ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛÛÛÛÛÛÛ± ÛÛ± ÛÛ± ÛÛÛÛÛÛÛÛ± ÛÛÛÛÛÛÛÛ± ÛÛ± ÛÛÛÛÛÛÛÛ± ÛÛ± ÛÛ± ÛÛÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛÛÛÛÛÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛ± ÛÛÛÛÛÛÛÛÛ± ÛÛ± ÛÛ± ÛÛÛÛÛÛÛÛ± ÛÛÛÛÛÛÛÛ± ÛÛ± ÛÛÛÛÛÛÛÛ± ÛÛ± ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß ÛÛ±ßßßßßßßßßßßßßßßßßßß - Wagemakers Jan - 1994 1995 - ÛÛ± - Version 2.00 - dKopie : Copy-program for normal and high capacity disks . ( Please, Ignore my poor English .... or read the dutch manual. ) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Although I have spend a lot of time to write dKopie and I have ³ ³ tested dKopie extensively, I can't guarantee that dKopie will be ³ ³ without bugs. Therefore, I do not take responsibility for any ³ ³ damage caused by dKopie. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ I. INTRODUCTION : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1. Why dKopie : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ After I had purchased the excellent program FDFORMAT V1.8, I had a problem with disks that are formatted on an higher capacity with it. Normal copy-programs can't copy this disks. So, I decided to create a copy-program that can copy NORMAL and HIGH CAPACITY disks. After I had programmed dKopie V1.10, I discovered the program 2M. With this excellent program, disks can be formatted on even an higher capacity then FDFORMAT. So, I decided to build 2M-support in dKopie. dKopie V2.00 was born. 2. Something about FDFORMAT : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ FDformat is a disk-formatting-program written by Christoph H. Hochst„tter, (West-)Germany. FDformat is "public-domain" , in other words : free and the broncode is available. With FDformat you can format disks on a higher capacity then DOS. (Max of 1.72Mbytes for a 3«" HD drive !) Before you can read these extended formats, you have to load a little (200 bytes) program (FDREAD) resident in memory. The best way to do this, is by placing FDREAD in the AUTOEXEC.BAT. For more information about FDFORMAT I refer to the textfiles of FDFORMAT. 3. Something about 2M : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 2M is a disk-formatting-program written by Ciriaco Garc¡a de Celis, Spain. 2M is 100% "Card-Ware", in other words : You must send a postcard to Ciriaco Garc¡a de Celis if you keep using 2M. With 2M you can format disks on a higher capacity then DOS and/or FDFORMAT. (Max of 1886Kbytes for a 3«" HD drive !) Before you can read 2M-extended formats, you have to load a little (5 Kbytes) program (2M) resident in memory. The best way to do this, is by placing 2M in the AUTOEXEC.BAT. For more information about 2M I refer to the textfiles of 2M. Remark : From with 2M V3.0 you get also 2MGUI. With 2MGUI you can format disks on even a higher capacity then 2M. dKopie doen't support this 2MGUI-format. (Maybe? in a later version of dKopie.) 4. 2M and FDFORMAT : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Both, 2M and FDFORMAT, are format-programs who can format a disk on a higher capacity then DOS. Both, they need a memory-resident driver to read these extended formats. But, the 2M-driver can NOT read FDFORMAT-disks and FDREAD can NOT read 2M-disks. So, if it is necessary that you can read BOTH, 2M and FDFORMAT, you must load BOTH drivers. (2M & FDREAD). Remark : From with 2M V3.0 you get also 2MDOS. When you make use of 2MDOS, you don't have to load FDREAD. II. REQUIREMENTS : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1. Microprocessor : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ dKopie makes use of the 80286-instructionset. This is the reason why you must have at least a IBM-compatible 80286 computer for dKopie. If you start dKopie on a XT, dKopie will give an error. 2. Graphic card & mouse : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ dKopie makes use of a graphical userfriendly interface. That's why you must have a VGA-card for dKopie. Normally, you must also have a MOUSE (+MOUSEDRIVER) for dKopie. When you don't have a mouse, you can use dKopie via the command-line, but you can't select all the functions. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ When you don't have a mouse, type 'dKopie A:' or 'dKopie B:'. ³ ³ Note, that without a mouse you can't make use of image-files and ³ ³ you can't change the option-buttons. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 3. DOS version : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ I have checked every interrupt that I have used in dKopie. I think that dKopie should work under MS-DOS 3+ or DR-DOS 5+, but this isn't sure because I've not tested dKopie with all these DOS-versions. 