ATI Windows 3.1 Display Disk (VGA) - April 10, 1992 release

========================================================================

For: ATI VGA Wonder, Plus, Integra, XL      (VGA based)

------------------------------------------------------------------------

Copyright (c) 1992, ATI Technologies Inc.
All Rights Reserved

------------------------------------------------------------------------

ATI  Technologies Inc.	reserves all rights with respect to the programs
and drivers supplied.


DISCLAIMER OF WARRANTY:
======================

This software is provided without charge.  This software is provided "as
is".   ATI  makes  no  warranties  of  merchantability  or fitness for a
particular purpose,  either expressed or implied.  ATI (where allowed by
state,	 federal,   or	provincial  law)  assumes  no liability,  either
incidental or consequential arising from use of this product.

------------------------------------------------------------------------

REQUIREMENTS - VGA based ATI products:
=====================================

Various modes  require  different  hardware  and memory. If the driver's
hardware and memory  requirements  are  not met at load time, the driver
will exit to DOS  and  report  an  error.  This error will also occur if
the card's monitor configuration  is  incorrect (i.e. card is configured
for a PS2 monitor and the selected resolution is higher than 640x480).

Please note that mode  65H  (1024x768/16  paged  type) is not supported.
Instead, mode 55H (1024x768/16 planar type) is supported.  V3 VGA Wonder
do not support mode 55H. A V3 VGA Wonder card is identified by having V3
as the first two characters in the ROM version label. If this resolution
is required and you own a  V3  VGA  Wonder,  ATI  has a hardware upgrade
program in place. Please contact ATI Customer Support for details.


------------------------------------------------------------------------

INSTALLATION:
============

All driver files required by Windows are in compressed format. Compressed
files are indentified by having an underscore character  (_)  as the last
character in the filename's  extension.  Setup  will  expand  these files
automatically during the driver installation. These files can be expanded
manually  by  using  the  utility  program  EXPAND.EXE supplied with your
Windows 3.1 package (use  the -r option). These  files  are copied to the
Windows SYSTEM sub-directory.

To Install ATI's Windows 3.1 Drivers:

1)  Setup Windows using  the  Microsoft  VGA  display driver. Insure that
    this setup is working  before  proceeding.

    If you are upgrading from Windows  3.0 to 3.1, set the display driver
    to Microsoft VGA in your current  copy  of Windows 3.0 before running
    the upgrade installation.

2)  Exit Windows.

3)  Change directory (CD) to your Windows directory.

4)  Place the ATI Windows 3.1 Display Driver Disk into drive A (or B).

5)  Type "setup" at the DOS prompt.

6)  Select Display - "Other (Requires disk provided by a hardware manufact.."

7)  Select the desired screen resolution and press Enter. Setup will copy
    files from the diskette into your  Windows directories. Setup may ask
    for some Windows diskettes.  Enter  "A:" (or "B:") so setup continues
    to use the ATI driver disk.

8)  When Setup is complete, type "win" at the MS-DOS prompt to start
    Windows.

------------------------------------------------------------------------

Notes - General:
===============

The ATI driver disk is designed  to  copy  all  available drivers to your
Windows SYSTEM  directory  depending  on  which  type  of ATI product you
own. For example,  if  you  select  any  ATI  VGA   driver, all ATI   VGA
drivers will be copied.  This   method  reduces     the need for Setup to
reuse the ATI driver disk repeatedly for post alternate driver selections.


Notes - VGA based drivers:
=========================

The following drivers contain support for V3 VGA Wonder cards:
. 640x480/256 Small & Large font (512K)
. 800x600/16  Small Font (256K)
. 800x600/256 Small & Large font (512K)

For windowed DOS sessions, it is recommended that you select "High Graphics"
for the MSDOS and DOS  application  PIF files. It is required if you select
the 1024x768/16 color driver.

The following stock Microsoft drivers can be selected:
. VGA  (640x480/16 color)
. SVGA (800x600/16 color) - except the V3 VGA Wonder

------------------------------------------------------------------------

ATI Customer Support:
====================

ATI Customer Support is available Monday through Friday, 9:00am to 5:30pm
EST.

    Phone:  (416) 756-0711
    FAX:    (416) 756-0720
    BBS:    (416) 745-4591  (upto 9600 baud, 8 bits, no parity, 1 stop bit)