Copyright (C) IBM Corporation, 1993
                                                           05/19/93
Group Folder - Dan Kehn (74140,3263) 

INSTALLATION

  First copy your GFOLDER.DLL file to a disk.  For example, 
  C:\OS2\DLL.  Copy the Group Folder help file, GFOLDER.HLP, to your 
  help directory, for example, C:\OS2\HELP.

  Then start the installation program, GFINST.EXE.  It will prompt 
  you for the path where your copied the GFOLDER.DLL.  When the 
  installation is complete, a new folder object called "Stuff" will 
  appear on your desktop.  

  Double-click the "Stuff" folder and select "Create standard groups"
  from the menu bar's Folder pulldown to create an example set of
  groups based on the objects included with OS/2.

NOTES:

  A few users have reported system hangs when GFolder is opened 
  while the system is heavily stressed (eg, during system boot).  
  I've traced the problem to multithreading within WPS/GFolder.  To 
  disable it, add:  

     SET GFOLDERSYNC=YES

  to your CONFIG.SYS.  This appears to prevent the hang, but makes 
  the opening of GFolder's synchronous, ie, you'll see the "wait" 
  cursor until the folder is done opening.  

UPGRADING TO NEW VERSIONS OF THE GROUP FOLDER:

  The GFOLDER.DLL cannot be replaced while it is in use by the 
  Workplace Shell.  A simple way around this problem is to add the 
  line below:  

    CALL=C:\OS2\CMD.EXE

  to the top of your CONFIG.SYS file and reboot.  A full screen 
  session will be started before the Workplace Shell is started.  
  Copy the new GFOLDER.DLL over the old and then EXIT to continue 
  booting.  Remember to remove (or comment out using REM) the line 
  above in your CONFIG.SYS.