---------------------------------------------------------------------- HyperACCESS Pro Beta #2 README File ---------------------------------------------------------------------- Contents ======== o Welcome to the HyperACCESS Pro Beta Test! o Downloading and Uncompressing HyperACCESS Pro Beta #2 o Installation o Reporting Bugs o Known Bugs and Incomplete Features o Draft Copy of Final HyperACCESS Pro README.TXT ----------------------------------------- Welcome to the HyperACCESS Pro Beta Test! ----------------------------------------- Thanks for helping us beta test HyperACCESS Pro, the ultimate OS/2 communications program. In this file you will find important informa- tion about HyperACCESS Pro Beta #2 and bug reporting procedures. HyperACCESS Pro is the exciting new top-of-the-line product from Hilgraeve, the leading manufacturer of OS/2 communications software since 1989, makers of HyperACCESS Lite (which IBM bundles with OS/2 Warp), HyperACCESS, HyperACCESS/5 and KopyKat. HyperACCESS Pro gives you the power to access BBSs, online services and host computers through modems or the Internet, PLUS the ability to remotely control other OS/2 PCs. All perfectly integrated in the clean, award-winning user interface that earned HyperACCESS for OS/2 the title "Best New Communications Program of 1995" from OS/2 Professional. HyperACCESS Pro includes every capability you'll find in HyperACCESS for OS/2, plus new 32-bit remote control powers evolved from the 16- bit remote control technology we pioneered in KopyKat. The rest of this section compares HyperACCESS Pro to HyperACCESS Lite and other Hilgraeve products. Skip to the next section, if you like. Benefits HyperACCESS Pro offers over HyperACCESS Lite: * Now you can see and operate the entire OS/2 desktop of a remote PC. * Answer calls from other PCs with a powerful password-protected host. * Learn and play back logons, file transfers or repetitive operations. * Automate communications processes with REXX or external languages. * See graphics files display on the fly as you download them. * Emulate additional terminals with greater flexibility, including the power to redefine keys, screen colors, and number of rows & columns. * Enjoy more and faster file transfer protocols with more settings. * Supports more modems or works through your existing TCP/IP stack, NetBIOS and SPX/IPX networks, serial cables or multi-port boards. * Comes with one-click utilities that call Govt BBSs and set your PC's time/date to atomic standards or display the latest weather maps. * You also get a list of 300 OS/2 BBSs, preloaded and ready to call! Benefits HyperACCESS Pro offers over HyperACCESS for OS/2: * HyperACCESS Pro now includes HyperHost, a separate program, like host mode in HyperACCESS for OS/2, but more powerful and secure. * Each HyperACCESS Pro retail package will include a second copy of HyperHost, for use on a second OS/2 PC. * HyperHost can be accessed by anyone with communications software and a password, but HyperACCESS Pro users have special powers. * Authorized HyperACCESS Pro users can see and remotely control the OS/2 desktop of HyperHost PCs, and transfer files more quickly. * You can communicate through a wider variety of modems than ever, or through the Internet, or any TCP/IP, NetBIOS or SPX/IPX network. * HyperACCESS Pro will add emulation of IBM3278 terminals, so you can access IBM host computers through asynchronous protocol converters. Benefits HyperACCESS Pro offers over KopyKat: * Assign different access privileges & passwords to each caller. * Improved security with callback, time limits and activity logging. * Now remotely control OS/2 PCs with up to 1280 X 1024 X 16M colors. * You can scale the size of the image of the remote PC's desktop. * Reverse the phone charges by using roving callback. * You and the remote user can chat (using your keyboards). * Automate file transfers using REXX or other programming languages. * Navigate to remote PCs through Internet service providers, PBXs, or other systems that display prompts or login procedures of their own. * Your PC can now answer & differentiate between calls authorized for remote control or unattended file transfer, through the same modem. * Simultaneously transfer files, use remote control and chat, with new cutting-edge 32-bit multi-channel technology that kicks in when you connect between PCs with HyperACCESS Pro, through dial-up, Internet, or TCP/IP, NetBIOS or SPX/IPX networks. (Keep using 16-bit KopyKat for remote control of PCs with OS/2 1.3.) Benefits HyperACCESS Pro offers over HyperACCESS/5: * Full graphical remote control