ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º UM-III º º º º º º Version 3.60 - Oct 1, 1995 º º º º º º Copyright (C) 1995 by BBS Consultants, Inc. º º All Rights Reserved º º º º º º Voice: (919) 403-9473 º º º º BBS: (919) 383-4905 º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ L I C E N S E ®®®®®®®®®®®®®®®®®®®®®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ The enclosed software program is licensed by BBS Consultants, Inc. to customers for their use only on the terms set forth below. Using the enclosed program indicates your acceptance of these terms. BBS Consultants, Inc. hereby grants you a non-exclusive license to use the enclosed software subject to the terms and restrictions set forth in this Software License Agreement. This software is copyrighted, with all rights reserved. You may not copy or otherwise reproduce any part of the software, except that you may load the software into a computer as an essential step in executing the software on the computer. The original and any back-up copies of the software are to be used only in connection with a single computer. Only one copy of the program may be used at any one time. You may physically transfer the software from one computer to another, provided that the software is used in connection with only one computer at a time and that only one copy of the software is in use at any one time. You may not transfer the software electronically from one computer to another over a network. You may not distribute copies of the software to others. YOU MAY NOT USE, COPY, MODIFY, TRANSFER, SUBLICENSE, RENT, LEASE, CONVEY, TRANSLATE, CONVERT TO ANY PROGRAMMING LANGUAGE OR FORMAT OR DECOMPILE OR DISASSEMBLE THE SOFTWARE OR ANY COPY, MODIFICATION OR MERGED PORTION, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED FOR IN THIS LICENSE. DISCLAIMER: You use this program at YOUR OWN RISK. The author and/or copyright owner and/or reseller assume absolutely no responsibility for damages either direct or indirect that result from the purchaser either using or failing to use this software in any manner. In no case shall the liability of BBS Consultants, Inc. exceed the license fee paid for the right to use this software or one hundred dollars ($100.00), whichever is greater. NOTE: Databases MUST BE converted before using UM III. Do not use until you have run the convert.exe program. ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ S U P P O R T ®®®®®®®®®®®®®®®®®®®®®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ Starting with v3.6, User Manager is owned and supported by BBS Consultants, Inc. Do not assume that any problem or bug you have reported in the past is known to us -- it is not or we would have fixed it. No software is bug free but we do make every effort to fix bugs that are reported to us. To improve the program we need your feedback. What features do you need? What features are useless? What anomalies ("bugs") have you discovered? If you do have a problem or a question you may contact us at 919-403-9473 voice or 919-383-4905 bbs. ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ T A B L E O F C O N T E N T S ®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ Packing List..................................4-6 Distributors....................................6 New Features....................................7 Available Modules...............................8 Command Options..............................9-10 Upgrading from UM v2.x.........................10 Upgrading from UM v3.0 - v3.5..................11 Installing UM3..............................12-13 Operation...................................14-28 New Caller Questions........................14 Membership Records.......................14-17 Options while viewing records........15-16 System Configuration.....................18-24 Configuration Screen.................18-19 Credit Card Information Screen..........20 SysOp Message Information............21-22 Printer Information.....................23 CheckBook Information...................24 Trashcan File...............................25 976 Callers.................................25 Global Access Levels........................26 View & Delete Log File......................26 Fortune Quote Editor........................27 Print Functions.............................28 Logon Levels................................32 Fee Structure for membership................33 Accounting Functions........................34 Needed Textfiles...............................36 4 Database structures.........................37-42 Comment Sheet...............................43-44 ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ P A C K I N G L I S T ®®®®®®®®®®®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ CONVERT.EXE - Conversion program to convert v3.x datafiles to the v3.6 format. EXPIRE??.TXT - Files shown to callers who's accounts are about to expire. For example, EXPIRE30.TXT would be shown to a caller who's account is set to expire in 30 days. NEWUSER.TXT - File shown to callers the first time they call. NONMEMBE.TXT - File shown to non-members on each call. REMINDER.TPG - Program to allow user to send themselves a reminder REMINDER.TXT and it's documentation. RESUME.TXT - File to explain to user how to use the resume feature. TODAY.DBF - Today In History Database TODAY.NDX UM36.HIS - The history file for UM-III. This lists the versions, when a bug was found and corrected, new features added, etc. UM36.KEY - Key File for UM-III. Shipped with USERMAN.TPG Do not ever delete this file. UM-III will not create this file. If this file is missing, UM-III will work in DEMO mode only. USERMAN.TXT - This documentation. It is in plain ASCII format. USERMAN.TPG - The main program file UMEDIT.EXE - DOS program to allow you to run the editor from DOS or over a lan. This program allows you to pack and reindex the database files. NOTE: When used over a lan it will lock out the TBBS UM-III. The callers will pass through UM-III and UM-III can not be used until you exit UMEDIT.EXE. Many functions of UMEDIT are available from the command line. UMEDIT.TPG - TDBS program to edit the membership records, set configuration, etc. 5 ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ P A C K I N G L I S T ®® cont ®®®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ UM-III WILL CREATE THE FOLLOWING FILES: ====================================== CARDENTR.LOG Log file that records each time someone enter the credit card section. DISCONNE.LOG Log file of callers that drop carrier while in the credit card section. USERMAN.CFG Configuration file for UM-III. USERLOG.DBF Main database containing Members information. USERLOG.DBT Memo Field for SysOp's notes on members. USERLOG.NX1 \ USERLOG.NX2 | Indexes for Userlog.dbf. USERLOG.NX3 | USERLOG.NX4 | USERLOG.NX5 | USERLOG.NX6 / FEES.DBF Database containing the fee structure. FREEPASS.TXT Sample file to inform callers there free pass has ended. CHECKS.DBF Database containing the checks for the checkbook. DEPOSITS.DBF Database containing the deposits for the checkbook. REMINDER.DBF Database containing the reminder created by REMINDER.NX1 REMINDER.TPG RESUME.DBF Database containing the Members Resumes. RESUME.NX1 Index for the Resume file. TABS_SID.DBF \ TABS_SID.NX1 |- Database and index used by the TABS system. TABS_SID.NX2 / TRASHCAN.DBF Database containing words to trap in logon names, and bad credit card numbers. TRASHCAN.NX1 Index for Trashcan.dbf. TRASHCAN.NX2 Index for Trashcan.dbf. UMLOG.TXT A textfile that UM3 creates and holds the callers renewal information. This may be deleted as often as you wish. 6 USERBACK.DBF This is a temp file and can be deleted whenever encountered. TEMP.DBF This is another temp file and can be deleted. FORTUNE.DBF If this database is present, it will display a random quote to the caller. TODATE.TXT Audit trail of members joining. 