Panasonic PCMCIA CD_ROM player Model KXL-D720
	(Beta driver, August 9, 1995)


This disk contains files to enable you to use your KXL-D720 CD-ROM Drive 
with Windows 95 in protected mode.  Directions outlined below may help 
if you are unfamiliar with the procedure.

The files on this disk (or what you revived).

  D720MINI.MPD  : A miniport driver for Windows95
  D720.INF              : Setup sequence direction file for Windows95
  README.TXT            : This file

  
[Caution]
These files are Beta version. This driver does not have the capability to 
transfer data at the full 300kbps which the KXL-D720 hardware is capable of. 
This may be due to the Microsoft CD File system, for PCMCIA.

To Set the drive up, follow these instructions:
1. Copy all files to a formatted 3.5" diskette. 
    (probably done already if your reading this)
2. You should be running Windows 95 on your notebook.
3. PCMCIA Services Need to be activated. (Look in control panel of Windows)
4. If you have previously installed the KXL-D720 DOS driver (real mode 
    driver) you should remove it from the system before you install this 
    protected mode driver. Depending on how the KXL-D720 CD-ROM drive was 
    originally installed the removal procedure will vary. Please consult 
    your Operating Instructions for the KXL-D720 for file names.  

5. To remove the statements from to your AUTOEXEC.BAT & CONFIG.SYS files 
    choose run from the Win95 start menu. Type "SYSEDIT" in the command line 
    box. (Any other text editor can also be used).
6. Delete the necessary lines from both the AUTOEXEC.BAT & CONFIG.SYS files 
    and save the changes. 
7. Restart Windows 95
8. There are different ways to accomplish this, this will explain one way 
    to install the protected mode driver.
9. Insert D720 SCSI PCcard and connect the KXL-D720 CDROM player, Turn the 
    Power on !!!!
    Please note that you should have Win 95 32 Bit Socket Services installed 
    on your system also.
10. From the Win 95 control panel , choose add new hardware, follow the "ADD
    NEW HARDWARE WIZARD" instructions.
11. When asked if you want Win 95 to find the hardware , click the radio 
     button NO. 
12. On next screen of the Wizard, scroll to the selection Other Devices, and 
     click Next.
13. Click on the Button "Have Disk" (the driver disk should be in one of your 
     floppy drives) Select that drive, and click "next". 
14. The device KXLC001 will appear in the next Wizard dialog box, select it 
     and click next 2 times then finish.   
15. The drive should appear on the system immediately. (You may have to 
     re-boot on some systems.)

Alternate Method:

Windows 95 Plug & Play driver installation

1. Boot Windows 95 (without the KXL-D720 PC-CARD inserted)

2. Insert the KXL-D720 PC-CARD into the PCMCIA slot
	Windows 95 system will detect a new PC-CARD is inserted,
	and the setup window will appear with the following:

	*Driver from disk provided by hardware manufacturer.
	*Do not install a driver (Windows will not prompt you again).
	*Select from a list of alternate drivers.

3. Select "*Driver from disk provided by hardware manufacturer."

	Windows 95 system requires setup diskette.

4. Insert the setup diskette into drive A.

	Windows 95 system copies the miniport driver and registers the 
	KXL-D720 information to the Plug & Play information.

	Windows 95 system restarts the computer.

5. The additional CD-ROM drive ICON will appear in "My Computer" window, 
	provided the KXL-D720 CD-ROM drive is connected with the PC-CARD to 
	the system and the power is on to the drive while Windows 95 starts 
	up.


Windows 95 is a registered trademark of Microsoft Corporation.