DTK Computers Technical Information Sheet for PEM2500 Page 1 S=shorted, O=open DIP switch 1=on 0=off Utility Diskette is UTILDSK3.1_0 Uses 32bit Memory Board PEI-306 Total 32bit memory SW1 1,2,3 MotherBoard Total Memory SW1 4,5 MB 1 2 3 4 5 Memory Bank 0 Bank 1 1,2 1 1 1 1 1 2MB 1MB 1MB 3,4 1 1 0 1 0 4MB 4MB 0MB 5,6 0 1 1 0 1 5MB 1MB 4MB 7,8 0 1 0 0 0 8MB 4MB 4MB 9,10,11,12 0 0 1 13,14,15,16 0 0 0 Video Selection SW1 6 SW1-6 Selection J1:Keyboard lock 1 Color <1> Power LED 0 Monochrome <2> Key <3> Ground J2:Reset Switch <4> Keyboard inhibit <1> Hardware Reset <5> Ground <2> Ground J3:Speaker connector J4:Turbo LED <1> Speaker <1> LED + <2> N.C. <2> LED - <3> Ground <4> Vcc J5:Turbo Switch Connector 1-2 S 10 Mhz W1-W6:SIMM Bank # 2-3 S Keyboard Control 1-2 S SIMM's are Bank 0 No Cap 25 MHz always 2-3 S SIMM's are Bank 1 W7:Bank 0 DRAM type W8:Bank 1 DRAM type 1-2 S 1mBIT 1-2 S 1Mbit 2-3 S 256kbit 2-3 S 256kbit W9-10:Cache Size W11:8 bit Adapter Wait States 1-2 S 64K 1-2 S 7 WS 2-3 S 256K 2-3 S 5 WS W12:16bit Adapter Wait State W13:DMA&I/O Bus Clock Select 1-2 S 3 WS 1-2 S 6Mhz DMA 12MHz Bus 2-3 S 1 WS 2-3 S 3Mhz DMA 6MHz Bus W14:Coprocessor Select S Not Installed O Installed J8:Power Connector <1> +5VDC <7> Ground <2> +5VDC <8> Ground <3> +5VDC <9> -12VDC <4> -5VDC <10> +12VDC <5> Ground <11> +5VDC <6> Ground <12> Power Good DTK Computers Technical Information Sheet for PEM2500 Page 1 S=shorted, O=open DIP switch 1=on 0=off RAM Installation RAM DRAM Type SW1 Size Bank 0 Bank 1 W1~W6 1 2 3 4 5 W7 W8 1MB 44256x8+41256x4 none 2-3 1 1 1 1 1 2-3 2-3 256Kbitx4 SIP none 1-2 1 1 1 1 1 2-3 2-3 2MB 44256x8+41256x4 44256x8+41256x4 2-3 1 1 1 1 1 2-3 2-3 44256x8+41256x4 256Kbitx4 SIP 2-3 1 1 1 1 1 2-3 2-3 256Kbitx4 SIP 44256x8+41256x4 1-2 1 1 1 1 1 2-3 2-3 4MB 41100x36 none 2-3 1 1 0 1 0 1-2 1-2 1Mbitx4 SIP none 1-2 1 1 0 1 0 1-2 1-2 5MB 44256x8+41256x4 1Mbitx4 SIP 2-3 0 1 1 0 1 2-3 1-2 8MB 1Mbitx4 SIP 1Mbitx4 SIP 2-3 0 1 0 0 0 1-2 1-2