CLICK & SHOW A UNIQUE "SLIDE SHOW" GENERATOR FOR MICROSOFT WINDOWS Version 1.10 Presented by: Sun Data, Inc. P.O. Box 37197 Albuquerque, NM 87176 (505) 266-7420 Copyrighted @1988,1989 by Sun Data, Inc. 2 TABLE OF CONTENTS Page # DISCLAIMER & LICENSE AGREEMENT 3 INPUT & SUPPORT 5 INTRODUCTION 6 HOW TO USE THE CLICK & SHOW SETUP PROGRAM 8 FILE OPTIONS MENU: 8 NEW OPTION: 8 OPEN OPTION: 8 SAVE OPTION: 8 EXIT OPTION: 8 SETUP OPTIONS MENU: 9 DEFINE TOP SLIDE OPTION: 9 SHOW SLIDE OPTION: 9 EDIT OPTIONS MENU: 9 ADD TA OPTION: 9 MOVE TA OPTION: 10 DELETE TA OPTION: 10 CHANGE TA SLIDE OPTION: 10 BACKGROUND TA SLIDE OPTION: 10 CHANGE TA PRIORITY OPTION: 10 DEL BACKGROUND TA OPTION: 10 IMPORT OPTIONS MENU: 11 GET CLIPBOARD: 11 GET DISK METAFILE: 11 STRETCH SLIDE OPTION: 11 HOW TO USE CLICK & SHOW 13 OPENING NEW SHOWS: 13 EXITING: 13 EXAMPLE SESSION 14 RELEASE NOTES =======================================>> 15 APPENDIX A 16 3 DISCLAIMER & LICENSE AGREEMENT LICENSE AGREEMENT: THIS IS NOT PUBLIC DOMAIN SOFTWARE, HOWEVER IT IS SHAREWARE. YOU ARE FREE TO DOWNLOAD THIS PACKAGE FROM BULLETIN BOARDS WE HAVE PLACED IT ON AND TRY IT OUT FOR A PERIOD OF 30 DAYS BEFORE REGISTERING THE PRODUCT THE WITH US. YOU MAY DISTRIBUTE THE SOFTWARE TO YOUR FRIENDS AND ASSOCIATES BUT ONLY ON CONDITION THAT YOU DO NOT ALTER IT, THAT YOU DISTRIBUTE IT WITH THIS MANUAL, AND THAT YOU DON'T CHARGE ANYONE FOR THE DISTRIBUTION. THIS MEANS YOU MAY NOT EVEN CHARGE FOR THE DISTRIBUTION MEDIA WITHOUT FIRST OBTAINING WRITTEN PERMISSION TO DO SO. YOU ARE FREE TO USE THIS PACKAGE FOR YOUR OWN PERSONAL TRIAL FOR A GRACE PERIOD OF 30 DAYS WITH NO PAYMENT REQUIRED. HOWEVER, IF AFTER THIS GRACE PERIOD YOU DECIDE THAT THIS SOFTWARE IS USEFUL TO YOU, YOU ARE REQUIRED TO FILL IN THE REGISTRATION FORM AT THE BACK OF THIS MANUAL AND SEND IT TO US ALONG WITH THE $25.00 REGISTRATION FEE. YOU MAY REGISTER THIS PACKAGE WITH US AT THE ABOVE PHONE NUMBER. JUST HAVE A VISA/MASTERCARD # HANDY WHEN YOU CALL OR EMAIL US ON COMPUSERVE AT 72617,240. AFTER THIS YOU CAN FREELY USE THE PACKAGE FOR YOUR PERSONAL NEEDS AS YOU SEE FIT. YOU MAY NOT COMMERCIALLY USE OR DISTRIBUTE THIS PACKAGE IN ANY WAY WHATSOEVER WITHOUT FIRST OBTAINING A "LICENSE TO DISTRIBUTE" FROM US. LICENSING THE PRODUCT: AS SOON AS YOU LICENSE THE PRODUCT, WE WILL SEND YOU A VALID LICENSE NUMBER. JUST ENTER THIS INTO THE SYSTEM WHEN IT FIRST STARTS UP AND YOU WON'T BE ASKED FOR IT AGAIN UNLESS YOU ACCIDENTLY DELETE THE LICENSE FILE (SO KEEP YOU LICENSE NUMBER SOMEWHERE). THE SAME LICENSE IS VALID FOR BOTH SHOW AND CLSETUP. YOU ONLY NEED ENTER IT ONCE. PLEASE DON'T GIVE YOUR LICENSE NUMBER AWAY. $25 IS REALLY VERY LITTLE PAY FOR THIS PROGRAM AND THE MORE SUPPORT WE RECIEVE, THE MORE SUPPORT YOU RECIEVE. 4 DISCLAIMER OF SOFTWARE: We do not guarantee this software to do anything for you. However, if you pay us for a license to use the package and then decide within 30 days of payment that you have wasted your money, we will refund your registration fee, but that is all. We are not responsible for any time, money, goods or any other tangible or intangible item you feel you have lost directly or indirectly due to use, performance or lack of performance of this software package. However, we think it is a good package with a wealth of potential uses. Not only that, it's fun to use. If you want hard copy of this manual, at the DOS prompt just type in "type readme.txt > prn" and hit return (don't type the " marks). By The Way: Windows & PC Paint are trademarks of the Microsoft Corporation. Paintbrush Plus for Windows is a trademark of Zsoft, Inc. Draw Plus is a trademark of MicroGrafix, Inc. EGA-16 is a trademark of HDC Corp. 5 INPUT & SUPPORT We welcome your input into the development of this product. Suggestions, complaints, questions and compliments are all readily received. It is only with your input that we can truly develop a product that is useful to a wide range of users. We are especially interested in what parts of the program you feel are clunky and not easily understood or used. We also welcome your letting us know how you are using the system and appreciate receiving example "shows". We can be reached for support at the phone number shown on the front page of this manual, or you can write us at the above address. The fastest method of support is to contact us on Compuserve at 72617,240 (Paul Davidson). You also arrange to pay the licensing fee by contacting as suggested above and provide us with a Visa/Mastercard #. REMEMBER, SHAREWARE WORKS ONLY IF YOU ARE HONEST AND PAY FOR WHAT YOU USE. WE HAVE MANY, MANY HOURS OF WORK IN THIS SYSTEM, PLEASE DON'T STIFF US !! 