PRINT SELECTION FOR APAR - II06079 92/07/14 APAR= II06079 SER= DD DOC INFO APAR - MOUSE , INSTALLATION AND CONFIGURATION INFORMATION ( INFO APAR INFOAPAR OS2 OS/2 2.0 OS2INFOAPAR OS2OTHER ) STAT= INTRAN FESN5NFO000-000 CTID= II0000 ISEV= 4 SB92/06/09 RC CL PD SEV= 4 PE= TYPE= I RCOMP= INFOPCLIB PC LIB INFO ITE RREL= R001 FCOMP= PFREL= F TREL= T ACTION= SEC/INT= DUP/ USPTF= PDPTF= DUPS 0 DW92/06/09 RT SC FT RE PT UP LP PV AP EN FL LC92/07/08 RU92/06/09 CUST INST LVL/SU= FAILING MODULE= FAILING LVL/SU= SYSROUTE OF: RET APAR= PS= COMP OPER ENV= SYSRES= SYSIN= SYSOUT= CPU= RE-IPL= OPTYPE= SPECIAL ACTIVITY= REGRESSION= PRE-SCREEN NO.= RSCP= RS000 ERROR DESCRIPTION: keywords : mouse mice installation config.sys device= device equal statement configuration install r200 OS/2 2.0 Pointing Device Installation Document Version 1.1 ... ... INSTALL YOUR POINTING DEVICE ---------------------------- ... During installation the mouse device driver will attempt to detect your pointing device. If it does you will NOT receive a mouse selection panel during diskette 2. It is highly recommended that you do NOT go into the PM mouse panel to change things if you are not prompted to do so. We are finding out that many customers are messing things up by forcing a different device type then what was detected. A prime example of this is the Logitech series M mouse. This mouse is compatible with the MS serial mouse and will be detected. The mouse panel will read MS Serial Mouse. A lot of customers are then going into the PM panel and choosing Logitech Serial. This choice will add the PCLOGIC.SYS driver which does NOT work for the Logitech series M mouse. ... The bottom line is if you are not prompted for any mouse information leave well enough alone. ... ... ... Mouse PM install panel ---------------------- ... Logitech PS/2 Mouse - PS/2 (tm) Style Pointing Device ... Logitech Serial Mouse (Series M) - PS/2 (tm) Style Pointing Device ... Logitech Serial Mouse (Series C) - Logitech (TM) Serial Mouse ... Logitech Trackman serial mouse - Logitech (TM) Serial Mouse ... ... ... CONFIG.SYS STATEMENTS --------------------- ... For most of the common pointing devices that are out today the OS/2 2.0 CONFIG.SYS line for mouse support is simply. ... DEVICE=C: OS2 MOUSE.SYS ... There are some older Logitech Devices (i.e. Trackman) that are not detectable by MOUSE.SYS. These devices are still supported. ... The CONFIG.SYS lines for undetectable Logitech devices and PC Mouse System Mice are; ... DEVICE=C: OS2 PCLOGIC.SYS SERIAL=COM1 DEVICE=C: OS2 MOUSE.SYS TYPE=PCLOGIC$ ... ... If the device is plugged into COM2 then change the SERIAL= parameter to COM2. ... Note: On an AT bus system a serial mouse will only install on COM1 or COM2, and only if COM1 and COM2 are at the standard I/O addresses and IRQs, 3F8,IRQ4 for COM1 and 2F8,IRQ3 form COM2. ... The following pointing devices have been tested and verified to work. I have also included the CONFIG.SYS statements for each entry. ... ... DEVICE CONFIG.SYS Statements ------ --------------------- IBM PS/2 Mouse DEVICE=C: OS2 MOUSE.SYS ... MS PS/2 Mouse DEVICE=C: OS2 MOUSE.SYS ... MS Serial Mouse DEVICE=C: OS2 MOUSE.SYS ... Kensington Expert PS/2 Mouse DEVICE=C: OS2 MOUSE.SYS (NOTE: This is not the same as the Kensington serial mouse!!!) ... Logitech PS/2 Mouse DEVICE=C: OS2 MOUSE.SYS ... MS Bus Mouse DEVICE=C: OS2 MOUSE.SYS (NOTE: This mouse requires a special card that only works on an AT style bus.) ... MS Inport Mouse DEVICE=C: OS2 MOUSE.SYS (NOTE: This mouse requires a special card that only works on an AT style bus.) ... Logitech Serial Mouse DEVICE=C: OS2 MOUSE.SYS (Series M) ... Logitech Serial Mouse DEVICE=C: OS2 PCLOGIC.SYS SERIAL=COM2 (Series C) DEVICE=C: OS2 MOUSE.SYS TYPE=PCLOGIC$ ... Logitech Trackman DEVICE=C: OS2 PCLOGIC.SYS SERIAL=COM2 serial mouse DEVICE=C: OS2 MOUSE.SYS TYPE=PCLOGIC$ ... PC Mouse Systems DEVICE=C: OS2 PCLOGIC.SYS SERIAL=COM2 serial mouse DEVICE=C: OS2 MOUSE.SYS TYPE=PCLOGIC$ ... Visi-On serial mouse DEVICE=C: OS2 PCLOGIC.SYS SERIAL=COM2 DEVICE=C: OS2 MOUSE.SYS TYPE=PCLOGIC$ . .. ... ... There are hundreds of pointing devices available today. Most of these are Microsoft compatable. If they are 100% MS compatable we support them with the following CONFIG.SYS statement DEVICE=C: OS2 MOUSE.SYS. ... We have found that some devices are not 100% compatible and therefore are not supported. ... The mouse device driver is layered allowing an OEM to easily add support for there pointing device. By writing a small mouse device dependent driver they can get there device to work with OS/2 2.0. Please contact the OEM manufacturer to find out if they provide a device driver for OS/2 2.0. ... An example of an OEM manufacturer that provides OS/2 support is HP. HP provides HILMOU.SYS and NOEXBIOS.SYS device drivers. Below is the instructions for adding support for your HIL mouse. ... HP Mouse ... - Directions for installing an HP mouse 1- Select any mouse during system installation 2- Copy HILMOU.SYS and NOEXBIOS.SYS to C: OS2 (these are supplied by the manufacturer) 3-Modify CONFIG.SYS with the following in the order shown: DEVICE=C: OS2 NOEXBIOS.SYS DEVICE=C: OS2 HILMOU.SYS DEVICE=C: OS2 MOUSE.SYS TYPE=HILMOU$(THIS LINE SHOULD ALREADY BE IN CONFIG.SYS BUT WILL NEED TYPE=... ADDED ) ... ... Customer may also go to his dealer for the diskette which ships with the mouse. Customer may also see COMPUSERV GO HP LOCAL FIX: