{                     USING AI-NDIS WITH BANYAN VINES
{                    =================================

   You can use AI-NDIS to run LANtastic and Banyan(R) VINES(TM) software
   simultaneously on one adapter.  The drivers needed to run Banyan over
   NDIS are NDISBAN.COM and NDISBAN.OVL.  NDISBAN.OVL is Banyan's renamed
   version of NETBIND.EXE.  Banyan VINES ships with PROTMAN.DOS V1.1 and
   NETBIND.EXE V1.1.  To use Banyan VINES with PROTMAN.DOS V2.0, load
   PROTMAN.DOS V2.0 in the CONFIG.SYS and copy NETBIND.COM V2.0 to
   NDISBAN.OVL in the Banyan subdirectory.

   Banyan software should always be loaded before the LANtastic software,
   and the Protocol Manager should be run in dynamic mode.  Below are
   sample CONFIG.SYS, AUTOEXEC.BAT and PROTOCOL.INI files running both
   LANtastic and Banyan software.

    CONFIG.SYS
    ----------

              DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
              DEVICE=C:\LANTASTI\AEXNDIS.DOS


    AUTOEXEC.BAT
    ------------

              C:\BANYAN\BAN
              C:\LANTASTI\AI-NDIS BIND_TO=AEXNDIS_NIF
              C:\LANTASTI\AILANBIO
              C:\LANTASTI\REDIR MachineName


    PROTOCOL.INI
    ------------

             [PROTMAN]
                 DRIVERNAME = PROTMAN$
                 DYNAMIC = YES

             [VINES_XIF]
                 DRIVERNAME = NDISBAN$
                 BINDINGS = "AEXNDIS_NIF"

             [AEXNDIS_NIF]
                DRIVERNAME=AEXNDS$
                IOBASE=0x300
                IRQ=15