6 INTRODUCTION Hardware Requirements: Both Click & Show (show.exe) and Click & Show Setup (clsetup.exe) run under Microsoft Windows 2.1 and require a mouse and 640K of memory. We also strongly suggest you have both extended and expanded memory if you will be working with color screens. And of course an 80286 is almost mandatory for all Windows applications. The Click & Show system is a set of two programs used for laying out and then presenting a collection of "slides" or screens in a logical and useful manner. One program, Click & Show Setup (clsetup.exe), is used to design the slide show layout and the "touch areas" (TA's) on each slide, while the Click & Show (show.exe) program is used to "run" the show. In a sense you can think of this system as a mouse driven hypertext system for graphical images. The system is not a slide generator. It takes previously generated slides (more on this in a minute) and allows the designer to put together a "slide show". Click & Show Setup (clsetup.exe) is a program for designing the layout and setup of "slide shows" to be presented by the Click & Show program. For each slide show, you define a starting slide, and then for each slide in the show you can define touch areas (TA's). Each touch area is defined so that it "points" to another slide in the show. During a run, the end user double clicks on a TA and the new slide the TA points to is rapidly displayed. Each slide in the show may also have an associated background touch vector which points to a "default slide". Double clicking on a region not in a touch area will display the default slide. For example, the default slide may be the top slide in the show or perhaps the top slide in this series of slides. This is analogous to returning to a previous menu. Click & Show Setup (clsetup.exe) obtains its slides (or screens) in one of two ways, either from the clipboard or from disk files. Currently we only support bitmaps, but we allow you to get a metafile (from clipboard or disk) and convert it to a bitmap. Slides must be generated by the designer using any one of a number of the drawing programs currently so popular (Draw Plus, Paintbrush Plus, PC Paint). If the drawing program is a Windows app then it will be easy to put these images on the clipboard and import them into Clsetup. Otherwise, an image can be captured with the frame grabber provided with Windows. For more info on using the Frame Grabber utility, see you Windows manual. Finally if the drawing application can store the slide in a Windows bitmap or metafile format, the designer can import the image from disk. The other half of the system is the Click & Show program (show.exe), which presents the collection of "slides", known as a "show", put together by the designer using Clsetup. The end user moves from slide to slide in the show by clicking on the predefined "touch areas" with the mouse. Currently, the only type of slides supported in a show are bitmaps in Microsoft Windows format. Click and Show does not explicitly show the touch areas that are defined via Clsetup. It is assumed that the locations of the touch areas will be obvious from the slides themselves. 7 The system is designed as two separate programs to reduce run time size and speed execution. You may be surprised how fast bitmap images can be loaded from disk (and how large color ones can be). You should be aware that a full screen color bitmap will take up around 84k on you disk and will require a fully loaded machine in order to pass it on the clipboard (you may even need EMS memory to handle it). If you are using the wonderful EGA-16 driver from HDC Corp your color bitmaps will be even larger (112K) because they use 4 color planes in their driver instead of the usual three. Unfortunately, at this time, Click & Show only supports slides that are in a bitmap format. We are working on supporting a number of other image formats (metafiles, TIFF files, MGX, PCX & compressed bitmaps) but this is for a later release. Because of the hardware dependent nature of bitmaps, we recommend that both the design and target "run" machine have the same hardware configuration. You can go between different display adapters, but the results will not be as good. The potential applications for this system are many and with the advent of cheap optical disks, the size of the shows is almost unlimited. One example application would be a collection of maps. The first slide in the show might be a map covering an entire state. Double clicking on a county or city would bring up a corresponding map of greater detail. Double clicking on sections of a city could bring up more detailed maps and so forth. 