TITLE: 104XX ESDI DRIVES AND ADAPTERS ERRORS...............1026

10440    8550-021 60 Meg ESDI Adapter Error.
10441    8550-021 60 Meg ESDI Adapter Error.
10442    8550-021 60 Meg ESDI Adapter Error.
10443    8550-021 60 Meg ESDI Adapter Error.
10444    8550-021 60 Meg ESDI Adapter Error.
10445    8550-021 60 Meg ESDI Adapter Error.
10446    8550-021 60 Meg ESDI Adapter Error.
10447    8550-021 60 Meg ESDI Adapter Error.
10450    DIAGS Error - Replace drive (read write test failed)
10451    DIAGS Error - Replace drive (read verify test failed)
10452    DIAGS Error - Replace drive (seek test failed)
10453    DIAGS Error - Replace drive (wrong drive type indicated)
10454    DIAGS Error - Controller (controller test failed sector buffer test)
10455    DIAGS Error - Controller (controller failure, invalid failure)
10456    DIAGS Error - Controller (diag command failure)
10457    DIAGS Error - Repl. drive (integrated controller test failure)
10458    DIAGS Error - Repl. drive (integrated controller test failure)
10458    DIAGS Error - If 8570-121 or 8570-A21 see ECA020
10459    DIAGS Error - Replace drive (diag command failure)
10460    DIAGS Error - Unknown. Repl. drive, then controller, then system board
10461    DIAGS Error - Drive fromat error
10462    DIAGS Error - Controller (head select error)
10463    DIAGS Error - Drive (read/write sector error)
10464    DIAGS Error - Drive (primary map unreadable)
10465    DIAGS Error - Controller (ECC 8 bit error)
10466    DIAGS Error - Controller (ECC 9 bit error)
10467    DIAGS Error - Drive (soft seek error)
10468    DIAGS Error - Drive (hard seek error)
10469    DIAGS Error - Drive (drive soft error count execeeded)
10470    DIAGS Error - Controller (attachment diag error)
10471    DIAGS Error - Controller (wrap mode interface error)
10472    DIAGS Error - Controller (wrap mode drive selected error)
10473    DIAGS Error - Unknown. Repl. drive, then controller, then system board
10474    DIAGS Error - Unknown. Repl. drive, then controller, then system board
10475    DIAGS Error - Unknown. Repl. drive, then controller, then system board
10476    DIAGS Error - Unknown. Repl. drive, then controller, then system board
10477    DIAGS Error - Unknown. Repl. drive, then controller, then system board
10478    DIAGS Error - Unknown. Repl. drive, then controller, then system board
10479    DIAGS Error - Unknown. Repl. drive, then controller, then system board
10480    POST Error - Replace disk "C" (seek failure)
10480    DIAGS Error - Controller (com/data-attn bad)
10481    POST Error - Replace disk "D" (seek failure)
10481    DIAGS Error - Controller (xfr req-ready bad)
10482    POST Error - Replace controller (failed controller test)
10482    DIAGS Error - Controller (drvsell-xfr ack bad)
10483    POST Error - Replace controller (failed reset)
10483    POST Error - If 8570-121 or 8570-A21 see ECA020
10483    DIAGS Error - Controller (drvse10-config/stat bad)
10484    DIAGS Error - Controller (hdse13-selected bad)
10485    DIAGS Error - Controller (hdse12-selected bad)
10486    DIAGS Error - Controller (hdse11-selected bad)
10487    DIAGS Error - Controller (hdse10-selected bad)
10488    DIAGS Error - Controller (rg - cmd cmplt 2)
10489    DIAGS Error - Controller (wg - cmd cmplt 1)
10490    POST Error - Replace disk "C" (read failure)
10490    DIAGS Error - Controller (drive connected no test done)
10491    POST Error - Replace disk "D" (read failure)
10499    DIAGS Error - Controller Failure
~~~~~