                        START OF "VHELP2.HLP"
                           FCON HELP CONT.

                         V-EDIT VERSION 1.3



 TIME           SHOWS CURRENT TIME CHANGES EACH SECOND

 NOTE:          IF TIME DOES NOT FUNCTION PROPERLY ON YOUR MACHINE THEN
                IT MIGHT BE AN EARLY SIGN THAT YOUR RUNNING OUT OF MEMORY
                OR THAT "V-EDIT" OR "FCON" DOES NOT WORK PROPERLY ON YOUR
                SYSTEM. IF YOU FEEL THIS IS THE CASE THEN PLEASE CONTACT
                US, SO THAT WE MAY CUSTOMIZE A PROGRAM TO RUN IN YOUR
                PARTICULAR SYSTEM ENVIRONMENT. ALL VERSIONS OF "V-EDIT 1.0"
                ARE THE SAME PRICE NO MATTER WHAT WE HAVE TO DO TO GET IT
                TO WORK IN YOUR COMPUTER!  CALL US.



 PAGE BOX PROMPT

 F:     PROMPTS WHEN OPENING A FILE OF MORE THAN 1 PAGE

 K:     ENTER THE NUMBER OF THE PAGE THAT YOU WISH TO SEE WHEN YOU RETURN TO
        "V-EDIT."  CHOOSING 0 OR NOT SELECTING A PAGE WILL PUT YOU ON PAGE #
        1, SELECTING A NUMBER BEYOND THE PROMPT WILL PUT YOU ON THE LAST
        AVAILABLE PAGE OF THE DOCUMENT.  USE THE PAGE COMMAND IN "V-EDIT" TO
        SWITCH PAGES.

        ENTER                           EXECUTES

M:      LEFT CLICK,                     EXECUTES



ANIMATION WARNING PROMPT

        YES:    THE ENTIRE FILE WILL BE DISPLAYED TO THE SCREEN AS ONE PAGE,
                REGARDLESS OF THE NUMBER OF LINES.

        NO:     THE FILE IS BROKEN INTO 24 LINE PAGES AND YOU ARE PROMPTED
                FOR THE PAGE TO VIEW.

        NOTE:   ALTHOUGH YOU WILL SEE THE ANIMATION RESULT, ONLY THE FINAL
                SCREEN DISPLAY WILL BE SAVED. FUTURE VERSIONS OF V-EDIT WILL
                CONTAIN THE ABILITY TO EDIT AND SAVE ANIMATION FILES. RIGHT
                NOW WE ARE WORKING ON AN INTELLIGENT METHOD OF MANIPULATING
                "ANY" ANSI DRIVER, SUCH THAT A TIME DELAY OF 5 SECONDS DOESN'T
                COST YOU 41000 BYTES OF REDUNDENT CODE. WE FEEL THIS IS VERY
                INEFFICIENT. 

                IF YOU WANT TO MODIFY OR SAVE ANIMATION FILES, WE STILL HAVE
                A CRUDE METHOD. ON OPENING YOUR FILE CHOOSING YES FOR THE
                DISPLAY METHOD. WHILE STILL IN FCON, YOU MAY SAVE OR APPEND
                DIRECTLY TO OTHER FILES, OR IF YOU CHOOSE VIEW YOU CAN MODIFY
                THE ACTUAL CODE IN THE ASCII EDITOR BOX THEN AGAIN RESAVE, &
                RENAME THE FILE, OR EVEN EXPORT THE FILE TO A FONT FORMAT.



OTHER PROMPT BOXES:        FOLLOW "ANSI'S" INSTRUCTIONS.

GENERAL ERROR MESSAGES:    MOST ERRORS HAVE BEEN TRAPPED, HOWEVER IF YOU
                           FIND ONE THAT HASN'T BEEN, OR FIND A FUNCTION
                           TO BE "BOGUS" PLEASE LET US KNOW, SO THAT WE
                           CAN MAKE APPROPRIATE CHANGES ON FUTURE VERSIONS
                           OF "V-EDIT."

                           BE CAREFUL WHEN OPENING ONE LINE FILES WITH MORE
                           THAN 4000 CHARACTERS ON THE LINE, IN ANSI, PCB, 
                           OR VBBS FORMATS. YOUR MACHINE MIGHT LOCK UP. ASCII
                           FILE FORMATS DON'T MATTER.