8 HOW TO USE THE CLICK & SHOW SETUP PROGRAM To start, type "win clsetup" from DOS or double click on clsetup.exe from the Windows executive. Clsetup has four entries on its menu bar: FILE, SETUP, EDIT, and IMPORT. Each entry has its own submenu. FILE OPTIONS MENU: Each slide show has a show file associated with it that stores the TA links and pointers to images. We recommend using the default extension ".shw" for these files. The FILE option is used to access the show files. The FILE option has a submenu with six entries: NEW, OPEN, SAVE, SAVE AS, EXIT, and ABOUT. NEW OPTION: Choose NEW when you want to start work on a slide show that doesn't already exist. This clears memory of data from the slide show you have been working on. Be sure you save (see below) your work before doing a NEW. You don't need to choose NEW if you have just entered the program. OPEN OPTION: Choose OPEN if you want to edit a show that already exists. Be sure to SAVE (see below) your work before doing an OPEN, because the show currently in memory will be overwritten. Choosing OPEN produces a list box and an edit box. The list box shows those files in the current directory having a ".SHW" extent. This is the default extent for slide show files. If your show file name has a different extent, you will have to enter the name into the edit box, otherwise choose a file from the list box by double-clicking on it with the mouse. As soon as you pick a slide show, the first slide in that show will be displayed. SAVE OPTION: Choose SAVE to save your work. Keep in mind that SAVE will overwrite the file that you last OPENed. If you haven't done an OPEN or if you did a NEW after the last OPEN, you will be asked to specify a file name. If you want to save your work to a file other than the one you opened, choose SAVE AS. SAVE AS is the same as SAVE, except that SAVE AS always asks for a file name. It is better if the file names you use for your slide show files end in ".SHW", since this is the default extent used by the program. EXIT OPTION: Choose EXIT to exit the program. Be sure to SAVE your work first. 9 SETUP OPTIONS MENU: The SETUP option has a submenu with two entries: DEFINE TOP SLIDE and SHOW SLIDE. DEFINE TOP SLIDE OPTION: Choose DEFINE TOP SLIDE to pick the first slide in a slide show. This is the first thing you must do when beginning a new show and can only be done for a new slide show ! At this time you cannot change the first slide in an existing show, so choose the first slide carefully. Choosing DEFINE TOP SLIDE produces a list box and an edit box. The list box shows those files in the current directory having a ".BMP" extent. This is the default extent for slide files. If your slide file name has a different extent, you will have to enter the name into the edit box, otherwise choose a file from the list box by double-clicking on it with the mouse. The slide you pick will then appear on the screen. SHOW SLIDE OPTION: Choose SHOW SLIDE to look at another slide in the slide show. A list box will appear showing all the slides in the show. Choose one of the names from the list box. This will cause that slide to appear on the screen, along with all its touch areas. You cannot use this option to look at a slide that is not in the show. To put a slide in the show, it has to be "pointed to" by a touch area on an existing slide (see below). EDIT OPTIONS MENU: The EDIT option is used to add, delete, or change the touch areas on the slide currently being displayed. This option has a submenu with seven options: ADD TA, MOVE TA, DELETE TA, CHANGE TA PRIORITY, CHANGE TA SLIDE, BACKGROUND TA SLIDE, and DEL BACKGROUND TA. TA stands for touch area. A touch area is a rectangular area on the slide that the user has defined to "point" to another slide in the show. When the slide show is run using Click & Show, double-clicking within that rectangle will cause the other slide to be displayed. The first five of these options are mutually exclusive; that is, one and only one of them is always in effect at any given time. The option currently selected is indicated by a check mark. When the program is started, ADD TA is automatically selected. None of these options will do anything unless a slide is displayed. ADD TA OPTION: Choose ADD TA to add touch areas to the current slide. The touch area is indicated by drawing a rectangle with the mouse. Put the mouse cursor at one corner of the rectangle, then depress the mouse button. Then, with the button still depressed, move the mouse cursor to the opposite corner of the rectangle and release the button. After drawing the touch area, you will be asked to name the slide that the touch area "points" to. A list box will appear showing the names of files in the current directory with the ".BMP" extent. Choose a file from the list box or enter a file name using the edit box. The slide you choose need not be one that is already in the show. 10 NOTE: You can have many different TA's pointing to the same slide. However, all touch areas must be rectangular. A non-rectangular TA must be approximated with a collection of smaller