between HyperACCESS Pro PCs. * Supports more modems and works through your existing TCP/IP stack. * Instantly review received text in backscroll buffer that keeps text even between sessions, stored separately for each system you call. * Safer easier HyperProtocol transfers with autostart, crash recovery. * Record or write scripts with REXX or external programming languages. * 32-bit viewer displays graphics files as you download files. ----------------------------------------------------- Downloading and Uncompressing HyperACCESS Pro Beta #2 ----------------------------------------------------- Before you can install HyperACCESS Pro Beta #2, you need to download it from any of many online sites and unzip the program files. Beta #2 is provided as two zip files, HAPB2_D1.ZIP and HAPB2_D2.ZIP. The file you're reading now came from HAPB2_D1.ZIP, so if you're reading this, you probably already unpacked at least that file. But we'll explain the process anyway, in case you got this file some other way. HAPB2_D1.ZIP and HAPB2_D2.ZIP contain the HyperACCESS Pro installation files in compressed format. After you download these files, you need to run them to generate the files necessary to install HyperACCESS Pro. HAPB2_D1.ZIP expands to create Disk #1 of a two-disk set of installation disks, and HAPB2_D2.ZIP expands to create Disk #2. Here's the procedure: 1. Open an OS/2 window, and change to the drive and/or directory containing the downloaded files. 2. Type PKUNZIP HAPB2_D1 , and press ENTER. Replace with the drive and/or directory where you want the HyperACCESS Pro files to be copied. We recommend that the destination be a floppy drive containing a blank, formatted 3-1/2" diskette. That way, you can use this diskette to install the software on each of the PCs you use for testing. Example: PKUNZIP HAPB2_D1 A: 3. Repeat step 2 for the file HAPB2_D2.ZIP. If uncompressing to floppy disks, please label the diskettes as HyperACCESS Pro Disk #1 and Disk #2. 4. Once the files have been copied to the drive or directory, use a text editor to read the README.NOW file in the Disk #1 drive or directory. (That's the file you're reading now!) ------------ Installation ------------ Once you've downloaded and uncompressed HyperACCESS Pro Beta #2, you can install it as described here: Setup Phase I ============= 1. Change to the drive that contains HyperACCESS Pro Disk #1 (or the directory that contains the Disk #1 files). 2. Type SETUP. 3. When asked if you want to install HyperHost also, answer Yes. 4. Specify the directories for the Program and Data files. These may be the same or different location depending on your preferences. Click OK to continue. NOTE: Program files may be installed to a shared network directory that you set to read-only after installation. Data files must be in a writable directory and should not be shared. 5. Select the choice you prefer in the CONFIG.SYS Additions dialog, and click OK. 6. Click Continue after reading the next status message. HyperACCESS Pro files will then be copied to the specified directories. 7. When prompted to do so, insert HyperACCESS Pro Disk #2 (or specify the directory that contains the Disk #2 files). Click OK to continue. 6. Click Continue after reading the next status message to begin Phase II of the installation. Setup Phase II ============== 1. Enter all user information. Click Continue when finished. 2. Select the type of connection you will most often use. Click OK to continue. 3. If you chose "Modem or Modem Pool" as your connection type, select an appropriate modem from the selection list. Click OK to continue. 4. Select the connection type you will use most often. 5. If you chose "Modem or Modem Pool" as your connection type, select the dialing method your phone system uses. Click OK to continue. 6. If you chose "Modem or Modem Pool" as your connection type, enter a dialing prefix if your phone system requires one (such as '9' to get an outside line). Otherwise, leave this field blank. Click OK to continue. 7. Specify your default download and upload directories. If you leave these field blank, whichever directory is currently selected at the time of the transfer will be used. Click OK to continue. 8. Click OK after reading final status message. 