7 ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ F E A T U R E S ®®®®®®®®®®®®®®®®®®®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ UM v3.6 is strictly a bug fix release and adds no new features. It may have features that aren't in the version you're using. It may also show menu entries for unimplemented features. In some previous versions of UMEDIT, the command line switch syntax was different for the .TPG and .EXE versions. They now are the same. Check your batch files and .SDL. Note: Command line switches for UMEDIT always contain a ":" following the command line switch -- eg "/P:". ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ A V A I L A B L E M O D U L E S ®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ There are several modules planed for use with UM-III. Customers who register will be notified when available. -- Order Manager Module - This will allow online sales of software, (coming soon) hardware, or just about anything else you would like to sell. Allows use of credit card orders. Callers can use search words to look up products. -- Caller Reminder Module - Caller can leave him/herself a message to be displayed at a later specified date. Will beep and display the reminder each time the caller calls in, until they delete it. SysOps have the option of leaving him/herself a personal reminder or leaving everyone that calls in a reminder. (For a limited time, REMINDER v3.6 is Included at no additional charge with User Manager v3.6 -- Software Manager Module - Prompts callers (by choice) if they wish to (coming soon) downloads a program as soon as they log on. Excellent for software customers who call in your system periodically for upgrades. With this module, your customers no longer have to look all through your system for upgrades, because the Software Manager module will notify them as soon as they log on if there IS an upgrade. 8 ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ C O M M A N D O P T I O N S ®®®®®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ USERMAN.TPG The first thing you will want to do when you install UM-III is to rename your original menu0000.ctl to menutop.ctl. You can actually rename your menu0000.ctl to whatever you wish, but menutop.ctl makes sense + it works. ***Note: If you are upgrading from a previous version, ignore this step, since you would have already done this. The following will replace the old menu0000.ctl : Menu: 0000 Entry: @AnyUser KEY=^@ TYPE=200 Opt Data=d:\programs\userman\userman /Q Entry: @AnyUser KEY=^@ TYPE=35 Opt Data=0001 End Menu: ------------------------------------------------------------------------------ USERMAN /Q This will make a new caller fill out the new caller questionnaire and ask all callers the questions you are requesting. Also with TBBS version 2.2 will check the trash can file for words listed in the trash can and if found, will disconnect the caller. For example, if the SysOp has the word DOOM in the trash can file, and someone logs in using the alias 'Dr. Doom', the system will disconnect them. -------------------------------------------------------------------------- Other available UM-III functions: UMEDIT /Q To access the editor USERMAN -L /Q To display membership list. This will display all persons with MEMBER = y in the editor. The caller will have the option of checking the name of one member or all of them. 9 ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ C O M M A N D O P T I O N S ® cont ®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ USERMAN -U /Q To display callers names. Same as above but all names both members and non-members are displayed. USERMAN -S /Q To display caller statistics USERMAN -R /Q To allow a caller to read another callers resume, and edit their own resume. USERMAN -K /Q Do a keyword search on callers keyword line USERMAN -C /Q Access Chat mode. If the caller has chat enabled, then the SysOp is paged, otherwise the caller is told that the SysOp is unavailable. USERMAN -T /Q Top ten listing of downloaders, uploaders and callers Suggest you do not display this list to callers until you have had enough callers pass through to fill the lists. Otherwise a TOPTEN error will display. USERMAN -A /Q Allows a caller to enter a credit card entry program to reauthorize membership. This also updates their status per editor functions. USERMAN -9 /Q Allows a caller to call a 976 number and then be able to call the regular BBS number as a member 10 ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ C O M M A N D O P T I O N S ®®®®®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ UMEDIT.EXE AND UMEDIT.TPG UMEDIT /A:XXX Age the UserManager membership table and delete callers more than XXX days old. /P:xxx Age the UserManager membership table and delete callers more than xxx days old and pack the table. Without the "xxx", the table is packed and reindexed but no ageing is performed. /R Reindex. /? Prints a help screen. ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ U P G R A D I N G ®®®®®®®®®®®®®®®®®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ UPGRADING from v2.x of User Manager: ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ If you are currently using v2.x of User Manger, you will first have to convert your records to the v3.0 format before proceeding. 1. Make a sub-directory and copy all of your old User Manger files to it. By doing this, you will have your complete v2.x set up intact in case the conversion does not go according to plan. 2. Copy UM36.EXE to your usermanager sub-directory and type UM36. UM36.EXE is a self extracting archive and you will be warned before it overwrites existing files. You should overwrite the existing files with the exception of any text files that you have customized. 3. Execute the UMCONV23.EXE program. This will convert your v2.x User Manger files to the v3.0 format. 4. Proceed to the next section starting at item #2 to convert the v3.0 files to the v3.6 format. 11 UPGRADING from v3.0 - 3.5 of User Manager: ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ If you are currently using v3.0 through v3.5 of UserManager follow these simple steps. 1. Make a sub-directory and move all of the old User Manager files to it. By doing this, you will have your old User Manager just in case you have problems with setting up UM-III. You will need some of these file to complete the conversion so DO NOT erase them. 2. Add a line in your AUTOEXEC.BAT file with the line SET USERMAN= with the full path to the sub-directory where If User Manager was placed in the D:\Userman directory, then your line would be SET USERMAN=D:\USERMAN. 3. Extract the UM36.EXE self-extracting archive into your User Manager directory. 4. Copy your old *.DBF, *.DBT, *.NX?, *.TXT and USERMAN.KEY over the files with the same name in the directory where you are installing User Manager. 4. Run CONVERT.EXE. This will automatically convert everything for use on the new User Manager. 5. Bring up the BBS and go to UM-III. When you go into UM-III this will create any database files that it needs to operate. This should have you up and running on UM-III. One of the best things you could do would be to take a few minutes and get familiar with all the options/features. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Note: ³ ³Remember, if you have problems with the new UM-III just copy all your ³ ³old files back into your working User Manager directory. This will ³ ³get you running back under your old version. If you are having ³ ³trouble, feel free to call your distributor or call BBS Consultants, ³ ³Inc. directly. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 12 ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ I N S T A L L A T I O N ®®®®®®®®®®®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ Extract UM36.EXE in a directory specifically for UM-III. You will want to edit the text files for your use or delete them if they are not to be used. The use of each text file is listed in the section 'NEEDED TEXTFILES', if there is a text file missing just create one using the name as listed. Once this program is installed immediately install the Type 200 with the -E parameter for SysOp access only and go in and set all the parameters. Start with ystem Configuration by entering the name that the SysOp logs in with in the field at the top of the configuration screen. The rest of the controls indicated are logical. If you select to use an International system, the telephone number field will not force input in the format used in the North America. Go to the ogon Levels for members screen. This should also be logical, the left column contains the information for expired members and the right column contains information for current members. The change in these levels will take effect on a member joining or expiring if Reset Logon Priv's for Callers is set in the ystem Configuration. If you are using a fee structure for members, go to the ee structure for membership menu, you may enter up to 12 different descriptions with costs and the number of days for each. The log file referred to in the iew Log File will be created and updated when callers/members use their credit card to join or renew. A future version of this program will allow you to print each record for these callers/members. When you select embership records you will enter a menu that will allow you to view. edit and delete caller/member records. When in a caller record you can edit or delete. A suggestion would be to try the use of the escape key when moving between records, in some instances it is faster than passing all the way through a record. When you delete a caller/member that record will stay in effect until you

ack the caller file (which will automatically go through the reindexing). When you are ready, use the ^@ call in your main menu to force all callers into completing the registration. Remember that changes do not take place in TDBS until the callers passes through to activate the changes. You can force the caller to pass through after credit card input to automatically give that caller member access. 13 ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ I N S T A L L A T I O N ®®®cont®®®®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ The following is a list of some of the functions that UM-III will turn on when a member joins and turn off when a membership expires in USERLOG.BBS: Minutes Per Call Minutes per 24 hour Calls per 24 hour Privilege Level A1 Flag A2 Flag (K)eep Flag (F)ull Flag (I)nvisible Flag Please let us know if you have any needs or suggestions, we'll do our best to include them. This will be a control program, remember that it will record changes to city and state to the USERLOG.BBS file. This allows callers to change their city and state and NOT have to bug you to do it for them. 14 ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ O P E R A T I O N ®®®®®®®®®®®®®®®®®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ Operation of UM-III is pretty simple. This is a run down on the features/options of UM-III. ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ Û EDIT NEW CALLER QUESTIONS Û ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ This allows you to edit new caller questions. These are questions that will be displayed to new callers when they call the very first time. The questions will appear after they filled out their personal info. You may have up to six (6) questions. Questions 1 - 5 can be questions such as "Where did you hear of this BBS?" The response to these questions will appear in the callers record. The sixth question is a response question such as "Are you over 18 ?" they are then prompted for a Y or N response. The callers responding yes can be printed with function 4 in the print section. ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ Û MEMBERSHIP RECORDS Û ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ This takes you to the menu that will allow you to edit, add, delete, etc all your membership (caller) records. The options under this menu are as following: This is the portion of the program that you will spend most of your time. Edit Membership Records - You can change caller's records, ie whether the caller can page the sysop, has adult access, name, address, member, method of payment, etc. On the next page is an example screen of a membership record: 15 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º UM-III Copyright 1995 BBS Consultants, Inc. º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ (password) (mothers maiden name) (full name) ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Record 7 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Login Name TOM FAULKNER Member Y Tag Nº º Company BBS Consultants, Inc. Chat Allowed Y Res Yº º Address 4116 Sunny Ct. Laston 07/08/95º º Laston

Pack Caller File - Packs callers records all nice and neat. Make sure the system is not loaded heavy. This will slow things down quite a bit while running. It depends on the size of your caller database on how long it will take to pack the database. Rebuild Indexes - Rebuilds any indexes that may have become corrupted. <0> Exit - Takes you back to the main menu. ***You may press ESC at any time to back out of anything. 18 ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ Û SYSTEM CONFIGURATION Û ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ You will want to come to this when you are setting up UM-III. Make sure you pay attention to each question. Depending on how you answer these will determine how your system behaves AND how much information you want of each of your callers. The configuration screen looks like this: ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 1. º SysOp's Login Name TOM FAULKNER º 2. º Default Country for UM-III USA º 3. º Ask for Real Name during logon Y º 4. º Ask for Company Name Y º 5. º Ask for Callers resume during registration N º 6. º Ask For Callers Birth Date Y º 7. º Display number of daily callers N º 8. º Reset Uledit logon Priv's for Expired Callers Y º º º 9. º Set & Remove (K)eep flag for members Y º 10. º Set & Remove (F)ull flag for members N º 11. º Set & Remove (I)nvisible flag for members N º 12. º Allow and use security ID number feature N º 13. º Use Membership Expiration System Y º 14. º Display Newcaller info ONLY to Sysop N º 15. º Do you accept credit cards Y º 16. º Use Trashcan File Check During Logon Y º 17. º Give new callers demo access N º 18. º Display new callers during logon N º 19. º Display credit card notice with Priv > 253 N º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 1. SysOp's Login Name: This should be the person on the system that you want to be notified when credit card information is to be processed. This is normally the System Operator. 2. Country to be used if caller doesn't enter a country. 3. If you wish to ask all new callers for their real name place a 'Y' here. If 'N' is present then the question will not be asked. 4. If you want UM-III to ask new callers for the name of their company place a 'Y' here. 5. If 'Y' is present every new caller will have to fill out a resume after they enter all their personal information. 6. If you want the callers birth date, enter 'Y' here. 19 7. When a person calls, UM-III will display how many people have called before them. If this is a N then "Updating Callers records" will be displayed. 8. If this is a Y (normal) then UM-III will reset the callers settings to what you have set in the logon levels area. 9. Set the Userlog.bbs 'Keep' flag when the caller becomes a member. 10. Set the Userlog.bbs 'Full' flag when the caller becomes a member. 11. Set the Userlog.bbs 'Invisible' flag when the caller becomes a member. If you have this set to 'Y' then the member will not be shown in the userlog. 12. In UM3 you can use what is called "Security ID". This feature allows you to place a "Special Access #" on a mailing label for new callers. When the new caller receives you mailout, they can then type in this number and receive a special access. The access levels are defined in the Fee structure area. 13. Membership expiration system should be set 'Yes' for most systems as setting it to 'No' will make UM-III only be a registration system. In some systems the Sysop will set it to 'No' while the system is free and then turn it on when they start charging for membership. 