5/22/90

  This disk contains the following Windows 3.0 drivers for Video Seven
  V-RAM VGA and VGA 1024i:
       V754016.DRV  - 720 x 540 16 color
       V760016.DRV  - 800 x 600 16 color
       V776816.DRV  - 1024 x 768 16 color (requires 512K)
       V7512256.DRV - 720 x 512 256 color (V-RAM VGA 512K only)

  640 x 480 16- and 256-color drivers ship in the Windows 3.0 package.

  Follow these instructions for installing the drivers.  This example
  loads the 800 x 600 16-color driver.  To install a different
  resolution, substitute the driver file name of the resolution you
  wish to install.  

  If you already have Windows 3.0 installed using the Video Seven driver
  that is supplied with Windows (640 x 480 with 256 colors):

  1.  Copy the V760016.DRV file from the floppy disk into the \SYSTEM
      subdirectory under the directory where you have installed
      Windows 3.0.  (e.g. WIN3\SYSTEM\)

  2.  Using an editor (or the Notepad from within Windows) modify the
      SYSTEM.INI file as follows:
      Change the DISPLAY.DRV= entry under the [Boot] section 
      from:  DISPLAY.DRV=V7VGA.DRV
      to:    DISPLAY.DRV=V760016.DRV

  3.  Check that the following lines appear in the [Boot] section:
      386GRABBER=V7VGA.GR3 (386 machines only) and
      286GRABBER=VGACOLOR.GR2
      Make any modifications as necessary.  (If you had installed
      Windows with the standard VGA driver you need to make these changes.

  4.  Save the SYSTEM.INI file.  Restart Windows from the DOS prompt.
      You are now in the 800 x 600 resolution.

      Repeat the above steps to change resolutions at any time.

  If you do not have Windows 3.0 installed:

  1.  Install Windows 3.0 selecting "Video Seven VGA with 512K" or "VGA",
      depending on your memory configuration, as the display option.

  2.  Follow steps 1 through 4 above to change resolution.