9. Reboot machine so that changes made may take effect. You are now ready to run HyperACCESS Pro and/or HyperHost for OS/2. -------------- Reporting Bugs -------------- When you report bugs, please tell us which beta you are using (Beta #2) and provide enough detail so that we can reproduce the problem. It is much more useful to hear "when I do this, then this, then this, the program misbehaves in this way," than to hear that something "doesn't work right." Too much information is much better than not enough. We're looking for more than just bug reports; we also want to know what you think. So please give us your comments and opinions, and let us know what additional features you would like to see in future versions. We would also love to receive a detailed account of how you use HyperACCESS Pro in your particular field of business. We might even want to share your experiences in articles, reviews, or advertisements (with your consent, of course). The best way to submit bug reports is to post messages in CompuServe. That way, you and others can see what has been reported, together with our responses. If you have access to our private beta section, post your messages there. Otherwise, you may post them in our public section (type Go Hilgraeve). We generally answer all messages within one or two business days. And, just in case you were wondering, no, Hilgraeve does not receive any commissions from CompuServe. The HyperACCESS Pro Beta Coordinator is: Susan Lewis Compuserve ID: 71055,54 INTERNET: 71055.54@compuserve.com If you prefer not to use CompuServe, you may send mail to the Internet address above; post messages on the Hilgraeve BBS (313-243-5915); or send us a fax (313-243-0645). While we always respond to CompuServe messages, we generally respond to messages received other ways only if we need more information. Please do not report bugs by phone. ---------------------------------- Known Bugs and Incomplete Features ---------------------------------- A number of features are not yet completed in this version of HyperACCESS Pro. We have disabled the controls for these features, so if you run across a control that is greyed out, it means that feature is not yet complete. The following is a list of incomplete features and known bugs in this beta release of HyperACCESS Pro and HyperHost. Please do not report bugs in these areas: NOTE: While we welcome your comments on speed and performance at any time, please reserve final judgment until later. Performance will improve gradually as the product nears completion. o Help is incomplete o SPX/IPX is not complete - USE AT YOUR OWN RISK o Product has not been tested completely under OS/2 2.11 or the Merlin Beta o Phonebook entries created by Beta #1 will not work. You will need to re-create them with this version. Task ID Description ==================================================================== 10698 Option to disallow callers to remotely access HyperHost's menus has been disabled. 10989 Instability occurs during remote control when Host machine is set to 1280x1024 resolution. 10978 Performance degrades when color reduction is set to 16 colors and Host machine is set to 65k colors or higher. 10711 Host waits for approximately 10 seconds after a completed enhanced file transfer to acknowlege the completion. During this time no other transfers may be started. 10570 Enhanced entries can connect to a standard host, but then file transfers do not work. 11001 Option in Remote Control window to allow callers to change who controls Host PC is disabled. 10428 Program's icon becomes corrupted when minimized during file transfers. 10567 On-the-fly graphics viewing of GIF files does not work properly with enhanced file transfers. 010628 In the Host and Terminal, if you select the minimize button while the terminal screen's context menu is displayed, it will lock up the system. 010211 Host inactivity timeout checkbox (on Host's Security page) has no effect. Host will always time out according to the timeout value regardless of the state of this checkbox. 010348 On the Host's Security page, the "disconnect users who fail to login x times" checkbox has no effect. ---------------------------------------------- Draft Copy of Final HyperACCESS Pro README.TXT ---------------------------------------------- The following draft copy of the README.TXT file that we expect to provide with the final release of HyperACCESS Pro is provided for reference only. NOTE: Because this draft is intended for inclusion with the shipping product, it may contain some information which does not apply to you as a beta tester. Please disregard such material. --------------------------------------------------------------------- HyperACCESS Pro with HyperHost for OS/2 Version 7.0 README File --------------------------------------------------------------------- README.TXT Contents =================== o Contacting Hilgraeve o Ray Gwinn's SIO Drivers o Using VMODEM o Setting Up HyperACCESS Pro for