STARTING A FILE FROM THE COMMAND LINE:

        TYPE:     "V" + "SPACE" +  "FILENAME"        PRESS ENTER
          OR:     "VEDIT" + "SPACE" +  "FILENAME"    PRESS ENTER

             IF THE FILENAME IS IN THE CURRENT \VED DIRECTORY
             OTHERWISE USE THE DRIVE AND FULL PATH AND THE
             FILENAME.

             V-EDIT & FCON ARE NOW DESQview AWARE, AND FOR THAT 
             MATTER WILL RUN IN ANY MULTITASKING ENVIRONMENT.
             AND NOW VERSION 1.3 WILL RUN INSIDE OF PC BOARD.
             

V-EDIT NOW READS AND WRITES TO DISK. THE SIZE OF YOUR FILES CREATED ONLY
DEPENDS ON THE AMOUNT OF HARD DISK SPACE YOU HAVE AVAILABLE. IN OTHER WORDS
IF YOU WANT TO CREATE 600 MILLION NEW PAGES...YOU CAN DO THAT IF YOUR HDD
CAN HOLD 600 MILLION PAGES.  ALSO WHEN OPENING LARGE FILES, BE PATIENT 
V-EDIT PROCESSES OVER 84,000 TESTS PER PAGE READ, ALTHOUGH WE HAVE RELENT-
LESSLY TRIED TO IMPROVE OUR CONVERSION SPEED, IT MAY TAKE SEVERAL MINUTES
TO CONVERT A FILE MORE THAN 30 PAGES LONG.


BUZZ, BEEPS, CHIRPS             ATTENTION SIGNALS, SEE "V-EDIT" COMMAND HELP



INTERMISSION:

WHEN "V-EDIT" EXITS IT CONVERTS ALL INTERNAL DATA FROM THE SYSTEM FORMAT TO
ANSI FORMAT, BY READING ALL THE SCREENS ONTO THE DOS WINDOW. THE LAST BLOCK
SCREEN IS SAVED AS "PASTE.DAT," THE CURRENT DRAWING WITH ALL OF ITS PAGES AS 
WELL AS THE CURRENT SCREEN, AND THE BLOCK DATA ARE SAVED TO FILES: ANSI.TMP,
SCREEN.DAT, AND PASTE.TMP. THEN THE CURRENT DRAWING IS CONVERTED TO VBBS AND
PCB FORMATS RESPECTIVELY.  THE FILE "NEXT.DAT" IS UPDATED AND RESAVED. THEN
"FCON.EXE" IS CALLED.  YOUR LAST PASTED BLOCK REMAINS INDEFINITELY, UNLESS
YOU RE-BLOCK SOMETHING NEW, ERASE THE PASTE.TMP FILE, OR ENCOUNTER AN ERROR,
WHICH IN TURN ERASES THE PASTE.TMP FILE. YOU CAN PASTE YOUR BLOCK BETWEEN
PAGES, FILES, DAYS. IE: QUITING V-EDIT DOES NOT DISGARD THE BLOCK INFO.


"SQZANSI" IS NOW "SQZ" A STAND ALONE CONVERTER, V-EDIT 1.3 NOW USES THE
CONVERSION ENGINE OF SQZ, THEREBY ELIMINATING THE NEED FOR ANOTHER CHAIN.
V-EDIT NOW PRODUCES THE SMALLEST ANSI OUTPUT FILES AVAILABLE FROM ANY EDITOR.
"SQZ" INCLUDES A FEATURE CALLED "HYPER-SHRINK" WHICH WILL DECREASE ANSI FILES
UP TO AN ADDITIONAL 20 % MORE.


WHEN "FCON.EXE" OPENS A FILE, THE ARRAY THAT'S STORING THE CURRENT DRAWING
IS REDIMMED THEREFORE ERASING THE CURRENT DRAWING FROM MEMORY. THE NEW FILE
IS READ ONTO THE DOS WINDOW AND CONVERTED BACK TO SYSTEM FORMAT CODE.

