README.TXT
==========

SbcdNt.SYS (ver 1.02 Beta) for Windows NT (Final release)


Contents
========

SBCDNT.SYS
OEMSETUP.INF
TXTSETUP.OEM
DISK.ID
README.TXT



How to setup "CD-ROM driver for Sound Blaster Card"
===================================================

Before you do any installation, please read the instruction that comes with
Windows NT for any setup information.

There are two instants that you can install the SbcdNt.SYS driver.

T E X T   S E T U P   P H A S E
-------------------------------

Follow the steps below if you want to start a new Windows NT system.  You can
then install the Windows NT using the CD-ROM drive on Sound Blaster Card.  You
need to use the boot disk that comes with Windows NT to start the Windows NT
installation.


 1. Choose "Custom Setup" for Windows NT Setup.

 2. Enter "S" to install additional SCSI Adapters.

 3. Select "Other (Requires disk provided by a hardware manufacturer)".

 4. When the message "Manufacturer-supplied support disk into drive A:" shown,
    insert the disk into drive A:, followed by Enter.

 5. Choose "CD-ROM driver for Sound Blaster Card" to install this driver.

 6. Continue the normal setup procedure of Windows NT Setup that followed.



M A I N T E N A N C E	M O D E   S E T U P
-------------------------------------------

If you have already installed the Windows NT, follow the steps below to install
the driver.

 1. Open the "Main" program group.

 2. Invoke the program "Windows NT Setup".

 3. Open the pull down menu "Options".

 4. Select menu item "Add/Remove SCSI Adapters...".

 5. In the "SCSI Adapter Setup" poll out dialogue, press the "Add..." button.

 6. Select "Other (Requires a disk from a hardware manufacturer)" option from
    "Select SCSI Adapter Option" poll out dialogue.

 7. Insert this disk into floppy drive A: or B: then press "OK" button.

 8. You will see pop out menu "Select OEM Option".  Choose "CD-ROM driver for
    Sound Blaster Card" followed by "OK" button.  This will add "CD-ROM driver
    for Sound Blaster Card" into the option list of "Select SCSI Adapter
    Option".

 9. Press "Install" button to install the "CD-ROM driver for Sound Blaster
    Card".

10. You will see message "The SCSI Adapter selected is already installed".
    Press "OK" button.

11. Press "Cancel" button.  You will see "CD-ROM driver for Sound Blaster Card"
    in the installed list.

12. Remember to restart the Windows NT for the driver to take effect.


19.08.93.BEH