!!!   IMPORTANT   !!! 

1) Lotus 1-2-3 and Microsoft Word are supported as Windows applications only.

2) Microstation PC CAD and PCAD are not listed in the installation menu, but
   are on the second disk in the MICRO and PCAD sub-directories respectively.
   See their respective "README.TXT" files for installation instructions.

3) Protected mode drivers are provide for AutoCAD R11, & R12 only.

4) Drivers are provided for OS/2 2.1 ONLY, & are available from the BOCA BBS
   at (407) 241-1601, 8, N, 1.


Additional Notes:

I.     VORTEK Board Installation:
	1) Insert the installation disk #1 into drive A or B.
	2) Change drive to A or B.
	3) Type install and follow the on screen instructions. 


II. Using QEMM386 with the VORTEK Board:
	1) Add the following options while loading QEMM386:
		X=B100-B1FF RAM
	2) If there is still conflict, change the options as follows:
		X=A000-C7FF RAM NO NS NT NX NV NR NRH NOSH
	3) If you still encounter problems:
		remove the 'RAM' option

III. Using EMM386 with VORTEK Board:
	1) Add X=B100-B1FF to EMM386 line.
	2) If you still encounter problems:
		Follow the instructions in README.WRI section 4.1 under your
		Windows directory.

IV. Supported modes.

     AGX1280.DRV     1280x960x8 (Requires 2 meg of VRAM).
     AGX.DRV         1280x1024x4
		     1024x768x8 Large Font
		     1024x768x8 Small Font
		     800x600x8
		     640x480x8
     AGX80016.DRV    800x600x16
     AGX64016.DRV    640x480x16
     AGX16.DRV       640x480x16 (Requires 2 meg of VRAM)
		     800x600x16 (Requires 2 meg of VRAM)
		     1024x768x16 (Requires 2 meg of VRAM)
     AGX80024.DRV    800x600x24 (Requires 2 meg of VRAM)
     AGX64024.DRV    640x480x24 
	    

VII. System.ini Switch Settings for AGX.DRV

     AGX_Mode   =     0 = N.S
		      1 = 640x480x8
		      2 = 640x480x16
		      3 = 640x480x24
		      4 = N.S
		      5 = 800x600x8
		      6 = 800x600x16
		      7 = 800x600x24
		      8 = N.S
		      9 = 1024x768x8
		      10 = 1024x768x16
		      11 = N.S
		      12 = 1152x900x4
		      13 = N.S
		      14 = N.S
		      15 = N.S
		      16 = N.S
		      17 = 1280x960x8
		      18 = N.S
		      19 = N.S
		      20 = N.S
		      21 = 1280x1024x8
		      22 = N.S
		      23 = N.S

     AGX_Dac_Type =   0 = bt481
		      1 = bt482
		      2 = sc11485
		      3 = sc11487
		      4 = sc11489
		      5 = reserve
		      6 = at&t490
		      7 = at&t491
		      8 = sc15025
		      9 = bt485

     AGX_Buffer   =   0 = CPU interface buffer off
		      1 = CPU interface buffer on

     AGX_Chip_Rev =   14= AGX14
		      15= AGX15

     CRTParms =    "CRT file"

     AGX_15_Rev  =  1 = Rev.C
		    2 = Rev.D