ANIMATION FILES ARE DETERMINED BY SEARCHING THE FILE FOR "2 ESC[s" OR ";1H"
SOMETIMES THESE FILES ARE MISSED AND LOADED IN TRUE ANSI 24 LINE PER PAGE
FORMAT. AGAIN THIS IS A "LETS MAKE V-EDIT MORE COMPATABLE" TYPE FUNCTION.
OUR FUTURE VERSIONS WITH TRUE ANIMATION CAPABILITY, WILL NOT USE "ESC[s 's"
OR ANY REDUNDANT CODE TO SIMULATE TIME DELAY. 
                                              


IS THERE AN EASIER WAY?  WE'RE WORKING ON IT!  
VERSION 2.0 ?  YES, EARLY 1994.....     BIGGER BUT FASTER CODE
                                        EMS SUPPORT, RIP CONVERSION
                                        ANIMATION, SCALABLE FONTS, SPRITES
                                        VGA GRAPHIC CONVERSION
                                        FULL MOTION VIDEO SUPPORT
                                        "MIDVID"

AND YES IT WILL COST MORE, HOWEVER IF YOU BUY VERSION 1.0, 1.X, THEN  
YOU'LL GET A 25% DISCOUNT ON VERSION 2.0.

              
   NOTE: OUR BBS: "FULL MOTION NET" IS OUT OF BETA TEST AND NOW OPEN TO ALL.
         SO, IN LIGHT OF THAT, ALL FUTURE UPDATES AND UTILITY FILES IN THE
         V-EDIT 1.0 - 1.X SERIES, SHALL ONLY BE POSTED THERE.
              
         PHONE TIME COST US MONEY TOO!     
         
    **   IF YOU HAPPEN TO CREATE SOME UNIQUE CLIP ART, SEND IT TO US WITH     
         YOUR NAME / AND OR ADVERTISEMENT, AND WE WILL INCLUDE IT, IN FUTURE
         SCREEN FONT FILES, BOTH POSTED AND INCLUDED IN OUR PROGRAM PACKAGES.

         GETS YOUR NAME AROUND, BUILDS OUR FILE AREA... MUTUALLY BENEFICIAL!

              
              
              
              YES OUR PRICES AND OFFERS CHANGE WITHOUT NOTICE
                          WE RESERVE THAT RIGHT!

FILES INCLUDED IN "V-EDIT 1.3"

VEDIT.EXE       SCREEN EDITOR
FCON.EXE        FILE CONVERSION, MANAGER, GENERAL UTILITY
VSETUP.EXE      CREATES NEXT.DAT AS PER YOUR SYSTEM
RVBLOCK.EXE     UTILITY TO REMOVE "\VED\V BLOCK" DIRECTORY
                ONLY INCLUDED IN REGISTERED VERSION

FMNFONT.001     THIN DOUBLE LINE FONT SET
FMNFONT.002     MEDIUM OUTLINE FONT SET
FMNFONT.003     DOUBLE LINE OUTLINE FONT SET
FMNFONT.004     BOLD OUTLINE FONT SET
FMNFONT.005     SHADOW OUTLINE FONT SET
FMNFONT.006     COLOR OUTLINE FONT SET
FMNFONT.007     MUTANT OBJECT FONT SET
FMNFONT.008     AFTER THOUGHT COLLECTION OF MISC. SCREENS

ONFONTS.TXT     FILE EXPLAINING FORMAT FOR V-EDIT FONTS.

BLOKSCRN.FMN    SAMPLE SCREEN FILE \
DIAGSCRN.FMN    SAMPLE SCREEN FILE  - ->  FOUND WITHIN FMNFONT.008
WIERD.FMN       SAMPLE SCREEN FILE /

V.BAT           SIMPLE BATCH FILE, SAVES & RESTORES PROMPT FEEL FREE TO 
                MODIFY IT TO SUIT YOUR NEEDS. ALSO PASSES PARAMETERS.

VSHELL.BAT      SHELL BATCH FILE, NEEDED BY SHELL COMMAND. 

FONTHELP.HLP    1 PAGE HELP COMMANDS FOR FONT FUNCTION, F11...USE F1
                FROM WITHIN FONT FUNCTION TO DISPLAY THIS SCREEN.

VCHELP.HLP      "V-EDIT" COMMAND HELP, CAN NOT BE APPENDED AS WILL CRASH
VHELP1.HLP      LAST FILE...FIRST PART OF FCON HELP, ^S SWITCHES FILES.
VHELP2.HLP      THIS FILE...FEEL FREE TO ADD NOTES HOWEVER YOU ARE LIMITED
                TO A MAXIMUM FILE SIZE OF 32K OR IT WILL NOT FIT INTO "VISUAL
                BASIC'S TEXT BOX" THIS OBJECT.