OS/2 on a Network o Upgrading from Other Communications Products o Lists, Upload and Download Directories o List Contents Disclaimer o Running Non-API Programs from HyperACCESS Pro o Weather Report and To-the-Second Utilities o DEC Terminal Keyboard Usage Notes o Batch File Transfers o Uninstalling HyperACCESS Pro o Installed Files -------------------- Contacting Hilgraeve -------------------- Hilgraeve may be contacted through the following means: Hilgraeve Inc. 111 Conant Ave. Suite A Monroe, MI 48161 Customer Support: 313-243-0576 FAX: 313-243-0645 BBS: 313-243-5915 Sales: 800-826-2760 or 313-243-0576 Compuserve: Go Hilgraeve Internet: support@hilgraeve.com sales@hilgraeve.com http://www.hilgraeve.com gopher.hilgraeve.com:9005 ftp.hilgraeve.com America On-line: Hilgraeve at America On-line ----------------------- Ray Gwinn's SIO Drivers ----------------------- HyperACCESS Pro with HyperHost for OS/2 comes with a copy of Ray Gwinn's renowned SIO shareware communications drivers. Ray's drivers have become extremely popular among OS/2 users, because they support speeds up to 115,200 bps (standard OS/2 Warp drivers limit you to 57,600 bps) and generally deliver better performance at lower speeds, as well. Please note that the enclosed copy of the SIO drivers is UNREGISTERED. If you decide to keep using SIO, you should register (pay the nominal registration fee) as described below, so Ray can continue to develop and support these outstanding OS/2 comm drivers. Also note that Ray is solely responsible for the support of the SIO drivers. If you have questions relating to SIO or encounter difficulties with this shareware product, you will need to contact Ray (not Hilgraeve) for assistance, as described below. The following documentation has been provided by Ray Gwinn, the author of the SIO drivers: What is SIO? SIO is a Serial Input/Output (SIO) communications character device driver. It provides an interface between application programs and the serial communications hardware. SIO had been designed as a high performance replacement for the OS/2 device driver COM.SYS. This manual documents the known differences between COM.SYS and SIO.SYS. SIO only works with 8250 (type) serial I/O devices. Such devices include, but are not limited to the 8250A, 16450, 16550, 16550A and the 82510. If you have a PC that is an IBM or near-compatible which has a serial communication port, it is likely that it contains one of these devices. SIO will identify the type of serial devices that it finds at load time. Like other Device Drivers, SIO will do very little standing alone. There must be an application(s) program that makes use of SIO's functions before one will benefit from the use of SIO. Distribution, Ordering and Support Distribution and Ordering The entire package collectively known as SIO is ShareWare. It is not free software or freeware. See LICENSE.TXT and ORDER.TXT for additional information. The ShareWare version of SIO is distributed electronically. One may check their favorite electronic hangout for the latest version of SIO. The latest copy of the ShareWare version is always posted for downloading from the BBS at 1-304-255-7903 or 199.248.240.2. Registered versions of SIO are distributed by US Mail and electronically from the SIO Distribution and Support BBS. Users desiring to register electronically, may call the BBS and register on line (1-304-255-7903 or 199.248.240.2) and immediately download their registered version of SIO. Use the ORDER command at the main BBS prompt. Registrations/Orders can also be placed by phone, mail, FAX, and email. See the front cover of this manual for the phone numbers and addresses. Also see ORDER.TXT for and order form that may be used. Support Extensive testing has been done to insure that this product works on the widest possible range of OS/2 V2 (and up) systems. In most cases, problems can be resolved by reading this manual carefully. Support is provided in section 4 of the OS/2 Vendor Forum on CompuServe (GO OS2BVEN). Section 4 of the OS2BVEN Forum is dedicated to the support of SIO. In addition, support is provided by BBS, Email and FAX. Voice support would overwhelm the author and is not available. If, after reading the manual carefully, you are unable to resolve a problem, you may submit a problem report to one of the following: Email CompuServe: 71154,575 Internet: ray@gwinn.com FAX 1-304-255-7902 BBS 1-304-255-7903 or 199.248.240.2 Users should note that Support does not always result in a correction of a problem. In addition, the support provided is support of SIO, and not the applications that use SIO. Questions