-------------------------------------------------------
UNICOM 3.1A1

NOTE: 

THIS IS A RE-RELEASE OF UNICOM 3.1A THAT CORRECTS
PROBLEMS IN THE INITIAL RELEASE OF 3.1a DUE TO A
BAD SOFTWARE BUILD.
-------------------------------------------------------
This is the shareware version of Unicom 3.1a.

If you obtained Unicom 3.1a from a BBS or
electronic service, you need both
UC31A-1.zip and UC31A-2.zip.

(On CompuServe the files are named:
 UC31A1.ZIP and UC31A2.ZIP)

Unzip both these files into the same
directory then proceed with the installation
below starting with step 2.

-------------------------------------------------------

This shareware originated from:

Data Graphics
P.O. Box 58517
Renton, WA 98058
U.S.A.

(206)432-1201 voice 
(206)432-8673 fax   
(206)432-6456 bbs

-------------------------------------------------------

Installing Unicom 3.1a

All the files on this distribution are
compressed (except the install program)
and are denoted with an underscore in the
file extension.

You must use the provided INSTALL.EXE
program to install this distribution
on your computer for both 1st time
and upgrade installations.

To Install Unicom 3.1a:

1) Insert the distribution disk 
   into the appropriate drive.

2) Activate INSTALL.EXE on the install
   drive using the Windows File Manager.

3) You will be prompted for a
   source and destination file path.
   Enter the desired paths into
   the edit fields.

4) Sit back and relax.

If you encounter difficulty, please
contact tech support at (206)432-1201.

Thank you and enjoy.