ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Inboard 386 Technical Information º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ARCHITECTURE The Inboard 386 uses a replacement architecture. This means that you remove the 80286 from your system and replace it with a cable that runs to the Inboard 386. CHIPS & TECHNOLOGIES BENCHMARK PROGRAM - VER. 1.20 For this testing, the Inboard 386 resided in an IBM PC AT/339 and filled conventional memory from 256K to 640K. A separate routine was used to fill the first 300K of memory to ensure that test ran solely in Inboard 386 memory. The following table shows the Inboard 386's performance relative to an IBM PC, IBM PC AT, and COMPAQ Deskpro 386. ÚÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄ¿ ³ IBM PC ³ IBM PC AT ³ COMPAQ ³Inboard³ ³ 4.77 MHz ³ 8 Mhz ³ 386/16 ³ 386 ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍØÍÍÍÍÍÍÍÍÍÍØÍÍÍÍÍÍÍÍÍÍÍØÍÍÍÍÍÍÍÍØÍÍÍÍÍÍ͵ ³ General Instructions ³ 7.40 ³ 2.15 ³ 1.09 ³ 1.22 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ³ Integer Instructions ³ 15.27 ³ 2.39 ³ 1.05 ³ 2.57 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ³ Memory to Memory ³ 5.68 ³ 1.75 ³ 0.98 ³ 1.35 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ³ Register to Register ³ 19.07 ³ 2.48 ³ 1.04 ³ 3.43 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ³ Register to Memory ³ 6.14 ³ 1.84 ³ 1.02 ³ 1.89 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄ´ ³ Overall Performance ³ 8.75 ³ 2.11 ³ 1.04 ³ 2.09 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÙ NORTON UTILITIES SYSTEM INFORMATION (SI) BENCHMARK Norton Utilities Version 3.10 has two versions of the SYSINFO (SI) program. One is 7,056 bytes and dated 11/15/86; the other is 7,216 bytes and is dated 1-03-86. Intel ran its benchmarks using the 11/15/86 version of SI. If you receive different performance ratings when running this program, check the date and size of the program -- it may not be the same version Intel used. For this testing, the Inboard 386 resided in an IBM PC AT/339. The following table shows the Inboard 386's performance relative to an IBM PC AT and IBM PS/2 Model 60. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ IBM PC ³ IBM PS/2 ³ IBM PC AT/339 ³ ³ AT/339 ³ Model 60 ³ with Inboard 386³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍØÍÍÍÍÍÍÍÍÍÍÍÍÍØÍÍÍÍÍÍÍÍÍÍÍÍÍØÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵ ³ Dhrystones ³ 1428 ³ 1785 ³ 3571 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ PC Tech Journal ³ ³ ³ ³ ³ busperf ³ 4.51 ³ 5.67 ³ 13.32 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Hard disk ³ ³ ³ ³ ³ average seek ³ 34.7ms ³ 37.2ms ³ 34.7ms ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Effective disk ³ ³ ³ ³ ³ transfer rate ³ 170Kb/sec ³ 256Kb/sec ³ 170Kb/sec ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ MIPS ³ 0.96 ³ 1.21 ³ 2.09 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ SI 3.0 ³ 7.7 ³ 10.1 ³ 18.7 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Notes: 1. Dhrystones are an industry standard measure of CPU and memory subsystem performance. 2. Busperf is the expansion bus performance benchmark that gives a number relative to the bus on a 4.77-MHz IBM PC. The number for Inboard 386 indicates that access to the memory on the Inboard 386 is very fast. 3. Effective disk transfer rate for PS/2 is greater because of the 2:1 interleave. The same performance can be achieved with the IBM PC AT or IBM PC AT with Inboard 386 if a low-level format is done to change the interleave from 3:1 to 2:1. 4. MIPS means millions of instructions per second. 5. SI is a function of CPU clock rate. POWER CONSUMPTION The Inboard 386 and its options consume the following amounts of power: þ Inboard 386 with 1M byte of memory: 3.6 amps at +5 volts þ Math Module: 1.1 amps at +5 volts þ Piggyback Option with 2M bytes of memory: .5 amps at +5 volts Removing the 80286 and 80287 from the motherboard reduces the original system power consumption by .8 amps. NOTE: Any half-sized card that shares the slot with the Piggyback memory card will consume less than a full card's power. Also, many expansion cards don't use their full allocation of power. WAIT STATES A wait state is an extra timing cycle that a faster CPU uses to synchronize with slower memory. The Inboard 386 uses the following number of 16-MHz, 32-bit wait states: þ For accessing the cache: 0 wait states þ For accessing memory on Inboard 386 and the Piggyback Option: 2 wait states þ For accessing other system memory: 8 to 9 wait states ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ End of file Intel FaxBack # 2010 June 25,1992