rectangular TA's. MOVE TA OPTION: Choose MOVE TA to move touch areas already on the current slide. To move an existing touch area, put the mouse cursor within the touch area you want to move, then depress the mouse button. With the button still depressed, move the mouse cursor (the touch area will follow along with it) to the new location. DELETE TA OPTION: Choose DELETE TA to remove touch areas from the current slide. To delete an existing touch area, put the mouse cursor within the touch area you want to delete, then double-click with the mouse button. You will be asked to verify that you really want to do a delete. CHANGE TA SLIDE OPTION: Choose CHANGE TA SLIDE to change the slides that touch areas point to. To change the slide that an existing touch area points to, select Change TA from the menu and then put the mouse cursor within that touch area, then double-click with the mouse button. A list box will appear showing the names of files in the current directory with the ".BMP" extent. The edit box above the list box shows the slide that the touch area currently points to. If you want to change this, make a selection from the list box or type a new file name into the edit box. BACKGROUND TA SLIDE OPTION: The background of a slide (all the area outside the touch areas) is itself considered to be a touch area. The user doesn't have to draw a rectangle to define its extent, but initially it doesn't "point" to another slide. To make the background touch area point to another slide, choose BACKGROUND TA SLIDE, then choose a slide. This option does not change the "EDIT" mode (i.e. which option is checked in the EDIT submenu). You can also change the slide that a background TA points to by choosing CHANGE TA SLIDE, double-clicking somewhere on the background, then choosing a slide. CHANGE TA PRIORITY OPTION: Choose CHANGE TA PRIORITY to change the relative priority of touch areas on the current slide. "Priority" of touch areas has meaning only when two or more touch areas overlap. As touch areas are added, the new touch area is placed "below" any overlapping touch areas on that slide. To change this resulting priority, simply double-click within the touch area you want to bring to the top. DEL BACKGROUND TA OPTION: Choose DEL BACKGROUND TA to make the background touch area point to nothing again. You will be asked to verify that you really want to do this. This option requires no further action with the mouse, and does not change the EDIT "mode" (i.e. which option is checked in the EDIT submenu). This option has no effect unless you have made the background of the slide point to another slide (see second paragraph under CHANGE TA SLIDE above). 11 IMPORT OPTIONS MENU: The IMPORT option has a submenu with four entries: GET CLIPBOARD, CLEAR CLIPBOARD, GET DISK METAFILE, and STRETCH AND SAVE SLIDE. GET CLIPBOARD: The usual procedure for making a slide for our programs is to use a drawing program to do the drawing, then copy the screen to the clipboard in Windows bitmap or metafile format. You can then go into CLsetup and retrieve the slide from the clipboard by clicking on GET CLIPBOARD. If the clipboard has a metafile, bitmap, or text, it will display it (otherwise you will be told that the clipboard has no useable data). You are then given the option of saving the screen as a bitmap; or if the data you got from the clipboard is a metafile, as either a metafile or bitmap. You will be asked to give the slide a file name. A file name with a ".BMP" extent is recommended for a bitmap; ".WMF" for a metafile. NOTE: If space is a consideration, try to use a metafile format. If you are more concerned with preserving the image in the exact size drawn then use a bitmap. GET DISK METAFILE: You can also get a Windows metafile from the disk and write it back as a bitmap. To do this, click on GET DISK METAFILE and enter the name of the metafile. CLEAR CLIPBOARD does just that. NOTE: When you get a metafile from the clipboard, you will be told the mapping mode with which the metafile was drawn; and if the mapping mode was isotropic or anisotropic, you will also be told the viewport extents. If you are going to save the metafile as a BITMAP, you can ignore this information, but if you save it as a METAFILE, it is a good idea to write it down. This information may be necessary to make the metafile appear as it was originally drawn, and it is NOT written to the disk metafile. On the other hand, when you get a disk metafile you will be asked to supply this information because, as mentioned above, it is not stored in the disk metafile. If you don't know, it won't hurt to guess; if you don't like the results you don't have to save them. We plan to correct this problem in a later version of the programs, when we support the use of metafiles in