VDOC.PRN        3 PAGES OF STUFF THAT I HAD TO ADD AS WELL AS ORDER FORM
                THIS IS IN WP51 FORMAT BUT INCLUDES ALL THE GRAPHIC CODES FOR
                A LASER OR "FOR SOME OTHER PRINTERS" YOU NEED NOT HAVE WORD
                PERFECT...JUST TYPE THE FOLLOWING: "COPY VDOC.PRN LPT1:"

README.NOW      WHAT TO DO FIRST!
CHANGES.TXT     WHAT IS DIFFERENT FROM VERSION 1.2

ALL EXE FILES ARE PKLITED, WITH EXTRACTABLE CODE IN THE CASE THAT IT DOESN'T
WORK ON YOUR SYSTEM. USE -X TO EXTRACT. BUT, THIS DOESN'T GIVE YOU THE RIGHT
TO REVERSE ENGINEER OUR PROGRAM, AND STEAL OUR SOURCE CODE. AND IF YOU DID
WE CAN IMMEDIATELY TELL FROM THE SIGNITURE OF OUR OUTPUT CODE.

FILES CREATED DURING RUN:

ANSI.TMP        CURRENT DRAWING IN ANSI FORMAT  "FULLY RE-EDITABLE"
                INSTANT MANIPULATION UPON OPEN FROM FCON, WITHOUT
                HAVING TO GO TO EDITOR AND BACK.

HHOLD.TMP       CREATED & ERASED INTERNALLY, TMP STORAGE FOR ASCII FORMAT

PCB.TMP         CURRENT DRAWING IN PCB FORMAT   "FULLY RE-EDITABLE"

VBBS.TMP        CURRENT DRAWING IN VBBS FORMAT  "FULLY RE-EDITABLE"

SCREEN.DAT      CURRENT DRAWING, CURRENT PAGE   "FULLY RE-EDITABLE"  TOO!

PASTE.TMP       LAST BLOCK SAVED IN ANSI FORMAT "FULLY RE-EDITABLE"  TOO!

NEXT.DAT        CREATED & UPDATED WHILE PASSING INFORMATION TO AND FROM
                V-EDIT AND FCON.
        
EXPLANATION OF NEXT.DAT        


LINE #1         "DREW" OR "NEWDRAW" OR "FILEDRAW" OR "OLDFILEDRAW"
LINE #2         VTIME#                  DURATION OF MESSAGE DISPLAY, SEE ^T
LINE #3         DBC%                    DEFAULT BACKGROUND COLOR
LINE #4         LAST BlockTopRow%       COORDINATES, 0 IF NONE
LINE #5         LAST BlockLeftCol%      COORDINATES, 0 IF NONE
LINE #6         LAST BlockBottomRow%    COORDINATES, 0 IF NONE
LINE #7         LAST BlockRightCol%     COORDINATES, 0 IF NONE
LINE #8         Page%                   PAGE# V-EDIT COMMAND HELP WAS LEFT AT
LINE #9         CurrentPage%            CURRENT PAGE OF DRAWING
LINE #10        GETLETTER$              DRIVE LETTER WHERE "\VED" DIRECTORY IS
LINE #11        NPAGES%                 TOTAL # OF PAGES IN CURRENT DRAWING
LINE #12        COMLIN$                 STRING HOLDING COMMAND LINE FILE NAME

LINE #13        "ASCII" OR ""           IF BLANK BOTH PROGRAMS PROCESS THE
                                        CURRENT SCREEN, OR FILE AS A NORMAL
                                        ANSI FILE WITH FULL CONVERSION FEATURE

                                        HOWEVER, WHEN "ASCII" IS PRESENT THE
                                        CONVERSION ENGINES, DO NOT ADD ESCAPE
                                        SEQUENCES TO THE FILE, AND THE FILE
                                        IS NOT PROCESSED THROUGH THE "VBBS"
                                        AND "PCB" CONVERSION UTILITY, SINCE
                                        THAT WOULD BE POINTLESS BECAUSE, YOU
                                        WOULD END UP WITH THE SAME FILE ANY-
                                        WAY. ALL FEATURES STILL WORK NORMALLY
                                        IN FCON EVEN IF YOU SELECT, "SAVE AS
                                        PCB FORMAT".....

