======================================================================
  Microsoft(R) Product Support Services Application Note (Text File)
                FW0983: FOXPRO ERROR MESSAGES HELP FILE
======================================================================
                                                   Revision Date: 2/94
                                                       1 Disk Included

The following information applies to Microsoft FoxPro. See below for
versions.

-----------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY     |
| ACCOMPANY THIS DOCUMENT (collectively referred to as an Application |
| Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER      |
| EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED      |
| WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR       |
| PURPOSE. The user assumes the entire risk as to the accuracy and    |
| the use of this Application Note. This Application Note may be      |
| copied and distributed subject to the following conditions:  1) All |
| text must be copied without modification and all pages must be      |
| included;  2) If software is included, all files on the disk(s)     |
| must be copied without modification (the MS-DOS(R)  utility         |
| diskcopy is appropriate for this purpose);  3) All components of    |
| this Application Note must be distributed together;  and  4) This   |
| Application Note may not be distributed for profit.                 |
|                                                                     |
| Copyright (C) 1994 Microsoft Corporation.  All Rights Reserved.     |
| Microsoft, FoxPro, and MS-DOS are registered trademarks and Windows |
| is a trademark of Microsoft Corporation.                            |
|---------------------------------------------------------------------|

INTRODUCTION
============

The disk enclosed with this Application Note contains a Windows Help
file that describes the error messages and general troubleshooting
procedures for FoxPro versions 2.0, 2.5, 2.5a, and 2.5b for MS-DOS and
FoxPro versions 2.5, 2.5a, and 2.5b for Windows. Error messages for
FoxDoc and the distribution kits are also included.

  NOTE: You must be running Windows version 3.1 in order to use this
  Help file.

To install the Help file
------------------------

1. Insert the enclosed FW0983 disk in your floppy disk drive.

2. At the MS-DOS command prompt, type the following and press ENTER

      copy <drive>:\foxerror.hlp <destination>

   where <drive> is the floppy disk drive containing the FW0983 disk
   and <destination> is the drive and directory that contains your
   FoxPro files. For example, if your FoxPro files are located in the
   FOXPROW directory on drive C and the FW0983 disk is in drive A,
   type the following command:

      copy a:\foxerror.hlp c:\foxprow

3. In Windows Program Manager, select the group window that contains
   your FoxPro icons.

4. From the Program Manager File menu, choose New, select Program
   Item, and then choose OK.

5. In the Description box, type FoxPro Error Messages.

6. In the Command Line box, type

      winhelp.exe <destination>\foxerror.hlp

   where <destination> is the drive and directory that contains your
   FoxPro files (see step 2).

7. Leave the Working Directory box blank, and then choose OK.

   You should now see a FoxPro Error Messages icon.

8. Double-click the FoxPro Error Messages icon to view the Help file.