14. If you have enabled the "Display new callers during logon" option, then setting this to Y will only display this information to the Sysop. Otherwise this is displayed to everyone who calls. 15. If you accept credit cards, enter 'Y' to this, otherwise the system will not accept credit card numbers. 16. The trashcan option will allow you kick off people who login with such names as DR Doom etc. The names you wish trashcaned should be placed in the Trashcan editor from the main menu. 17. Demo access is a free membership classification much like a regular member. The time, levels etc are defined in the fee structure. The main difference between demo access and security level caller is that a new caller is automatically given membership without the security code. 18. Option 18 will display a listing of new callers to the system since the last time you called. This will display a list of new callers to EVERYONE that calls in. (See also option 14) 19. Option 18 will allow the display of the new credit card memberships to callers other than the Sysop. ------------------------------------------------------------------------------ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 1. º Give Net Mail Credits to New Members Y Amount 5.00 º 2. º Display Today in History Y Once a Day Y º 3. º Display Random Fortune Quote N º º Fortune file for non Spec-auth Callers FORTUNE .DBF º º Fortune file for Spec-auth Callers FORSALE .DBF º 4. º Display membership expiration date after Fortune Y º 5. º Use International phone system numbering N º º (1) USA (2) Ansi (yy.mm.dd) º º (3) British (dd/mm/yy) (4) French (dd/mm/yy) º º (5) German (dd.mm.yy) (6) Italian (dd-mm-yy) º 6. º Set date format (1 - 6) 1 º 7. º Change TBBS Expiration date to UM-III Exp Date N º 8. º Use Logon Quiz for free access to non-members N º 9. º Give instant access with approved card Y º 10. º Ask for mothers maiden name for Card verification N º 11. º Allow VISA card Y Allow MasterCard Y º º Allow AE/Optima N Allow Discover card N º 12. º Sysop defined credit card º º Sysop defined credit card º º º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 1. Give new members Net-Mail credits of amount specified. 2. Display today in history events if file HISTORY.DBF is present and show every call or just the first call of the day. 3. Display a random fortune ("cookie") if the files specified exist. 4. UM-III allows you to display the callers membership expiration date every time they go through the UM-III. 5. If you use international phone system numbering, UM will not add hyphens to the number. 6. Specify the date format. 7. This will apply the expiration date set in UM-III to the TBBS Userlog.bbs expiration date. RECOMMEND YOU KEEP THIS SET TO N. If the expiration date in Userlog.bbs expires, then TBBS will log the caller off as soon as the caller logs in. Callers will NOT be able to log in and renew and you will lose customers. This function is considered obsolete and may not be in future versions. 8. Callers have to know the answers to your logon quiz to gain access. This function is considered obsolete and may not be in future versions. 9. UM-III allows you to either give instant upgrade and access or to delay it until you approve it. With instant access if the card number and expiration pass a verification routine then they are upgraded and can use the BBS. 10. You may now ask a credit card caller to supply their mothers maiden name as a check against other people using their name and credit card. The first time the caller joins your BBS they will be asked their mothers maiden name. The next time they go through the credit card routine, they must supply the same name. 11. In item 4 you should select the types of credit cards you handle. The caller can only use the type of credit card(s) you accept. UM-III will verify that the number is a valid number. However, UM-III can not check to see that the credit card it any good. For example, someone may enter a credit card number that has expired, and UM-III will accept that card because it has no way of knowing that it is a bad card. ***NOTE: If you know of a credit card number that is bad, you can enter that number in the Trashcan file. UM-III will not accept any credit card that matches a number that is in the Trashcan file. 12. In item 4 you may supply the names for 2 additional credit cards. This is mainly used overseas where they have different cards. *** WARNING *** If you place anything in these areas it TURNS OFF ALL CREDIT CARD VERIFICATION, since we can't be sure of the algorithm used. It is seriously recommended you not use this option. 21 ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ************************* ³ ³ SysOp Message Information ³ ³ ************************* ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 1. º Ask new caller to leave a message to sysop N º 2. º TBBS Message area : E-Mail º 3. º Address Message to: SYSOP º 4. º Usered. Mess. Area: LOCAL º 5. º TIMS Outbound Path: C:\TBBS\OUTBOUND º 6. º Special Area Discpt Adult Area A-1 Flag---X---- º 7. º Flag to show caller is under 21 A-1 Flag----X--- º 8. º Label to display with the Fortune Quote º º Downtown BBS Random Quotes º 9. º Line 1 of envelope return address º º Downtown BBS º 10. º Line 2 of envelope return address º º P.O. Box 3079 º 11. º Line 3 of envelope return address º º Durham, NC 27705 º 12. º Line 4 of envelope return address º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 1. You may now require a new caller to leave you a message after they have completed their personal information. If you would like to do this, answer Yes. The text file 'message.txt' MUST be present or this will automatically disable itself. You may tell the new caller anything you wish through this text file. For example: "Now, please leave me a message telling me if you are a current SysOp of a BBS, what you look for most in BBS's, and what is one thing you wish you could find in a BBS but have not been able to find." 2. If you have answered Yes to item 1 - enter the TBBS message area in this field. This is where all the messages from new callers will be placed. 3. If you have answered Yes to item 1 - enter the name of the person (usually the Sysop) in this field. This person is who will receive all the messages from new callers. 4. In the UM-III caller editor, you may now leave a message to the caller you are viewing. Place the TBBS message area in this field. 5. Other applications related to UM-III need to know where your TIMS program places your outgoing messages. Place the path in this field. Modules such as Software Manager uses this option. Additional modules are discussed elsewhere in the documentation. 22 6. In UM-III, you can have a Sysop definable field. Some systems call it Adult Area, some call it Sysop Access. This name will appear in the membership editor with the name you specify here. If you are using the definable field above, place the A-1 flag you are using for this field. Place an X in the location you wish to use. (NOTE:) UM-III will only accept 1 X. If you use more than one, only the first X will be used. 7. You may also wish to set a flag for such things as a restricted teen area. Place the information in this area. 8. If you are using the Fortune Cookie feature, you may place a line of text to be displayed on a line above the first line of the fortune. This may be something like "Downtown BBS Random Quotes" 9. UM-III can print out envelopes on a laser printer. Place your return address in fields 9-12. 23 ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ******************* ³ ³ Printer Information ³ ³ ******************* ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 1. º Printer device (0 for remote printing) LPT 1 º 2. º Form letter row to begin printing 19 º º Form letter column to begin printing 15 º º º º º º º º º º º º º º º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 1. UM-III will need to know which printer port you will be using. If you select LPT0 you will be prompted with another screen from which you may select no printer or a list of terminal types. The terminal type are for printing from a remote location. UMEDIT.EXE can only use LPT1. 