LANtastic Network Operating System Version 5 Compatibility Bulletin Product Reviewed: Apex Graphics Systems Sketch Library v3.6 Classification: Vertical Market Applications Date: 07/13/1993 (APEX.DOC) Engineer: JHC page 1 of 3 COMPATIBILITY STATEMENT: Apex Graphics Systems, Sketch Library v3.6 has been tested as compatible with LANtastic version 5.0. PRODUCT OVERVIEW: The Sketch Library is a DOS based Graphical User Interface (GUI) designed for real estate appraisers and tax assessors. Network versions allow multiple users to edit, draw, print and save sketch files simultaneously. System requirements are as follows: * IBM compatible PC, XT with 640KB RAM or better. * Graphics capable video monitor and controller (Herc,CGA,EGA,VGA). * 525KB free conventional RAM before loading program. * 2.5MB free hard disk space. * HPII compatible laser jet, - IBM, or EPSON compatible dot matrix printers. * MS/PC-DOS 3.3 or higher. APEX will detect and use EMS memory automatically if it is available. EMS memory is NOT required for normal operation, however, it's availability will reduce conventional RAM requirements. INSTALLATION: The system on which APEX will be installed must be configured as a LANtastic server. Installation is accomplished from floppy disks. From the floppy prompt type: INSTALL /N After installation, manually set KERNEL.EXE to read only by typing while in the installation directory (e.g. C:\APEX): ATTRIB +R KERNEL.EXE CONFIGURATION: For multi-user use, be sure to load the DOS SHARE program on the server before starting the LANtastic network. Recommended SHARE parameters are: SHARE /F:4096 /L:200 The server may be either dedicated or function as a workstation. All workstations are identified by a unique three (3) character alpha-numeric variable set in the DOS environment table: SET APEX.USERID=____ This may be included in the workstation's AUTOEXEC.BAT file. OPERATION: Program operation begins by accessing the appropriate drive resource and executing APEX.EXE from the command line: Net Login \\ Net Use : \\\C-DRIVE\APEX APEX MULTI-USER ACCESS: Network versions support multiple and simultaneous access, from any drive resource. A sketch file, however, can be accessed by only one workstation at a time. Other workstations are advised that the file is in use. Each workstation can create a unique configuration file which specifies individual preferences including printer type, video display, data file directory, printer port, etc. Each workstation may also create 3 to 6 reference files in the resident directory. PRINTING: Printer output may be sent to any physical or redirected port, LPT1 through LPT3, or COM1 through COM4. Before starting APEX, issue a NET USE command through the operating system to establish a printer connection: NET USE LPT1 \\|@PRINTER Printer ports and type are selected from the APEX "OPTIONS/PRINTER SETTINGS" menu. If a sketch is printed over several pages, increase the LPT time-out value: NET LPT TIMEOUT 30 SECURITY: Sketch data files can be shared between users over the network. Use the standard LANtastic ACL security features to control access to sketch data or program files. NETWORK DISCONNECTS: If the network cable connection is broken for more than a few seconds, the workstation may appear to lockup. If attempts to (R)etry are unsuccessful, reboot the workstation. After restarting the computer and re-entering APEX, the last sketch will reload automatically and work can continue normally. Version History: 06/16/1993: APEX tested for compatibility with LANtastic v5.0. VENDOR INFORMATION: Apex Graphics Systems, Inc. 10609 IH 10 West Suite 203 San Antonio, TX 78230 Sales 800-858-9958 Fax line 210-699-1150 Technical Support 210-699-6666 BBS (14400,N,8,1) 210-699-9557 @FIDONET 1/387:455 ARTISOFT, Inc. makes no warranties as to the completeness or accuracy of this document. LANtastic is a trademark of ARTISOFT, Inc. Brand names, company names, and product names are trademarks or registered trademarks of their respective companies.