4. Memory & Harddisk requirements : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ dKopie can use 2 sorts of memory to storage the disk-information. When you have XMS-memory, dKopie shall use it by preference. When there isn't XMS-memory, dKopie shall use a temporary file "DKOPIE.TMP" on the harddisk as memory. Because XMS is faster then the HARDDISK, it is recommended to use XMS when possible. But, there can be reasons to not use XMS. By example: If you don't have a great amount of XMS-memory, you must swap your disks extensively. (The amount of memory determines the number of disk-swaps) dKopie looks after the dos-variable DKOPIE_XMS. If DKOPIE_XMS has a value of 0 then dKopie shall NOT use XMS-memory. This can be done by placing SET DKOPIE_XMS=0 in the AUTOEXEC.BAT. dKopie shall make by preference the temporary file in the temporary directory. This can be done with the dos-variable TEMP. (Read your DOS-manual for more information.) When the dos-variable TEMP can't be found, dKopie shall make the temporary file in the directory C:\. dKopie makes use of the conventional memory ONLY for the program-code, the help-file and the file-selection-box. When you don't have XMS-memory, you need a harddisk to use dKopie. dKopie can make 'image-files' only on the HARDDISK. So, you need always a harddisk if you want to use image-files. III. USING DKOPIE : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1. The installation : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1.1. Dos : ÄÄÄÄÄÄÄÄÄÄ Copy the 2 files, DKOPIE.EXE and DKOPIE.TXT to the same directory. When dkopie don't recognize your diskstations right, you must define 2 dos-variables. Read the chapter "IMPORTANT INFORMATION" about this. 1.2. Windows : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Copy DKOPIE.EXE, DKOPIE.TXT, DKOPIE.ICO and DKOPIE.PIF to the same directory. Install dKopie in the program-manager. (Read your WINDOWS-manual for more information.) 2. How to start dKopie : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Go to the dKopie directory. Type after the dos-prompt DKOPIE and hit Enter. (For Windows : double-click on the icon ....) 2.1. Error-message : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ When you start dKopie, it shall test your computersystem. When it detects a problem, dKopie shall give an error. - This program doesn't run on a XT .... - Under Windows, this program works only in full screen-mode ! - This program can't work without a VGA-CARD ! - This program works only under DOS 3+ ! - Can't find a mouse ! ==> You can only make use of the command-line. - XMS-memory problem ! ==> The XMS-memorymanager has encountered a problem. - This program need's a harddrive or XMS-Memory ! ==> dKopie can't find XMS-memory or a harddisk. (dKopie assumes that when there isn't a drive C:, there isn't a hard disk) - No 'command'-line options available ! - Probally a Memory-Resident Virus present ==> When dKopie starts, it does a little test after TSR-Viruses. If dKopie encounters a virus, it will give this error. Because dKopie is not a real virusscanner this error can be false. So, please check your system with a serious virrusscanner. If the error is false, you can switch off the virus-scan-option by setting the dos-variable dKopie_Virus to 0. The best way to do this, is by placing DKOPIE_VIRUS=0 in the AUTOEXEC.BAT. 2.2. dKopie is started : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ You will see a screen like this : ÚÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Copy A:³ Copy B:³ Help?³ Quit ³ Xms=...³ A:=...³ B:=...³ 2M = .... ³ ÃÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³A: Ä> ±±³ B: Ä> ±±³ DOS ³ ³ ³ ÃÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÙ ³ ³ ³±± Ä> A:³ ±± Ä> B:³ ³ ³ ÃÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÙ ³ ³ ³<ÄÄÄÄÄÄÄÄ The menu ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ>³<ÄÄÄÄÄÄÄ System Information ÄÄÄÄÄÄÄÄÄ>³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³<ÄÄÄÄÄÄÄ Options ÄÄÄÄÄ>³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ Format ³ Verify ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄ´ ³ ³... ³... ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ System information : You will see here the amount of XMS-memory in Kbytes - if you had set DKOPIE_XMS to 0, you will see 0 Kbytes! The two diskdrives are graphically represented. (+ = High density) You will also see the version-number of the 2Mdriver. (brown = 2M not loaded !) Options : You can change the copy-options here. 3. The menu : ÄÄÄÄÄÄÄÄÄÄÄÄÄ Go with the mouse to a menu-option and press the left mouse-button. (A brown menu-option is a function you can NOT select!) Here are the different options : - Quit : Exit the program. - Help? : This option loads dKopie.txt in memory and shows it to the screen. When dKopie can't find dKopie.txt in the same directory as dKopie.exe then 'Help?' will be brown. (You can't select it.) - DOS : Starts a DOS-SHELL, type "EXIT" to return to dKopie. When dKopie can't find the dos-variable 'COMSPEC' or when 'COMSPEC' is illegal, then this option will be brown. (You can't select it.) - Copy X: : Starts with copying. - X: --> File : Writes a disk to a image-file. These options are brown when you don't have a harddisk. - File --> X: : Writes a image-file back to a disk. These options are brown when you don't have a harddisk. 4. Copying : ÄÄÄÄÄÄÄÄÄÄÄÄ After you have selected this options, you can get one of the following messages. - Insert the source/target-disk in the diskdrive . ==> Change disk and click on OK. - Remove the write-protect tab . - Abnormal bootsector . ==> dKopie uses the information in the bootsector to determine the number of tracks/sector/heads on a disk. When the bootsector is NOT a standard bootsector, dKopie shall copy the disk as a standard DOS-disk. (* 360Kb * 720Kb * 1.2Mb * 1.44Mb) This can be useful to copy special disks. (Example: LINUX boot disk) But, in this situation, it is not 100% sure that you can use the copy. Click on OK to copy the disk as a standard disk. - Sorry , i can't copy this disk . ==> Probally, the disk isn't formatted, so, dKopie can't copy the disk. - Ready with copying the disk .... ==> Click on OK to go back to the menu. Don't forget to check for read/write/format errors! - Ready with copying the disk , Make this disk again ? ==> Click on NO to go back to the menu. Click on YES to make this disk again. (And this without reading the source-disk again.) This option appears only when you have enough (XMS-)memory. WHY ? ...... : If you have enough memory, dKopie can read the whole ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ disk in memory. So, the computer doesn't need the SOURCE-disk again to know what's on it. - Can't open/close read/write the file : ==> Problem with the temporary file. - 2M-STV : no 2M-Driver active : ==> You have ask dKopie to copy 2M-disks. But there isn't a 2M-driver active. - 2M-STV : Not enough XMS-memory : ==> When formatting 2M-disks, this must be done without disk-swaps. dKopie gives this error when it is impossible to do this with the current amount of XMS-memory. When you have a harddisk, dKopie shall use dKopie.tmp as memory. When you don't have a harddisk, dKopie shall cancel the process. - 2M-STV : error reading/writing of 2M specific information : 5. Reading/Writing image-files : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A image-file is a file that contains all the information that's on a disk. With such a file it is possible to construct the whole disk again. There is one limitation, dKopie can NOT make image-files on a diskdrive. First you must select a filename in the filename-selection-box. When dkopie is reading/writing image-files you can also get one of the following messages. - Abnormal bootsector , I can't read/write this disk to a file : ==> dKopie can't make image-files of disks with a abnormal bootsector. - Can't open/close read/write the file : ==> Problem with the image-file. - Ready with reading/writing the disk : 6. Escape ; cancel a function : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ In dKopie you can use the ESC-key to cancel something. But, it is not sure that the computer will respond directly. When you press ESC, the computer will know it, but it can take a little time before the process is canceled. dKopie doesn't use the Scroll-Lock-Key, so, I decided to use the Scroll-Lock-LED as an indicator for the ESC-key. When the Scroll-Lock-LED is on, you don't have to press ESC again! 7. The options-button : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ There are 2 options-button : - Format - Verify When you click with the mouse one one of these buttons, the status of this button - visible under the button - will change. Format : - Always : De target-disk shall always be formatted. - If needed : dKopie checks the bootsector of the target-disk. Then, dKopie determines the format of the target disk. When the target-disk is already formatted at the right format, dKopie will NOT format the target disk again. Verify: - Yes : When dKopie has put some information on the target-disk, it will check this with the information in the memory of the computer. If this check fails, dKopie will indicate this with a little error-box. - No : Do not verify. By changing these options, you can decrease the time necessary to copy a disk, but also the reliability of a copy. IV. IMPORTANT INFORMATION : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1. Technical : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ - Under Windows dKopie works only in FULL-SCREEN mode. - From with dKopie V1.10, dkopie does a little check for TSR-viruses. dKopie does this by looking for 'installation-checks' of a little amount of viruses. When you set the dos-variable dKopie_Virus to 0, dkopie will skip this test. This can be useful when dKopie gives a false alarm. - dKopie can NOT handle 2.88Mb diskdrives. - Normally, you must load FDREAD before you can handle FDFORMAT-disks. dKopie doesn't need FDREAD, FDREAD may or may not be loaded, dKopie can always copy FDFORMAT-disks. - As opposed to FDFORMAT the 2M-driver must always be active to copy 2M-disks. - dKopie can't copy disks with tracks greater then 84. (Illegal bootsector) Normally this isn't a problem because most drives can't handle tracks greater then 82. - dKopie manipulates keyboard-interrupt INT 15h 4Fh. So, special keys as "Ctrl Alt Del, Ctrl Break, ..." won't work. You will not hear a beep when the keyboard-buffer is full. - dKopie is written entirely in ASSEMBLY. I have found a lot of information on programming the VGA-card in the book PC en PS/2 VIDEO SYSTEMEN, Kluwer Technische Boeken. - Before dKopie can copy a disk, it must know the type of your diskdrives. Normally, you can find this by INT 21h,AX=440Dh. But, there is a problem with special software. STACKER, by example, gives via this interrupt a different number when there is a STACKed disk in the drive. So, I was looking after a different way to determine the diskdrive-types. dKopie V1.01 or higher will determine the diskdrive-types directly from your computers CMOS-Setup. But, if there are problems with it, you can set the diskdrive-types for dKopie manually by the dos-variables DKOPIE_A or DKOPIE_B. You can choose the following numbers for DKOPIE_A or DKOPIE_B: - 0 = no diskdrive - 1 = 5¬ dd diskdrive (360Kb) - 2 = 5¬ hd diskdrive (1.2Mb) - 3 = 3« dd diskdrive (720Kb) - 4 = 3« hd diskdrive (1.44Mb) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ When dKopie doesn't recognize your diskdrives right, you must set ³ ³ "DKOPIE_A" or "DKOPIE_B" to the right value. You can do this by ³ ³ putting something like this in the autoexec.bat: SET DKOPIE_A=2 ³ ³ SET DKOPIE_B=3 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 2. Testresults : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ I have tested dKopie extensively on my own computer (386sx 16Mhz ). I haven't found real errors. But read the following remarks: When the XMS-memory-manager encounters a error, you get the error-message "XMS-memory problem". ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ When you get this error on a regular basis, you can try the ³ ³ following. ³ ³ ³ ³ Remove the option HIGHSCAN from EMM386. By releasing this option on ³ ³ mine computer, I had fixed a lot of problems, not only with dKopie, ³ ³ but with a lot of other programs! ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Normally, it isn't a problem to run dKopie under WINDOWS. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ dKopie can only run in full-screen-modus under WINDOWS ! ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Do always use dKopie.pif. You can change dKopie.pif, to suit your own needs. It is recommended to use SHARE.EXE when you use dKopie under windows. Why ? : Read the dutch manual, it is to difficult for me to explain it in English. (Sorry ...) dKopie is written especially for FDFORMAT-V1.8 and 2M-V2.1/3.0. If you use a other extended-format-program, it may or may not work with dKopie. If you have a format-program that is not compatible with dKopie, please, send it to me. I have tested dKopie with the following format-programs : ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Program and ³ 3«HD Max.³ Year of ³ Makers of the PRG ³ ³ version ³ format ³ the PRG ³ ³ ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍØÍÍÍÍÍÍÍÍÍÍØÍÍÍÍÍÍÍÍÍÍØÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵ ³ FDFORMAT V1.8 ³ 1.72M ³ 1991 ³ Christoph Hochst„tter ³ ³ 2M V2.1 ³ 1886K ³ 1994 ³ Ciriaco Garc¡a de Celis ³ ³ 2M V3.0 ³ 1886K ³ 1995 ³ Ciriaco Garc¡a de Celis ³ ³ 800 II V1.40 ³ 1.6M ³ 1989 ³ ALBERTO PASQUALE ³ ³ MAXI V1.6 ³ 1.6M ³ 1990 ³ Herne Data Systems Ltd. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ If you find an error in dKopie, please let me know ! V. THANKS !!!! : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1. Christoph Hochst„tter : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The maker of FDFORMAT & FDREAD. Without FDFORMAT and the clear listings of FDFORMAT/FDREAD dKopie was never borned. 