Enter a letter for each protocol. This letter will
  be part of the options menu shown to the callers. Enter the protocol
  name, and the batch file name.  When finished, move to the DONE box,
  then hit enter.

  
  Add or Edit CDROM information
  -----------------------------
  For use with ROMBRAIN and REQUEST programs.
  
  If you want to use more than one CDROM disk, you will need to enter
  information for each disk.  Place the first disk into your CDROM
  drive.
  
  CDROM Drive:
  Enter the drive letter.  Enter 0 only if this CDROM disk 
  will not be available to callers. The disk volume label will appear 
  in the Volume/Label box. 
  
  Disk Title:
  Enter the name of the CDROM, this is what callers will see on the 
  Rombrain Main Menu.

  Path to RomBrain Filebase:
  Enter the DRIVE\DIRECTORY for the filebase base for this disk. This is
  the location of the CDTYPE files.  You can download them from the Brainex 
  BBS, or create them with the COMPILE program. Before you use COMPILE, 
  enter the information for each CDROM disk.

  Disk Volume/Label:
  Enter a volume label only if the disk is OFFLINE.
  
  Access Level to View Directory:
  Enter the user level that may view the directory of the disk.

  Access Level to Download Files:
  Enter the user level that may download files from this disk.

  CD Type Letter:
  Use mouse buttons or plus/minus (+ -) keys to toggle CDROM types.

  To add another CD, use mouse or arrow keys to move to the DISK NUMBER 
  box, then use mouse buttons or plus/minus (+ -) keys to select a disk.

  If any information is left blank, the CD information will NOT be saved.

  You may delete a CDROM disk record entry by selecting DELETE.

  Move to the DONE box, then hit ENTER when you are finished.

                     ------------------------------------

  Brainset Startup Command line options:

  SOUND OFF
  SOUND ON
  TITLE OFF
  TITLE ON
  COLOR OFF
  COLOR ON

  Example:
  BRAINEX COLOR OFF SOUND OFF

                      ------------------------------------
  
  Files created and/or used by Brainex:
  
  BRAINEX.INI
  Setup information is saved to the BRAINEX.INI file. This is a
  plain text file. All Brainex doors share this file. You may edit this 
  file with any ascii text editor if you wish. 

  BRAINEX.HLP
  This file

  BRAINEX.DAT
  Script file for door setup information.

  MONEY.DAT
  Callers money data for Brainex doors that use a money system.

  BRAINEX.KEY
  If this file is present, the musical title sequence will not be shown.
  Overide with TITLE ON command.

  REQUEST.DAT
  Offline file request information for RomBrain/Request doors.

  COMMENT
  Text file used to replace comments in ZIP files. 
  Used by File Brain, RomBrain, Request doors.
  
  LIST.COM
  Used to read this help file.

  Other files may be created by Brainex doors, and will be written to
  the Brainex default directory.


                                    [end of help]

