VEdit 2 v2.15
                                 June 28, 1995

This file contains version 2.15 of the DOS VEDIT2.EXE software.  This 
software will ONLY work with Creative cards.  Additionally, this software
may REQUIRE that you have the DOS low-level drivers installed in the 
CONFIG.SYS with some versions of the DOS drivers for the card.

Please read this ENTIRE file BEFORE using this software.

This software is provided AS IS.  Creative Labs/Creative Technology no 
longer distributes this software with our cards, and it is provided via our 
electronic distribution areas only as a courtesy to users.  Creative no 
longer provides technical support or updates for this software package.

This software is copyright Creative Technology and is licensed for use 
only with Creative sound card products.  (For additional licensing 
information please see the LICENSE.TXT file).

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Contents of this archive:

     CONGA.VOC   - Sample .VOC file
     BBCNEWS.VOC - Sample .VOC file
     LICENSE.TXT - License agreement
     READDRV.EXE - Driver version checking program
     VEDIT2.EXE  - VEdit2 executable

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Installation instructions:

1. You MUST already have the Creative DOS software (including DOS drivers)
   installed.  If you do not have this software installed, please do so
   before proceeding.

2. Check to see if you have a VOCUTIL directory under the main directory 
   that your SB software is installed in.  It should be one of the 
   following:


    For SB 2.0 users \SB\VOCUTIL
    For SB Pro users \SBPRO\VOCUTIL
    For SB 16  users \SB16\VOCUTIL  (This includes AWE and Phone Blaster 
                                     cards.)

    If this directory does not exist, then change into the drive and 
    directory that the SB software is installed into and issue the 
    following command:

         MD VOCUTIL

3.  Copy all of the contents of this archive into the VOCUTIL directory.  
    If you have extracted the files to the \TEMP directory and have a SB 
    Pro card, then the command would be:

         COPY \TEMP\*.* \SBPRO\VOCUTIL

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
NOTE:  Some versions of the DOS drivers for the card (CT-VOICE.DRV, etc.) 
       will REQUIRE that the low-level DOS drivers (CTSB20.SYS, CTSBPRO.SYS 
       or CTSB16.SYS and CTMMSYS.SYS) be installed.  These drivers take up 
       conventional memory, but CAN be loaded high (if you are getting this 
       update off of CompuServe see the DRIVER.TXT file in Lib 14 / Freq. 
       Asked Questions for additional info on these drivers, or consult 
       your manual or the README.TXT file in the directory your SB software 
       is installed in).  

NOTE:  If you have problems getting this package to run, try using the most 
       recent update file available for your card.

NOTE:  Some versions of the DOS drivers may not allow the packing function 
       to work.