2. You may now print letters from within UM-III. This is a very valuable feature. Some SysOps send a form letter to every caller. The form letter contains their logon information (real name, logon name, address, password etc). This information can be placed virtually anywhere on the form. Place the row and column to start printing the logon information in these fields. 24 ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ********************* ³ ³ CheckBook Information ³ ³ ********************* ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ UM-III has a very simple checkbook included within it. It does not do anything special. It is just a simple way of keeping up with your expenses such as telephone bills, equipment, etc. It will also keep up with your membership income. It has 7 SysOp definable checking and deposit codes and descriptions. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 1. º Checking Codes º º Checking Descp xxxxxxxxxx Code x º º Checking Descp xxxxxxxxxx Code x º º Checking Descp xxxxxxxxxx Code x º º Checking Descp xxxxxxxxxx Code x º º Checking Descp xxxxxxxxxx Code x º º Checking Descp xxxxxxxxxx Code x º º Checking Descp xxxxxxxxxx Code x º 2. º Deposit Codes º º Deposit Descp Credit Crd Code C º º Deposit Descp Cash Payee Code A º º Deposit Descp eeeeeeeeee Code e º º Deposit Descp eeeeeeeeee Code e º º Deposit Descp eeeeeeeeee Code e º º Deposit Descp eeeeeeeeee Code e º º Deposit Descp eeeeeeeeee Code º 3. º Deposit Code for Credit Card º 4. º Deposit Code for Cash Payment º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 3. Place the deposit code that will be used with credit card payments here. 4. Place the deposit code that will be used for cash payments here. All "bookkeeping" functions are considered obsolete and may not be in future versions. Especially considering the number and quality of bookkeeping programs on the market today. 25 ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ Û TRASHCAN FILE Û ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ This is where you can add, delete, and/or list words that are in the trashcan file. Add words in the trashcan file that you DO NOT want callers using as their login name. For example, if you added the word 'death' in the trashcan file and a caller tried logging on as 'Mr. Death' the system would automatically log him/her off. This is also where you put in credit card numbers that you know are bad. If you have a credit card number that you know is bad, and put it in the trashcan file, it will reject anyone trying to use that number. This is the Trashcan File Menu: - Exit UM-III Copyright 1995 BBS Consultants, Inc. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º < 1 > Add new word to Trashcan File º º < 2 > Delete word from Trashcan File º º < 3 > List words in Trashcan File º º < 4 > Add new Credit Card No. to Trashcan File º º < 5 > Delete Credit Card No. from Trashcan File º º < 6 > List Credit Card No.s in Trashcan File º º < 0 > Exit º º º º <-- Choice º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 1. This will simply allow you to ADD a word(s) to the Trashcan File. 2. This will simply allow you to DELETE a word(s) from the Trashcan File. 3. By selecting this you will be presented with a list of current words in the Trashcan File. 4. This will simply allow you to ADD a credit card number to the Trashcan File. 5. This will simply allow you to DELETE a credit card number from the Trashcan File. 6. By selecting this you will be presented with a list of current credit card numbers in the Trashcan File. ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ Û 976 CALLERS Û ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ The 976 phone system is almost like a scaled down 900 number. If you have this option set up, a person can call in your BBS (through the 976 #) and they will automatically be charged a set amount of money (let's say $15). This will be billed by the telephone company. The caller then fills out a registration form and automatically upgraded. The system displays the regular phone number to the caller and logs the person off. 26 ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ Û GLOBAL ACCESS LEVELS Û ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ Global access levels work much like the fee structure and the security ID feature. With the global access you may place ten 10-digit numbers with access days, calls per day, priv, level, minutes per call, minutes per day and bytes per day per level. The new caller can (if activated) input their access code or use one of the 10 global levels. A global access number could be given to schools for students to use. Another number could be given to computer stores to give their new modem owners. This feature allows several different ways of giving new callers limited access for a limited period of time. This is a very powerful feature. This is a good way to give new callers a 'free' tour of your system to show them what you have to offer. **NOTE: In order to keep someone from calling your system under different names using the same number, it is recommended that you change the access number periodically. ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ Û LOG FILES Û ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ You can view/delete a log file that keeps track of who joins your BBS using credit cards. This is handy so you know who exactly has used credit cards. A log file is created when a membership has be purchased using a valid credit card. The person listed as SysOp in the UM-III configuration will be notified as soon as he/she logs into the system that there are credit card orders that need to be processed. **How to print credit card sales: 1. Go into UM-III 2. Select Print Functions ('P' from main menu) 3. Select Credit Card Sales ('5' from print menu) It will print out a list of all credit card sales to the printer you have selected in the UM-III configuration. **How to view credit card sales on the screen: 1. Go into UM-III 2. Select Accounting 3. Select View Credit Card Log ('2' from accounting menu) 27 ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ Û QUOTE EDITOR Û ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ You can browse or add quotes. If 'fortune.dbf' is present, a random quote is displayed to each caller as they log in. You may edit (add) quotes. See also screen 3 of the system configuration for a display line to be used with the quote display function. 28 ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ Û PRINT FUNCTIONS Û ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ This allows you to print caller records, new members, new non-members, callers responding to response question, system information, credit card renewals, trashcan file words, and mailing labels. The screens and options for the Print Functions follow. UM-III Copyright 1995 BBS Consultants, Inc. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º 1 º < 1 > Print Caller Records º 2 º < 2 > Print New Members º 3 º < 3 > Print New Non-Member Callers º 4 º < 4 > Print Callers responding to response Quest º 5 º < 5 > Credit Card Sales º 6 º < 6 > Trashcan File Words º 7 º < 7 > Print Mailing Labels / Envelopes º 8 º < 8 > Print New Caller Form Letter º 0 º < 0 > Exit º º 0 <--- º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ***MAKE SURE YOUR PRINTER IS TURNED ON*** 1. When you select 'Print Caller Records' the system will print ALL records - members AND non-members starting at record #1. 2. When you select 'Print New Members' the system will ask at what record you wish to start from. The system will print all MEMBER records starting from which record you selected. UM-III will print all member records that have never been printed before. For example, if you select this option and select to start from record #1. If you have 500 records and the very last record is a member, UM-III will print through 500. Let's say a month passes by and now you have 750 records with some new members. When you select 'Print New Members' UM-III will start at record #501 and will print until it is through printing all new member records. 