WinCIS Version .94 Beta
             1992 Copyright(C)
            All Rights Reserved
               Logix Systems
            16038 Augusta Drive
           Chino Hills, Ca 91709

WinCIS is a Shareware Product

       Currently there is no charge for the use of BETA Version .94
       You may freely copy and distribute it to others as long as you
       do not modify the program in any way.


Before Downloading WinCIS Version .94 BETA from CompuServe

        The files for downloading WinCIS are large so please be
        aware that this is a BETA version of the product.

        As such we have tested the product but CANNOT GAURANTEE
        that it can run under every possible enviroment.  The purpose
        of beta testing is to ensure a software product will run
        under the largest possible hardware, software, and operating
        system environment combinations.


Installing WinCIS

        What you Should Know to Use WinCIS

        Before installing and using WinCIS, you should have a basic
        knowledge of your computer and the Windows environment.  In
        particular, you should be familiar with the use of menus,
        windows, and dialog boxes and other controls typically used
        in the Windows environment.

        You should be able to select items by highlighting them with
        the arrow keys, or clicking on them with the mouse.  You must
        also have an understanding of the operation of your modem.

        For more information about the Windows operating system, refer
        to your Microsoft Windows User Guide.  For more information about
        your modem, refer to the manual that came with your modem.


WinCIS Prerequisites

        WinCIS requires the following minimum hardware and software
        environment to run acceptably:

        An IBM PC, PS/2 or 100% compatible computer.

        A 386/20 CPU chip.

        At least one floppy disk drive of 1.2MB 5.25" or a 720K 3.5"
        floppy and a hard disk.

        At least 2 megabytes or more of RAM.  The more RAM you have the
        better WinCIS will run.

        Approximately  1.5 megabytes of free space on your hard disk
        drive in order to install the complete WinCIS product.  If you
        already have some of the required DLL's the space will be
        correspondingly less.

        Microsoft Windows 3.0 or 3.1 running enhanced mode installed on
        your system.

        An Asynchronous modem from 1200 - 9600 Baud.

        WinCIS may run on configurations that do not meet these minimum
        requirements, however, the performance may not be acceptable.


Downloading from CompuServe

        The following is a list of the files necessary for downloading
        from CompuServe:


        The naming convention used is WCnnnX where:

                WC  ....... indicates WinCIS
                nnn ....... indicates version
                X   ....... Sequence

        For example:

        WC092A.ZIP containing the installation notes for WinCIS
                   Version .94


        The files on CompuServe are as follows:

        WCnnnA.ZIP .... Installation Notes (this file)
                        and README.WRI Getting Started Manual

        WCnnnB.ZIP .... Main Program Files 1 of 2 (REQUIRED)
        WCnnnC.ZIP .... Main Program Files 2 of 2 (REQUIRED)


        VBRUN2.ZIP .... VBRUN200.DLL This is the visual basic runtine
                        library.  (REQUIRED)

                        This file is REQUIRED  and can be found in
                        several forums:

                                MSBASIC............. VB Files  VBRUN2.ZIP
                                WINADV.............. (Share/Free)  VBRUN2.ZIP

                        However Check your

                                \WINDOWS
                        or      \WINDOWS\SYSTEM

                        directories and see if this file (VBRUN200.DLL)
                        is present on your system.  If so then there
                        is no need to download this file.

                        This file is NOT INSTALLED by the installation
                        procedure.  Simply unpack this file into your
                        \WINDOWS\SYSTEM directory if you need it.


        If you download WinCIS from CompuServe you will need to unzip
        the files into a working directory, 1.2 or 1.44 diskette
        prior to running the installation.

        Then run INSTALL using the ProgMan FILE/RUN menu from the
        place that you unzipped the files.


For a QUICK tour of instructions for using WinCIS SEE the README.WRI
in WCnnnA.ZIP or See Getting Started after Installing WinCIS.

Regards,

Larry Lee 77670,1471