2. Ralf Brown : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ For his great interruptlist-program. (Freeware!) 3. Wagemakers Staf : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ My brother. For his support and for learning me how to program in assembler. 4. Ciriaco Garc¡a de Celis : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The maker of 2M & 2MF. (The best formatter in the world! (Don't forget to send a card to Ciriaco Garc¡a de Celis)) Thanks for the "TECHNICAL INFORMATION" of 2M. 5. Uwe E. Schirm & Dave Walker : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ For the 80xxx Snippets (E. Schirm) and especially CHILD.ASM (Dave Walker) in it. 6. Walter Bleumers : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Coordinator of the HCC (Hobby Computer Club). For putting dKopie V1.01 on a HCC-month-disk. 7. Roland Callewaert : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ He is the first (and only) person who had respond to dKopie. Thanks for the disks with software you had send to me! 8. Jouni Miettunen : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The maker of 2L8 Cursor Editor (mouse-editor). 9. You : ÄÄÄÄÄÄÄÄ For trying out this program.... I hope you like it ! (And if you don't like it, please tell me why !) VI. SOFTWARE-LICENSE : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1. Free : ÄÄÄÄÄÄÄÄÄ dKopie is FREE software, you don't have to pay for it ! Please keep the following rules in mind: - When you give dKopie to someone, you must give all the files. - Don't change any file. - Don't ask money for dKopie ! You may ask a small fee for the transport ... 2. The broncode : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ With dKopie, you have got also the file BRONKODE.EXE (BronKode translated in english is broncode. (Ik gebruik graag de progressieve spelling, vandaar ...) BRONKODE.EXE is a 'LHA-self-extracting-archive'. In BRONKODE.EXE you find all the files needed to make dKopie.exe. You may use the broncode, but please, keep the following rules in mind: - The broncode may only be used for FREEWARE or PUBLIC DOMAIN software. Or in other words, you may not ask any money for that program. (A postcard is not money, so, CARDWARE is o.k.) - You have to place my name in your program. (Something like THANK ... is o.k.) - When you make a little change to dkopie, you must let me know it. - You may also use the broncode to construct a COMPLETELY new copy-program. When I say 'completely', I mean 'completely' ! I do NOT like people who put only there name in my program, that's something that every baby can. Sorry, but the bronKode is only available in the dutch language ! (But that is not a problem, dutch is very easy :) ) VII. NEW IN DKOPIE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Sorry, only available in the dutch manual .... But, he, dKopie V2.00 is the first English version of dKopie, so, this isn't a real problem. VIII. LAST WORDS : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1. Last word : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A computer is a beautiful machine. But, without software, you can't do a thing with it. And software cost money, a lots of money. Money that's better spend to follow the quick evolution of hardware. For this reason dKopie is FREE. But, I have a little problem. Because I don't have a MODEM (yet), I and my computer, we are a littlebit isolated. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ So, I want to ask ; If you find dKopie a useful program, please ³ ³ let me know it by sending something to me (a postcard, a letter, a ³ ³ disk with software, ...). ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 2. Where do I find the last version of dKopie ? : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ This can be a problem. Because I don't have a MODEM, I can't upload dKopie to a BBS. So, I hope that people who have a modem will do that for me. You can become dKopie also directly from me. Please follow the following instructions. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Send a STRONG envelope with a 3«"-disk in it. Put also in the ³ ³ envelope : a label with your name and address and enough stamps to ³ ³ send this envelope back to you. ³ ³ ³ ³ When I have received this envelope, I will send it back, with on ³ ³ the disk the last version of dKopie. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 3. My address : ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ· ³úúúúúú Wagemakers Jan úúúúúúúúúúº ³úúúúúú Wildemansstraat 31 úúúúúúº ³úúúúúú 2550 úúúúú Kontich úúúúúúº ³úúúúúú Belgi‰ - Belgium úúúúúúúúº ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Was free ; Is free ; ALWAYS free ! .... ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