29 3. When you select 'Print New Non-Member Callers' the system will ask at what record you wish to start from. The system will print all NON-MEMBER records starting from which record you selected. UM-III will print all non-member records that have never been printed before. For example, if you select this option and select to start from record #1. If you have 500 records and the very last record is a non-member, UM-III will print through 500. Let's say a month passes by and now you have 750 records with some new non-member callers. When you select 'Print New Members' UM-III will start at record #501 and will print until it is through printing all new non-member records. 4. If you have UM-III set up to ask callers a response question, you can at any time select this option to print out a list of responses from new callers. 5. This will print out a list of credit card sales. Information include the name of person joining your BBS, credit card number, expiration date, amount of sale, etc. ***IF there are no current credit card sales and you try to print this, the system will just come back to the Print Functions menu. 6. By selecting this, UM-III will print out a list of all the words (and credit card numbers) that you have entered into the Trashcan File list. 7. When you select this option, you will go to this menu: UM-III Copyright 1995 BBS Consultants, Inc. These functions will move the flag for new callers ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º < 1 > Print New Members º º < 2 > Print New Callers º º < 3 > Print All Members º º < 4 > Print All Callers º º < 5 > Print Tagged Records º º < 6 > Print Test Label º º < 8 > Reset Tagged Records º º < 9 > Reset All Label Flags º º < * > Toggle Envelopes, Labels, Disk file º º < 0 > Abort º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Labels ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ^ |--------This will display either labels, envelopes, or disk file depending on what you have it set for. 30 1. Print New Members - this will print just the new members since the last time you selected this option. 2. Print New Callers - this will print all new callers since the last time you selected this option. 3. Print All Members - this will print ALL members starting with the very first member, no matter when their membership was purchased. 4. Print All Callers - this will print ALL CALLERS - members AND non-members. 5. Print Tagged Records - Now, there is an option to TAG a record as you are browsing through the caller records. If you have previously tagged a record(s), you can select this option to print JUST the tagged records. 6. Print Test Label - if you are about to print out some labels, you will probably want to select this first. By selecting this, UM-III will print a test label to see if you have everything aligned correctly. 7. Reset Tagged Records - If you have tagged some records and you are through printing them, you can remove all the tags by selecting this. 8. Reset All Label Flags - This will reset all records to 'YES' they have been printed. *. Toggle Labels, Envelopes, Disk File - This will toggle between print Labels, Envelopes, and Disk File. The menu itself will look the same, but at the bottom of the menu will notify you which option is currently chosen. If you select 'Disk File' UM-III will write all the information you have chosen to a text file. UM-III will prompt you to input the name of the file that it will write the information to. 8. Print New Caller Form Letter - You may add personal information from UM-III to a form letter that you compose on a preprinted form such as one from Word Perfect for Windows. The print location are setup in the System Configuration section of UM-III. An ascii sample follows showing what you can do with the form letter printing. Downtown BBS Modem: (919) 383-4905 Durham, North Carolina Voice: (919) 403-9473 Downtown BBS is happy to welcome you as one of our new callers. We are consistently upgrading our system with new programs, games and services. Downtown BBS started back in the early 1980's as "Faulkner Supply". It was a small BBS running on a Commodore 64 but was one of the first bulletin board systems in the world. Later as "Triangle Message Base", and finally as "Downtown BBS", Downtown has had callers from over 20 countries and most all 50 states. We welcome not only advice from you. but also your criticism. Do not hesitate to leave a message to the System Operator when you log off. Personal Information: Below is the subscriber information you have provided to Downtown BBS. The information is confidential and will not be distributed to anyone. Please verify the information and indicate any changes to be made. Your real name : xxxxxxxxxxx Um-III will place the Your logon name : xxxxxxxxxxx information in this area Your address : xxxxxxxxxxx if you tell it column 20, Your location : xxxxxxxxxx, xxxx Row 1 Your phone no. : 999 999-9999 Your password : xxxxxxxx Subscription Plan: Subscription plan levels, time periods, and prices are shown on the enclosed rate schedule. Please indicate which level you desire by circling the price for the level and time period of your choice: 3 Month 6 Month 12 Month Level 1: $10.00 $18.00 $30.00 Level 2: $15.00 $26.00 $45.00 Level 3: $20.00 $35.00 $60.00 Level 4: $25.00 $60.00 $99.95 --------------------------------------------------------------------------- Send this form to: Downtown BBS c/o BBS Consultants, Inc. Post Office Box 3079 Durham, North Carolina 27715 Payment Option 1: Credit Card is issued to: Credit Card Number: ________________________________ Expiration Date________ Signature_____________________________________________ ---------------------------------------------------------------------------- Payment Option 2: Payment Enclosed $______________________ 32 ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ Û LOGON LEVELS Û ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ This is where you set up the levels that you want to use for callers. Minutes per call/day, bytes per day, calls per day, privilege level, A1 & A2 flags are all things you can change. In previous versions of UM-3, flags could only be toggled on ("X") and only the first position with an "X" would be toggled. That mean you could toggle A1(3) on when a member joined, but you could not toggle it off. v3.6 fixes that. Now the callers A1 and A2 flags are toggled according to the template specified and you may toggle flags on ("X"), off ("."), or leave unchanged ("-"). Unfortunately, you still can't set flags as part of the fee structure, just registered, member and expired. 33 ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ Û FEE STRUCTURES Û ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ This is where you can set up to 12 different fee levels. You can have each level unique via price, calls per day, minutes per day/call, days the membership last, etc. These levels are what a member will select from. You will also select from this selection when applying a cash payment for a new or renewing member. Also in this section are the level that you wish an expired member to revert to when they expire. The levels that the new callers receive when they input their security ID is here also. Number 15 in this section deals with 976 callers. You would use this when you are using 976 function. Here is the screen you will see when you enter the fee structures: ÉÍÍÍÍÍÍ Pricing Description Price Days CPD PRV MPC MPD BPD Í» º 1.1 YR - 45 Min per day 30.00 365 0 25 30 45 0 º º 2.1 YR - 45 Min/day (Adult area) 40.00 365 0 25 30 45 0 º º 3.1 YR - 90 Min per day 45.00 365 0 25 69 90 0 º º 4.1 YR - 90 Min/day (Adult area) 55.00 365 0 25 60 90 0 º º 5.1 YR -120 Min per day 60.00 365 0 25 90 120 0 º º 6.1 YR -120 Min/day (Adult area) 70.00 365 0 25 90 120 0 º º 7.1 YR - No Limits 99.95 365 0 25 0 0 0 º º 8.1 YR - No Limits (Adult area) 110.00 365 0 25 0 0 0 º º 9. 