OS/2 Warp Connect Driver for AMD AM2100 Network Adapter Series
---------------------------------------------------------------

by Horst B. Simon

Installation instructions based Timothy F. Sipples Quick Start instructions 
for Novell NE2000 compatibles. 

October 6, 1995

Installation
------------

1.  Obtain a blank, formatted diskette and label it "OS/2 Warp Connect
    Driver for AMD AM2100 Adapter Series."

2.  Copy the files in this package (AM2100.OS2 and AM2100.NIF) to
    the diskette.

3.  Install OS/2 Warp Connect.

4.  When prompted for the type of network adapter installed, insert the
    "OS/2 Warp Connect Driver for AMD AM2100 Adapter Series" diskette 
    you have created in Drive A and click on the "Other Adapters" button.  
    Proceed to install the driver from the diskette.

5.  Scroll through the list of network adapters and select "AMD Am2100 
    Adapter Series."

5.  Click on the Settings button and verify that the base I/O port address,
    interrupt (IRQ) and DMA Channel settings match those used by your 
    network adapter. If not, make changes as necessary to either your 
    adapter's own configuration or to OS/2 Warp Connect Settings for the 
    network adapter.
    Press F1 if you need help in setting either value.