Here are the relevant fields out of FDSETUP.EXE for my system. Using a ZyXEL 1496S+ 19.2K modem. This first screen is MAILER -> ERRORLEVELS. Mailer Editor Terminal ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ÍÍÍÍÍÍÍ ³ÕÍÍÍÍÍÍÍÍÍ Errorlevels ¸±± ³³ ³±± ³³ 300 215 ³±± ³³ 1200 220 ³±± ³³ 1275 210 ³±± ³³ 2400 225 ³±± ³³ 4800 230 ³±± ³³ 7200 0 ³±± ³³ 9600 235 ³±± ³³ 12000 237 ³co ³³ 14400 240 ³±± ³³ 19200 245 ³in ³³ 38400 250 ³±± Ô³ Received mail 60 ³±± ±³ Create BAT.file No ³±± ±³ ³±± ±ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ;±± This screen is under MODEM -> HARDWARE. Editor Terminal Modem Printer ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Hardware ¸ ³ ³ ³ Modem port 1 ³ ³ Maximum baud rate 38400 ³ ³ Lock port Yes ³ ³ Reset modem to connect speed No ³ ³ Lower DTR when busy Yes ³ ³ Lower DTR to terminate call Yes ³ ³ Toggle DTR before dialing No ³ ³ Carrier detect mask (CDMASK) 128 ³ ³ Inbound buffer size 0 ³ ³ Outbound buffer size 0 ³ ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; This is MODEM -> MESSAGES Terminal Modem Printer M ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Messages ¸³ ³ ³³ ³ 300 CONNECT 14400 ³³ ³ 1200 CONNECT 1200| ³³ ³ 1275 CONNECT FAX ³¾ ³ 2400 CONNECT 2400 ³± ³ 4800 CONNECT 4800 ³± ³ 9600 CONNECT 9600 ³± ³ 19200 CONNECT 16800 ³± ³ 38400 CONNECT 19200 ³± ³ Error ERROR ³± ³ Busy BUSY ³e ³ No Carrier NO CARRIER ³± ³ Ok OK ³± ³ Ring RING| ³± ³ No Dialtone NO DIAL ³± ³ No Answer NO ANSWER ³± ³ Voice VOICE ³± ³ ³± ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ;± This is MODEM -> COMMAND STRINGS. If you'll notice the Init-1 line you'll see how to setup a ZyXEL modem to handle fax calls through FD also. You will also need a "CONNECT FAX" message in the MODEM -> MESSAGES section as I have above. The only other thing required for the fax is to have an entry in the MAILER -> EXTERNAL MAIL section like the screen below this one. Global Mailer Editor Terminal Modem Printer Mana ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ÍÍÍ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Command strings ¸± ³ ³± ³ Escape code +++ ³± ³ Return on-line ~~~ATO| ³± ³ Onhook ~+++~ATH0| ³± ³ Offhook ~~~ATH1| ³± ³ Dial ATDT ³± ³ ÃÄPrefix ³± ³ ÀÄSuffix | ³± ³ Delay 7 ³± ³ Init-1 ATZ|~AT#B1+FCLASS=6 ³± ³ Init-2 ATH| ³r ³ Init-3 ATZ0| ³± ³ Down AT| ³± ³ Reset AT| ³± ³ ³± ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ;± Now this screen is ONLY for the FAX, if you aren't trying to setup your fax (and aren't using a ZyXEL) then this sceen probably won't matter to you... BUT if you are here's how it's done. The string "ZyXEL" needs to be typed in that EXACT case...and then the errorlevel (210) needs to coordinate with whatever you've got setup in your batch file to handle an incoming fax call. As you can see I use errorlevel 210 for mine and if you look in my batch file you'll see I use a shareware program called REFAX for receiving incoming fax calls...it works well here. Mailer Editor Terminal Modem Printer Manager ÍÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ±³ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ External mail ¸ ±³³ ³ ±³³ String Level ³ ±³³ 1 ZyXEL 210 ³ ±³³ 2 0 ³ ±³³ 3 0 ³ ±³³ 4 0 ³ ±³³ 5 0 ³ ±³³ 6 0 ³ F³³ 7 0 ³ ±³³ 8 0 ³ 9³³ 9 0 ³ ±³³ 10 0 ³ ±Ô³ ³ ±±ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ;