ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
º TommySoftware CAD/Draw Version 1.05 (BBS release)

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
³ Installation

In order to install TommySoftware CAD/Draw, you will need at least the files
TBCAD1.ZIP..TBCAD4.ZIP and possibly the files SETUP.BAT and SETUP.TXT included
in TBCAD0.ZIP.

There are two ways to install TommySoftware CAD/Draw:

1. If you have the PATH variable pointing to PKUNZIP (at least version 1.11),
   you can simply copy the files TBCAD?.ZIP and SETUP.* into any directory,
   change the current path to that directory and then type

     SETUP C:

   This will install TommySoftware CAD/Draw in a directory named TSCADRAW on
   the harddisk partition C:. You may enter a different partition than C:,
   but this will result in invalid default settings of TommySoftware CAD/Draw.
   In this case, use the command EDIT > EDIT SEARCH PATHES in order to set the
   pathes correctly. Save the edited pathes using the command EDIT > SETTINGS >
   SAVE AS... in a file named TSCADRAW.MPI in the directory TSCADRAW. They will
   then be loaded automatically each time the program is started.

2. If you do not have PKUNZIP pointed to by the PATH variable, you will have
   to unpack the files on your own. But in this case, before installing,
   please read the file SETUP.TXT, which contains some information about
   TommySoftware CAD/Draw. Then, in order to install, type

     x:\...\PKUNZIP -d TSCAD1.ZIP C:\
     x:\...\PKUNZIP -d TSCAD2.ZIP C:\
     x:\...\PKUNZIP -d TSCAD3.ZIP C:\
     x:\...\PKUNZIP -d TSCAD4.ZIP C:\

   where x:\...\ is the path, where PKUNZIP is located. This will result in
   the same installation as point 1. It might be necessary to type a path in
   front of the ZIP's names, so that PKUNZIP can find them.

   ( If you do not have a PKUNZIP yet, you will surely find one in the Mailbox
     from which you received TommySoftware CAD/Draw. To find it there, search
     for the keywords ARC, ZIP and/or PKWARE. )

Please do ONLY register at your local shareware dealer. He will also answer
your questions concerning TommySoftware CAD/Draw. You can find his address in
the registration form that you can call with the command HELP > REGISTER.

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
³ Support via COMPUSERVE 

Questions concerning the installation and technical questions can be mailed
to TommySoftware via CompuServe 100020,3647. Before sending a mail, you should
download the file TSCDQA.ZIP from the GRAPHICS SUPPORT forum (GO GRAPHS) in
Library Section 5, Paint Programs. This file contains the current Questions-
and-Answers document build on all previous questions. In this location, you
will also get the answers to your own questions. Due to this way of answering,
your mail will be made public when answered! You should keep this in mind when
creating your mail.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++  ATTENTION!                                                              ++
++  The content of this disk may not be altered. The software must not be   ++
++  used or passed on outside the stated country. The software may only be  ++
++  passed on if the price of the diskette copy does not exceed 5.- US$     ++
++  resp. the equivalent value in the local currency. All trademarks must   ++
++  not be used without permission.                                         ++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

As of September 1992