LINE #14        "APV"                   FOR THE "DEF FORMAT" FUNCTION, A IS
                                        FOR ANSI, P = PCB, V = VBBS. THE SEQ-
                                        UENCE IS: SAVE, APPEND, VIEW.
                                        
LINE #15                                INTERNAL USE
LINE #16                                INTERNAL USE

LINE #17        "PCBPOS" / ""           IF "POSPCB" THE ALT+M FUNCTION IS ON.                
                                        THIS FUNCTION FINDS REDUNDANT SPACES
                                        IN A PCB CODE FILE, AND CONVERTS THEM
                                        TO COLUMN POSITIONING, USING THE PCB
                                        AT MACRO "@POS:NN@"


SHOULD YOU LOSE THIS FILE OR WISH TO MANIPULATE "FCON" TO START UP WITHOUT
GOING TO "V-EDIT" FIRST YOU MAY EDIT OR CREATE THIS FILE IN ANY ASCII EDITOR.

IF LINE# 1 OF "NEXT.DAT" READS "NEWDRAW" ATTEMPTING TO START "FCON.EXE" WILL
ONLY RESULT IN STARTING "VEDIT.EXE" FIRST. USE "DREW."

POINT OF INTEREST:  USING DOS SET COMMANDS, RELOCATING "V.BAT," OR STARTING
                    "V-EDIT" FROM AN ALTERNATIVE DIRECTORY WILL SET "FCON"
                    TO BE THERE.

MUSTS:  YOU MUST INSTALL OR COPY ALL "V-EDIT" FILES TO A ROOT DIRECTORY
        CALL N:\VED, WHERE N IS A VALID HARD DRIVE LETTER.  ALL FILES
        LOAD AND SAVE TO FILES IN [ DRIVE LETTER + "\VED" ]; IF NOT NOTHING
        WILL WORK.

COULDN'T YOU HAVE ADDED...?  HAVEN'T WE ADDED ENOUGH? GEE... MAYBE AT LEAST 
ONE PERSON WILL BUY THIS VERSION....SORTA MAKES US DOUBT THE HONESTY OF OUR
USERS?

"ANSI"          THE ENTITY THAT CALLS YOU "DUDE,"  HE IS UNBIASED TO GENDER
                SO DON'T BE OFFENDED....HE DISDAINS ALL HUMANS EQUALLY.
                HE RESIDES IN OUR SERVER AT FULL MOTION NET (tm) AND EVEN
                HAS HIS OWN LAB! HE OFTEN LIKES TO REEK HAVOC WITH OUR EISA
                MACHINES....MAYBE YOU'VE SEEN HIM TOO?

WHO WROTE THIS PROGRAM?         ....A WIZARD, SOME MUTANTS AND THE LORD!
WHAT'S TODAY?                   7/26/93

DID I MISS ANYTHING?  IF SO, CALL US WE'LL BE ELATED TO ANSWER YOUR QUESTIONS



V-EDIT.DOC 06.26.93

Copyright (c) 1993 by Full Motion Net Software.
All Rights Reserved.

This version of V-EDIT is NOT public domain or freeware, but is being distri-
buted as "shareware." Non-registered users are granted a 30 day trial license 
for the express purpose of determining whether  V-EDIT  is suitable for their 
needs.  At the end of this trial period, you should either register your copy 
or discontinue using V-EDIT.

Full Motion Net Software
2005 Hemlock Lane
Mays Landing, N.J. 08330-9678

VOICE: (609)625-4679 or: (609)346-0568 BBS: (609)625-4475

Send check or money order for $22.00 with return information, or contact
Full Motion by voice or our support BBS for registration information.

        þ       Full Motion Net is a trademark(tm) of Full Motion Net.
        þ       PCBoard is copyright by and a registered trademark of
                Clark Development Co.Inc. Murray, Utah
        þ       VBBS (Virtual BBS/NET) is copyright by Roland De Graaf

DISCLAIMER

Use of this program acknowledges this disclaimer of warranty: "This program 
is supplied as is.  Full Motion Net Software and  Full Motion Net disclaims 
all warranties, express or implied, including, without limitation, the war-
ranties of merchantability and of fitness of this  program for any purpose. 
Full Motion Net  Software  nor  Full  Motion  Net  assumes no liability for 
damages  incidental  or consequential,  or direct which may result from any 
use of this program."


LICENSE

This version of V-EDIT is NOT public domain or free software, but is
being distributed as "shareware".

Non-registered users of this software are granted a  limited license to make 
an evaluation copy for trial use on a private, non-commercial basis, for the 
express purpose of determining whether  V-EDIT  is suitable for their needs.  
At the end of this  trial period,  you should either  register your  copy or 
discontinue using V-EDIT.

A V-EDIT registration  entitles you to use the program on any and all compu-
ters available to you, with the following restriction:  If other people have 
access  to  this  program or  may use it,  then  additional copies or a site 
license should be purchased.  Please call Full Motion Net for details.

All users are  granted a  limited  license to copy V-EDIT only for the trial 
use of others and subject to the above  limitations.  This  license does NOT 
include distribution or copying of this software package: 

        1. In connection with any other product or service.
        2. For general use within a company or institution.
        3. For any consideration or 'disk fee'.
        4. For distribution in modified form; i.e., the file containing
           this license information MUST be included, along with the full
           V-EDIT documentation.

Operators of  electronic  bulletin board systems  (Sysops) are encouraged to 
post V-EDIT for downloading by their users,  as long as the above conditions 
are met.  Disk vendors MUST obtain written  permission from  Full Motion Net 
before  distributing  V-EDIT.  Certain  restrictions  apply.  Generally  ASP 
approved  vendors  are granted  permission;  others are handled on a case by 
case basis. Contact Full Motion Net for details.
                                       

TRADEMARK


        -       Full Motion Net is a trademark(tm) of Full Motion Net.
        -       PCBoard is copyright by and a registered trademark of
                Clark Development Co.Inc. Murray, Utah.
        -       VBBS (Virtual BBS/NET) is copyright by Roland De Graaf.
        -       DOS is a product and trademark(tm) of MICROSOFT CORP.        
        -       WORD PERFECT is a product and (tm) of MICROSOFT CORP.        
        -       PKLITE is a product and (tm) of PKWARE.
        -       missed anyone or wrong info....sorry, please let us know
                and we'll correct our errors.


ORDERING INFORMATION

  A V-EDIT registration licenses you to use the product on a regular basis.  
  Registration also includes notification of updates and telephone support, 
  and  entitles  you  to   access  to  the  registered  user  area  of  our 
  BBS  (609-625-4475,  N81,  USR 16.8 HST/Dual, 24 hours a day). Individual 
  registrations of  V-EDIT are $22.00. The latest version may be downloaded 
  from our BBS, or for $5.00 for media and shipping we will mail your copy.

New Jersey residents should include 6% sales tax.

                                                     

Remit to:       Full Motion Net                      
                2005 Hemlock Lane
                Mays Landing, N.J. 08330-9678


*** V-EDIT version 1.2, June 1993. ***

VOICE:  (609) 625-4475,         Mon. - Fri., 9:00 a.m. - 5:00 p.m., EST ONLY.
        (609) 346-0568, 24 hours a day, machine or sometimes living.
BBS:    (609) 625-4475, 24 hrs, 7 days a week. USR 16.8 HST/Dual.


ORDER FORM
                                                Order Form  #9004-MUTANTS

Send me:                (check desired items)

____ V-EDIT Registration ......................... @ $22.00 ea  $ ______
     (Includes latest version of the licensed software, BBS and voice support 
     and documentation file. You download from BBS).
     PAY: $ 22.00 AND YOU'LL BE GIVEN ACCESS TO DOWNLOAD THE LASTEST VERSION
                  OF "VEDIT AND ALL COMPANION FILES,"
                  FROM THE "FULL MOTION NET BBS" ONLY!

---- V-EDIT on Disk .............................. @ $27.00 ea  $ ______
     (Includes latest version  of the  licensed software and documentation on 
     disk, includes shipping and handling). "sent UPS"
     PAY: $ 27.00 AND WE WILL SHIP YOU THE LATEST VERSION OF "VEDIT AND ALL 
                  COMPANION FILES." 1.44M SENT UNLESS OTHERWISE REQUESTED.
                                                
                                                     Subtotal:  $ ______

New Jersey Residents please add Sales Tax ...............@ 6%   $ ______

Total (U.S. Funds drawn on U.S. Bank)                           $ ______
                                         

Payment by:   ( )CHECK(mail only) ( )M.O.(mail only) ( )AMERICAN EXPRESS

        Name:___________________________________________________________
                                                            
        Company (ONLY if company address):______________________________

        Address:________________________________________________________

        :_______________________________________________________________

        :_______________________________________________________________

        Voice Day Phone:_________________  Evening:_____________________

        Card #:__________________________  Exp. Date:___________________

        Signature of cardholder:________________________________________


           Above quoted prices will stay in effect until DEC. 1, 1993
                        (609) 625-4679 or (609) 346-0568


          WANNA' BUY A SITE LIC. OR EVEN PARTS OF THE SOURCE CODE ?
                                CALL US !