Click & Show. STRETCH SLIDE OPTION: Choose STRETCH SLIDE to stretch (or compress) a slide (bitmap) so that it fits the maximized screen exactly. Stretching a slide causes the slides dimensions to be adjusted to fit the display adapter's dimensions. This will often distort an image to some extent as extra lines are added (or removed) and the stretch routine (StretchBitBlt) can only guess at what you would like to see. This option pulls up a list box and asks for the name of the slide to STRETCH. It need not be a slide in the current show. After stretching the image to fit the maximized screen and displaying it, you will be asked if you want to save the image in this new form. If you answer yes, it is then written back to disk in this stretched format. Note that this will change your bitmap file, so be sure you have backed it up before stretching it. You may not like the new stretched image and will want to discard it and reinstate the unstretched image. See below for more information on stretching. 12 NOTE: Show and Clsetup are designed to run with a maximized window. Generally, bitmaps produced by your drawing program will not exactly fit the maximized Show or Clsetup screens. If you don't stretch your slides somehow, your slide will either be clipped or will not fill (or both) the maximized Show or Clsetup screens. This often will not be a problem and in fact stretching will often distort your images. You don't have to use STRETCH SLIDE to make your slides fit the maximized screen. You can tell both the Clsetup and Show programs to stretch or compress the slides as they are read in. Both programs will ask the user if he wants to stretch or compress the slides if the program encounters a slide that does not exactly fit the maximized screen. (Whatever the answer given, it will apply to all subsequent slides in the show that don't exactly fit. The program will ask only once for each show.) But unlike using STRETCH SLIDE, answering "yes" will NOT cause the program to write the stretched or compressed slide back to its file. The main disadvantage to stretching the slides as they are read in is that the Show program will run much slower if it has to do this. Alternatively, you can use the STRETCH SLIDE option to stretch your slides to fit the Show and Clsetup maximized screens. The disadvantage in doing this is that your slides may become distorted. Since CLsetup will write the stretched slide back to the file, you should probably make backup copies of your slides before doing this. You can stretch any slide at any time, even if it is not in the current show. If your slides are smaller than the Show and CLsetup maximized screens, another possibility is to simply run Show and CLsetup with smaller screens. This will preserve the original "look" of the slide. 13 HOW TO USE CLICK & SHOW To start, type "win show". Click & Show has four entries in its menu bar: OPEN, TOP, PREVIOUS, and QUIT. There are no submenus. Upon entering the program, there are only two options: OPEN or QUIT. QUIT is for exiting the program. OPEN allows you to start a show. Clicking on OPEN produces a list box showing the files in the current directory ending in ".SHW". This is the default extent for show files. If your show file name has a different extent, you will have to enter the name in the edit box, otherwise choose a file from the list box by double-clicking on it with the mouse. When you choose a show, the first slide in that show will be displayed. At this point you can move among the slides by double-clicking on touch areas on the slides. The touch areas are not explicitly indicated as in the setup program, but should be fairly obvious from the slides themselves. Besides using touch areas to move between slides, you can move to the previous slide or the top slide by using the PREVIOUS or TOP options on the menu bar. (The PREVIOUS option will go to the top slide with the third consecutive PREVIOUS). If the Show program encounters a slide that does not exactly fit the maximized Show screen, it will ask the user if he wants the slides to be stretched or compressed to fit exactly. Whatever the answer given, it will apply to all subsequent slides in the show that don't exactly fit. The program will ask only once for each show. The Show program will not write the stretched/compressed slide back to its file; the slide file remains unaffected in either case. OPENING NEW SHOWS: To open a new show, use OPEN as described above. EXITING: To exit the program, use QUIT. 14 EXAMPLE SESSION Using a drawing program that runs under windows, create the slides that you need for the show. You will need a drawing program that can output to the clipboard in bitmap or metafile format. To get used to using the program we suggest you first just start with Paint, since it