--------------------------------------------------------------------------
Setup hints for MDOOR/2 1.02 with US Robotics Class 2.0           05-06-95
B.J. Guillot
FidoNet 1:106/400                         InterNet: bjg90783@jetson.uh.edu
--------------------------------------------------------------------------

NOTE: THIS SETUP FILE IS ONLY FOR THE *OS/2* VERSION OF MAINDOOR

Please make sure the following two items are true before proceeding...
(1) Your modem is NOT set to "Auto Answer" mode (REGISTER S0 MUST EQUAL 0)
(2) You have already put all relevant DATA commands for the BBS into NVRAM

Note that, generally, fax (AT+F) commands CANNOT be stored in NVRAM.

Here is the relevant information from MDSETUP ...

[MDSETUP] Modem -> Strings
  Init string #1 ........... ATZ|~AT+FCLASS=2{.0|
  Init string #2 ........... AT+FNR=1,1,1,1|
  Init string #3 ........... AT+FLI="713 555 1212"|
  Force answer string #1 ... AT+FAA=1;A|
  *** Force answer #2 and #3 should be empty ***
  Dial prefix .............. AT+FCLASS=0DT

: atz                      automatically recalls data commands in NVRAM
: +fclass=2.0              enables fax mode--MainDoor escapes "{." to be "."
: +fnr=1,1,1,1             sets your FAX ID, up to 20 characters
: +fli="713 555 1212"      tells modem to let BGFAX know connect speed
: +fclass=0dt              enables data mode operation on outgoing calls
:
: The "at+faa=1;a" causes the modem to answer adaptively, i.e., to auto-
: matically determine whether the incoming call is fax or data and return
: the response to the modem.

P.S... USR's FAX/ARQ light WILL flash when waiting for calls!

Regards,
bgfax author