From:    John Musselwhite                       Area: Protocols
To:      Frank Jacobberger                      27 Apr 92 10:15:46
Subject: GSZ for Maximus 2.01 wb                

Hello Frank!
25 Apr 92, Frank Jacobberger writes to  All:
 FJ> Hello  All!
 FJ> I know of the protocol.ctl setup for DSZ.com in Maximus,
 FJ> but is there one for GSZ.EXE (graphical Z-modem by OMEN)?
    The setup is identical... Just make sure you change ALL references to GSZ 
including your batch file.
    I'm switching my system to PCZ myself as it's public domain... it works 
fine for BW as well...
        John...



--------------= Brought to you compliments of Plastic Tower  =---------------

From:    Thomas Schenk                          Area: Protocols
To:      Frank Jacobberger                      27 Apr 92 15:46:52
Subject: GSZ for Maximus 2.01 wb                

 FJ> I know of the protocol.ctl setup for DSZ.com in Maximus,
 FJ> but is there one for GSZ.EXE (graphical Z-modem by OMEN)?
 You might try this.
  
REN GSZ.EXE DSZ.COM
 After you rename it, use the setup info for DSZ.  
   
I did this when I was using Byte Brother's PowerNode.  This is a transfer 
protocol shell that supports DSZ.COM, but not GSZ.EXE.  Since Dos doesn't 
care what you name the program, this might work.  It has worked like a charm 
for me.  Later.
 Thomas


--------------= Brought to you compliments of Plastic Tower  =---------------

From:    Ryan Potts                             Area: Protocols
To:      Phill Mckenna                          25 Apr 92 15:48:00
Subject: hyperprotocol                          

 PM>          DownloadCmd     COMMAND.COM /C HYPE HYPE%K.LOG %P %b SEND
                                             ^^^^
What does this Batch file look like?
Ryan Potts



--------------= Brought to you compliments of Plastic Tower  =---------------

From:    Jon Wittlin                            Area: Protocols
To:      Frank Jacobberger                      27 Apr 92 06:03:46
Subject: Re: GSZ for Maximus 2.01 wb            

Frank Jacobberger had the nerve to say this to  All on 25 Apr 92  18:07:18
 FJ> Hello  All!
 FJ> I know of the protocol.ctl setup for DSZ.com in Maximus,
 FJ> but is there one for GSZ.EXE (graphical Z-modem by OMEN)?
Same EXACT Setup....
Jon
... Engineers do it with Super Position!

--------------= Brought to you compliments of Plastic Tower  =---------------