comes with windows and produces only small black & white bitmaps. Draw up a couple of slides that you would like to reference each other (to make things easy, they could just be menu screens). After completing all the slides and saving them, start up clsetup.exe and key over to Paint. Now take the first slide and copy it to the clipboard. Then go into Clsetup and use the GET CLIPBOARD option in the IMPORT menu to get the slide from the clipboard. Save the slide with a .BMP extent (if the slide was a metafile, save it as a bitmap). Repeat this process for all the slides you have made in Paint so that you now have all the slides "imported" into clsetup and resident on the disk as bitmaps. After doing this for each slide in the show, select NEW under the FILE menu. Next use the DEFINE TOP SLIDE option in the SETUP menu to define the top slide. Use the mouse to draw rectangles on the slide defining all the touch areas on that slide and when prompted, selected the slide the touch area is to point to. Then use the SHOW SLIDE option in the SETUP menu to call up the other slides in the show. Again, use the mouse to draw rectangles defining the touch areas. If you want to define a background touch area for a slide, use the BACKGROUND TA SLIDE option in the EDIT menu. After defining all touch areas for each slide, your show should be finished if you haven't made any mistakes. If you want to move a touch area, use the MOVE TA option in the EDIT menu. If you want to delete a touch area, use the DELETE TA option. If you want to change the relative priority of two or more overlapping touch areas, use the CHANGE TA PRIORITY option. If you want to change the slide that a TA points to, use the CHANGE TA SLIDE option. If you want to add more touch areas, go back to the ADD TA option. This is also probably a good time to play with the two stretching options. But if you use the Stretch option from the menu, just make sure you have a copy of the image on the disk. You may not like the looks of the stretched image. When you are all done, use the SAVE AS option under the FILE menu. Give the show a file name with a .SHW extent. Then go into Click & Show, select OPEN, and select the new show. The top slide in the show will appear. Switch between slides by double-clicking within the touch areas, or by selecting TOP or PREVIOUS. That's all it takes, enjoy (but remember to register so we won't starve). 15 3-14-89 RELEASE NOTES CLICK & SHOW VERSION 1.10 The new versions (1.1) of Show and Clsetup differ from the old versions in two important ways: 1. A couple of bugs have been removed. 2. The old .SHW files are incompatible with the new. This was due to 1. above. Sorry about that but you'll need to redo any shows you created. However, the slides are still compatabile. There are also a few minor changes to Clsetup: 1. You can now import metafiles from disk and then convert them to bitmaps (so they can be used as slides). 2. There is a new entry in the EDIT menu: BACKGROUND TA SLIDE. This menu item lets you select the slide the "general background" points to for the currently loaded slide. 3. The STRETCH SLIDE option has been moved from the SETUP menu (where it didn't really belong) to the IMPORT menu and renamed STRETCH AND SAVE SLIDE. See manual for more detail. 4. We added a CLEAR CLIPBOARD option to the IMPORT menu. Selecting this option will clear what is loaded on the clipboard. This is in the interest of saving memory. 5. We combined the three CLIPBOARD FORMATS: BITMAP, METAFILE, and TEXT into one option: GET CLIPBOARD. We first try to get a handle to a metafile, if one doesn't exist, we next look for a bitmap and finally for text. 6. We added some Message Boxes and Dialog Boxes here and there to try and "persuade" our users to license the product. We have also added a licsensing feature (see manual for more detail). 7. We changed some of the menu accelerators and mnemonics. 16 APPENDIX A REGISTRATION FORM Registration form for Click & Show System Ver 1.10 Payment of the $25 registration fee for this software entitles the end user to six months of free updates of the product and six months of free technical support (your nickel however). Tech support is currently free via Compuserve 72617,240. Name:____________________________________________________________ Company:_________________________________________________________ Address1:________________________________________________________ Address2:________________________________________________________ City:_____________________________ St:____ Zip: _______________ Phone:______________________________________ Primary Use of the Software: Suggestions for improvement: Please return this form to: Sun Data, Inc P.O. Box 37197 Albuquerque, NM 87176 (505) 266-7420 Or Email us on CompuServ at 72617,240.