0.00 0 0 0 0 0 0 º º10. 0.00 0 0 0 0 0 0 º º11. 0.00 0 0 0 0 0 0 º º12. 0.00 0 0 0 0 0 0 º º13.Expired Members 0.00 365 0 25 20 25 1 º º14.Security ID Callers 12.00 30 0 25 30 45 0 º º15.976 call charges 0.00 30 0 25 30 45 0 º º16.Quiz Winner Privilege Level 0.00 30 0 25 30 45 0 º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Edit which field <1-15> 0 You can have UP TO (15) different levels. The above is an example of how to set this section up. Below is a list of what each section means: * Pricing Description - This is just a description of the type of membership. * Price - The charge for each level. * Days - Number of days each membership is good for. * CPD - Call Per Day (# of calls a person can make in a 24-hour period) * PRV - Privilege Level * MPC - Minutes Per Call (# of minutes a caller is allowed during a call) * MPD - Minutes Per Day (total # of minutes a caller is allowed for within a 24-hour period) * BPD - Bytes Per Day (this is the download limit) 34 ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ Û ACCOUNTING FUNCTIONS Û ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ This will display or print your membership totals by month or by year. Great if you want to keep up with how much your system brought in during a certain length of time. You may select any length of time, starting from whatever month and/or year you wish. Here is the Accounting Functions screen: - Exit UM-III Ver 3.6 Copyright 1995 BBS Consultants, Inc. TDBS Version 1.2.4 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º < 1 > View Membership Totals º º < 2 > View Credit Card Log º º < 3 > Accounting º º < 4 > List Monthly Membership Totals º º < 5 > Print Monthly Membership Totals º º < 6 > List Yearly Membership Totals º º < 7 > Print Yearly Membership Totals º º < 8 > Zero Membership Totals º º < 0 > Exit º º º º 0 <--- º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 1. This will take you to a screen that looks like the one below: ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º UM-III Copyright 1995 BBS Consultants, Inc. º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÉÍÍÍÍÍÍ Pricing Description Price Number Amount ÍÍÍÍÍÍ» º º º 1.1 YR - 45 Min per day 30.00 11 330.00 º º 2.1 YR - 45 Min/day (Adult area) 40.00 3 120.00 º º 3.1 YR - 90 Min per day 45.00 6 270.00 º º 4.1 YR - 90 Min/day (Adult area) 55.00 2 110.00 º º 5.1 YR -120 Min per day 60.00 3 180.00 º º 6.1 YR -120 Min/day (Adult area) 70.00 2 140.00 º º 7.1 YR - No Limits 99.95 4 399.80 º º 8.1 YR - No Limits (Adult area) 110.00 1 110.00 º º 9. 0.00 0 0.00 º º10. 0.00 0 0.00 º º11. 0.00 0 0.00 º º12. 0.00 0 0.00 1,659.80 º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 35 Um-III will ask you from what date to start and what date to end the totaling of your memberships. It will then proceed to automatically total all money made on memberships and list how many of each level was sold. ----------------------------------------------------------------------------- 2. If there is a credit card log present, it will list all persons who have purchased memberships with a credit card. It will display information such as name, amount purchased, and credit card number & expiration date. If no credit card sales have been made, the Accounting Functions screen will come back up. 3. If you go to Accounting, a new menu will be shown. - Exit UM-III Copyright 1995 BBS Consultants, Inc. ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º < 1 > Browse Check Register º º < 2 > Edit Checks º º < 3 > Add Check º º < 4 > Browse Deposits º º < 5 > Edit Deposits º º < 6 > Add Deposits º º Exit º º º º 0 <--- º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 1. Browse Check Register - This will display all checks you have written and entered into UM-III. 2. Edit Checks - This will allow you to edit checks that are present in the register. 3. Add Check - This will allow you to add a check to the register. 4. Browse Deposits - Allows you to look at deposits you have entered into Um-III. 5. Edit Deposits - Allows you to edit any deposit you have entered into Um-III. 6. Add Deposits - This allows you to enter deposits into Um-III. ---------------------------------------------------------------------------- 4. This will LIST membership totals by month. 5. This will PRINT membership totals by month. 6. This will LIST membership totals by year. 7. This will PRINT membership totals by year. 8. This will zero the membership totals for all of your callers, thus resetting the membership totals for the above listings. Mainly used at the beginning of the year. 36 ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ N E E D E D T E X T F I L E S ®®®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ The text files needed are as follows: Expire00.txt Text file explaining that the callers membership has expired. Expire01.txt Text file explaining that the callers membership expires in 1 day. Expire02.txt Text file explaining that the callers membership expires in 2 days. Expire03.txt Text file explaining that the callers membership expires in 3 days. Expire04.txt Text file explaining that the callers membership expires in 4 days. Expire05.txt Text file explaining that the callers membership expires in 5 days. Expire06.txt Text file explaining that the callers membership expires in 6 days. Expire07.txt Text file explaining that the callers membership expires in 7 days. Expire14.txt Text file explaining that the callers membership expires in 14 days. Expire21.txt Text file explaining that the callers membership expires in 21 days. Expire30.txt Text file explaining that the callers membership expires in 30 days. Newuser.txt Displayed to new caller before registration. Nonmembe.txt Displayed to non-members every time they call. Resume.txt Displayed to new caller before filling out resume. Keyword.txt Displayed to caller before keyword search begins. Keyword.tx1 Displayed to caller during logon before they enter their keywords. Freepass.txt Displayed to callers that are given a free ride on the first call. Displayed on their second call. Message.txt Text file to display to a new caller before they are to enter the message to the Sysop. The absence of any of the above text files disables, with the exception of keyword.tx1, will disable that function. 976call.txt Displayed to a 976 caller before they register. It may say "disconnect now", you are about to fill out the registration form etc. 976disc.txt Displayed to a 976 caller before the system disconnects them. This should be used to inform the caller as to what telephone number that they should now call. The distribution file UM36.EXE contains samples for some of these files. 37 ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ S T R U C T U R E S ®®®®®®®®®®®®®®®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ ------ UM-III USERLOG.DBF This database holds the information about each user. Structure for database: Userlog.dbf Number of data records: Varies Field Name Type Width Dec NOTES Memo 10 <- Sysop notes REALNAME Character 33 <- Callers Real Name NAME Character 33 <- Login Name per Userlog.bbs COMPANY Character 33 <- Company ADDRESS1 Character 33 <- First line of address ADDRESS2 Character 33 <- Second line of address CITY Character 20 <- City STATE Character 15 <- State COUNTRY Character 10 <- Country ZIP Character 10 <- Zip PHONE Character 14 <- Phone BIRTHDAY Date 8 <- Birthday PASSWORD Character 8 <- Callers TBBS Password MAIDEN_N Character 25 <- Mothers maiden name (if used) UPDATE Numeric 2 <- Update the caller with which fee SECURITY Character 10 <- Special access code (blank if has been used) MESSAGE Logical 1 <- Not used by UM at present time LOGICAL1 Logical 1 <- Not used by UM at present time LOGICAL2 Logical 1 <- Not used by UM at present time RESPONSE Logical 1 <- Yes if caller answered y to res ques. MEMBER Logical 1 <- Member Y/N CHAT Logical 1 <- Chat Allowed Y/N KEEP