=================================================================
Microsoft Product Support Services ViewNote (Text File)
VW003: USING WINDOWS 3.1 AND NETWORKS
8/92
=================================================================

THE INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT
MAY ACCOMPANY THIS DOCUMENT (collectively referred to as a
ViewNote) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
PARTICULAR PURPOSE. The user assumes the entire risk as to the 
accuracy and the use of this ViewNote. This ViewNote may be 
copied and distributed subject to the following conditions:  1) 
If software is included, all files on the disk(s) must be copied 
without modification (the MS-DOS [R] utility diskcopy is 
appropriate for this purpose);  2) All components of this 
ViewNote must be distributed together;  and  3) This ViewNote 
may not be distributed for profit. 

	Copyright (C) 1992 Microsoft Corporation.  All Rights Reserved.

Microsoft and MS-DOS are registered trademarks, and Windows is a
trademark of Microsoft Corporation.
=================================================================

Summary
-------

ViewNotes are online documents designed to answer questions you
may have about Microsoft Windows-based products. To read this
ViewNote in Microsoft Multimedia Viewer, a program that allows
you to read .MVB files (online Viewer documents), follow the 
instructions below. ViewNotes require Microsoft Windows operating
system version 3.0 or later.

FILES THAT MUST BE DOWNLOADED
-----------------------------

This ViewNote requires the following:

 - VW003.MVB (the ViewNote)
 - VW003.IND (the ViewNote index)
 - MMVIEW.EXE (Microsoft Multimedia Viewer)
 

INSTALLATION
------------

Note: If you already have Microsoft Viewer (MMVIEW.EXE)
installed in your VIEWNOTE directory, skip to step 2.

To install Viewer (MMVIEW.EXE) and the files for this ViewNote
(VW003.MVB and VW003.IND), do the following:

Note: To save hard-disk space, you may prefer to copy this 
ViewNote to a high-density floppy disk and run the ViewNote from 
the floppy disk rather than running the ViewNote from your hard 
disk). If this is the case, copy the MMVIEW.EXE, VW003.MVB,
and VW003.IND files to a floppy disk instead of to your VIEWNOTE
directory. 

1. If you do not have a VIEWNOTE directory set up with 
   MMVIEW.EXE located in the directory, do the following to 
   install a read-only version of Viewer:

   a. Create a directory by choosing Create Directory from the 
      File menu in File Manager, typing "viewnote" (without the
      quotation marks) in the Name box, and choosing the OK 
      button.

   b. Download Viewer (MMVIEW.EXE) from your bulletin board
      service (for example, from the Microsoft Download Service
      [MSDL], OnLine, CompuServe, or GEnie). MMVIEW.EXE can be 
      obtained from the Software/Data Library on CompuServe, 
      OnLine, and GEnie by searching for the word MMVIEW or 
      S13434. Note that MMVIEW.EXE is compressed in the file 
      MMVIEW.ZIP on CompuServe, OnLine, and GEnie. After the file 
      has been downloaded, you must decompress the file using the 
      PKware PKUNZIP utility.
                           
      Viewer can also be downloaded through the MSDL at (206) 
      936-6735. Viewer is located in the Windows 3.1 file area 
      and is in the self-extracting file MMVIEW.EXE. For more 
      information about the MSDL, query on the following words in 
      the Microsoft Knowledge Base:

         MSDL and instructions

2. After you have downloaded MMVIEW.EXE, VW003.MVB, and VW003.IND
   (and decompressed the files if you are using OnLine,
   CompuServe, or GEnie), move MMVIEW.EXE, VW003.MVB, and 
   VW003.IND to your VIEWNOTE directory or floppy disk:

   a. In File Manager, select the files you want to move.
   b. From the File menu, choose Move.
   c. In the To text box, type the path to the VIEWNOTE 
      directory you created in step 1a.
   d. Choose the OK button.

READING THIS VIEWNOTE
---------------------

To read the "Using Windows 3.1 and Networks" ViewNote, 
do the following:

1. After installing Viewer (MMVIEW.EXE), VW003.MVB, and 
   VW003.IND using the instructions above, run Windows 
   File Manager.

2. If you are running "Using Windows 3.1 and Networks" 
   from your hard disk, open the directory where Viewer,
   VW003.MVB, and VW003.IND reside (the VIEWNOTE directory if you
   followed the directions above) and double-click VW003.MVB.
   If you are using a keyboard, select VW003.MVB and press ENTER.

   -or-

   If you are running "Using Windows 3.1 and Networks" from 
   a floppy disk, run MMVIEW.EXE, choose Open from the File menu
   in Viewer, select VW003.MVB, and choose the OK button.

SETTING UP A VIEWER ICON
------------------------

If you set up a Viewer icon, you can run Viewer by choosing the
icon, and then load the ViewNote by choosing Open from the 
File menu in Viewer, and selecting VW003.MVB from the VIEWNOTE
directory. To set up a ViewNote icon, create a program item for
Viewer. For information about creating a program item, see pages 
78-81 of the "Microsoft Windows User's Guide" for Windows version 
3.1 and pages 89-91 of the "Microsoft Windows User's Guide" for 
version 3.0.