Logical 1 <- Userlog.bbs Keep Y/N CUSTOMER Logical 1 <- If Ordrmngr is present - Customer Y/N SPECIAL Logical 1 <- Sysop Defined Area Y/N INVISIBLE Logical 1 <- Userlog.bbs Invisible Y/N FULL Logical 1 <- Userlog.bbs Full Y/N REMINDER Logical 1 <- Reminder waiting Y/N FREEPASS Logical 1 <- Yes if on free pass LABEL Logical 1 <- Yes if label has been printed TAG Logical 1 <- Yes if tagged for printing FIRSTON Date 8 <- Date First logged in LASTON Date 8 <- Date Last logged in TIME Character 8 <- Time last logged in LINE Character 2 <- Line last logged in DOWNLOAD Numeric 12 <- Download bytes per Userlog.bbs UPLOAD Numeric 12 <- Upload bytes per Userlog.bbs CALLS Numeric 12 <- Times called per Userlog.bbs AMOUNT Numeric 6 2 <- Membership dues (Note Field) DUE_DATE Date 8 <- Membership expiration date 38 CARD_NAME Character 20 <- Name on Credit card CARD_TYPE Character 4 <- Credit card type CARD_NO Character 20 <- Credit card number AUTHORIZE Character 20 <- Authorization card from credit co CARD_DATE Character 5 <- Credit card expiration date RENEWAL Date 8 <- Date last renewed RENEW_AMT Numeric 6 2 <- Amount last paid for renewal CUSTOM1 Character 30 <- Reply to question 1 CUSTOM2 Character 30 <- Reply to question 2 CUSTOM3 Character 30 <- Reply to question 3 CUSTOM4 Character 30 <- Reply to question 4 CUSTOM5 Character 30 <- Reply to question 5 KEYWORD Character 79 <- Keyword search line ** Total ** 696 INDEXES Index On Upper(Name) To Userlog.nx1 Index On Download To Userlog.nx2 Index On Upload To Userlog.nx3 Index On Calls To Userlog.nx4 Index On Phone To Userlog.nx5 Index On Firston To Userlog.nx6 39 ------------------------------------------------------------------------- This database is updated when a person renews themselves or the SysOp accepts cash payment Structure for database: Todate.dbf Number of data records: Varies Field Name Type Width Dec DATE Date 8 <- Date caller renewed TYPE Numeric 2 <- Fee structure used for update NAME Character 33 <- Callers name LOCATION Character 30 <- Callers location AMOUNT Numeric 6 2 <- Amount of renewal CARD_TYPE Character 4 <- Credit Card type CARD_NO Character 20 <- Credit Card number CARD_DATE Character 5 <- Credit Card expiration date ** Total ** 109 -------------------------------------------------------------------------- This database hold the fee structure. This database will be 12 records, with each record holding 1 period. Structure for database: Fees.dbf Number of data records: 12 Field Name Type Width Dec DESCRIPT Character 30 <- Descriptive line shown to caller PRICE Numeric 7 2 <- Price for this period DAYS Numeric 4 <- Length of time for this period CALLS Numeric 3 <- Number of calls per day PRIVL Numeric 3 <- Priv level for this period MINUTES Numeric 5 <- Minutes per call DAY_BYTES Numeric 8 <- Bytes per day allowed MIN_DAY Numeric 5 <- Minutes per day B_TITLE Character 30 <- Descriptive line shown to caller for billing class B_PRICE Numeric 7 2 <- Price for this class B_HOURS Numeric 3 <- Hours for this class B_MINUTES Numeric 2 <- Minutes for this class ** Total ** 108 -------------------------------------------------------------------------- 40 This is the UM-III configuration file. Each record will do something different. RECORD 1: Structure for database: Nusercfg.dbf Number of data records: 6 Field Name Type Width Dec MEMBER Logical 1 <- If True go through Membership system EXPIRE Logical 1 <- If True, display newcall info to Sysop SIX_MONTH Numeric 6 2 YEARLY Numeric 6 2 CREDIT Logical 1 <- If true, accept credit cards COMMENTS Logical 1 <- If True, ask for resume CUSTOM1 Character 78 <- Newuser question 1 CUSTOM2 Character 78 <- Newuser question 2 CUSTOM3 Character 78 <- Newuser question 3 CUSTOM4 Character 78 <- Newuser question 4 CUSTOM5 Character 78 <- Newuser question 5 ** Total ** 407 *********************************************************************** RECORD 2: Structure for database: Nusercfg.dbf Number of data records: 6 Field Name Type Width Dec MEMBER Logical 1 <- Use international phone numbers EXPIRE Logical 1 <- Use Trashcan File SIX_MONTH Numeric 6 2 YEARLY Numeric 6 2 CREDIT Logical 1 <- Visa Card Accepted COMMENTS Logical 1 <- Mastercard Accepted CUSTOM1 Character 78 CUSTOM2 Character 78 CUSTOM3 Character 78 <- See Below CUSTOM4 Character 78 <- 1-30 Sysops name CUSTOM5 Character 78 ** Total ** 407 CUSTOM1: 1- 8 MA1 expire 9-16 ma1 regis 17-19 uprivl 20-22 nprivl 23 Printer Number CUSTOM3: 1 Stores Userlog.bbs "Keep" To Userman 2 Stores Userlog.bbs "Full" To Userman 3 Stores Userlog.bbs "Invisible" To Userman 5 If True show "You are caller number" CUSTOM4: 1-30 SYSOP's name 31-32 sp 33-40 date 41-48 Number of Next call *********************************************************************** 41 RECORD 3: Structure for database: Nusercfg.dbf Number of data records: 6 Field Field Name Type Width Dec 1 MEMBER Logical 1 <- Ask for callers Birthday 2 EXPIRE Logical 1 <- Ask for callers real name 3 SIX_MONTH Numeric 6 2 4 YEARLY Numeric 6 2 5 CREDIT Logical 1 <- American Express accepted 6 COMMENTS Logical 1 <- Discover card accepted 7 CUSTOM1 Character 78 8 CUSTOM2 Character 78 9 CUSTOM3 Character 78 10 CUSTOM4 Character 78 11 CUSTOM5 Character 78 ** Total ** 407 *********************************************************************** RECORD 4: Structure for database: Nusercfg.dbf Number of data records: 6 Field Field Name Type Width Dec 1 MEMBER Logical 1 2 EXPIRE Logical 1 3 SIX_MONTH Numeric 6 2 4 YEARLY Numeric 6 2 5 CREDIT Logical 1 <- Register caller on 1st call 6 COMMENTS Logical 1 7 CUSTOM1 Character 78 8 CUSTOM2 Character 78 9 CUSTOM3 Character 78 10 CUSTOM4 Character 78 11 CUSTOM5 Character 78 ** Total ** 407 *********************************************************************** RECORD 5: Structure for database: Nusercfg.dbf Number of data records: 6 Field Field Name Type Width Dec 1 MEMBER Logical 1 <- 2 EXPIRE Logical 1 <- If True sets TBBS Userlog expire date 3 SIX_MONTH Numeric 6 2 4 YEARLY Numeric 6 2 5 CREDIT Logical 1 6 COMMENTS Logical 1 7 CUSTOM1 Character 78 8 CUSTOM2 Character 78 9 CUSTOM3 Character 78 10 CUSTOM4 Character 78 11 CUSTOM5 Character 78 ** Total ** 407 *********************************************************************** 42 RECORD 6: Structure for database: Nusercfg.dbf Number of data records: 6 Field Field Name Type Width Dec 1 MEMBER Logical 1 <- Ask for company name 2 EXPIRE Logical 1 3 SIX_MONTH Numeric 6 2 4 YEARLY Numeric 6 2 5 CREDIT Logical 1 6 COMMENTS Logical 1 7 CUSTOM1 Character 78 <- Newuser Response Question 8 CUSTOM2 Character 78 <- See below 9 CUSTOM3 Character 78 10 CUSTOM4 Character 78 11 CUSTOM5 Character 78 ** Total ** 40 CUSTOM2: 1-32 TIMS Outbound Path (For Usersoft) 33-48 Special authority name 49 Which A- flag for special authority flag 50-57 Flag in the format of ---X---- NOTE: I certainly discourage anyone from writing a program that uses this structure and can guarantee that it will change in future releases. 43 ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· º¯¯¯ C O M M E N T S H E E T ®®®®®®®®®®®®º ÓÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĽ UM-III V3.6 Suggestions, Questions and Complaints Form ***If you are reporting bugs within the program, please write down a brief description of what you were doing, the line number it gives you, and the error message.*** Send To: BBS Consultants, Inc. ATTN: UM36 Bug Report P.O. Box 3079 Durham, NC 27715 Name: __________________________________________________ Company: __________________________________________________ Address: __________________________________________________ __________________________________________________ City: __________________________ Province/State: ________ Country: ___________________ Postal/Zip Code: ____________ Phone Number(voice): (______)__________________ BBS Name: _________________________________________________ Phone Number(data): (______)___________________ Place Where 'User Manager' Was Purchased? _________________ Comments: _________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________