and/or problems about applications programs (such as terminal or FAX programs) should be directed to the available support for the application. Installing SIO/VSIO SIO is distributed as a ZIP file. To extract the individual files from the distribution file you need the program PKUNZIP or an equivalent. PKUNZIP is a product of PKWARE and can be downloaded from almost any bulletin board system (BBS). You probably already have PKUNZIP and know how to use it, otherwise I doubt that you would be reading this. When PKUNZIP is used to extract the various files, -AV should appear after each file name as it is extracted. In addition, the message: Authentic files Verified! should appear after the extraction process. If this message does not appear, or appears with a name other than Raymond L. Gwinn, the file is not an original SIO distribution file. The only file that the basic user actually needs is SIO.SYS. Virtual DOS machine (VDM) users will also want VSIO.SYS. Copy one or both of these files to a convenient directory or subdirectory on your system. An installation program (INSTALL.EXE) is provided to install the SIO files and modify your CONFIG.SYS. Quick Start Create a temporary directory, change into that directory and unzip the SIO distribution zip there. Type INSTALL followed by the enter key. For a basic setup, that is all that is needed. If you choose to install SIO manually, the following should be done. BE SURE THAT ANY SERIAL MOUSE DRIVER APPEARS IN THE CONFIG.SYS BEFORE SIO.SYS. If you are going to use standard communications ports, either COM1 or COM2 on an ISA bus (AT or clone), or COM1 through COM4 on a PS/2, then add the following line to your CONFIG.SYS file: DEVICE=SIO.SYS DEVICE=VSIO.SYS Be sure to REMark out the COM.SYS and VCOM.SYS device drivers if they exist in your CONFIG.SYS. With the above statements you will be able to use standard COM1 and/or COM2 (if they exist) on any PC system known to the author. The above, indented documentation was provided by Ray Gwinn, the author of the SIO drivers. If you have questions about the SIO drivers or encounter difficulties with this shareware product, please contact Ray as described above. ------------ Using VMODEM ------------ VMODEM is a virtual COM port driver that allows communications programs to use TCP/IP. Since HyperACCESS Pro and HyperHost directly support TCP/IP, using this driver is not needed. However, if you wish to use this driver, you may do so by setting up a new connection with 'Vmodem (Ray Gwinn's SIO)' as the modem name and whichever COM port you are using Vmodem on as the COM port. It's as easy as that. HyperACCESS Pro will function as though it is talking to a modem even though it will actually be using Vmodem and TCP/IP. ------------------------------------------------ Setting Up HyperACCESS Pro for OS/2 on a Network ------------------------------------------------ If you are setting up HyperACCESS Pro or HyperHost for OS/2 for use on a network, you should install the PROGRAM files into a network directory which is accessible to all users who you want to be able to use HyperACCESS Pro or HyperHost. You may prevent users from changing or deleting files in this directory by making this a read-only directory. Each user's DATA files, on the other hand, should be installed into a separate directory, which is accessible to that user. You may prevent other users from changing or deleting files is this directory by giving write access to that directory only to the authorized user of that set of data files. NOTE: You must possess a quantity of HyperACCESS Pro licenses equal to the number of potential users; see License Agreement. ------------------------ List Contents Disclaimer ------------------------ HyperACCESS Pro with HyperHost comes with libraries of 1000s of on- line systems that you can call. These libraries are actually ASCII files containing lists of BBSs and other on-line services compiled by independent, 3rd-party authors. You can download newer versions of these lists, plus a huge variety of similar lists, from BBSs and on- line services all over the world. Authors of such lists consider them to be copyrighted material. Therefore, we include lists only with the author's consent and in original, unaltered form. The authors maintain the copyright and the sole right to revise and update these lists. NOTE: If you find anything in these lists that you feel needs to be updated or revised, please notify the independent, 3rd-party author of the list, not Hilgraeve. These lists are copyrighted material of their authors, who retain the sole right to update and revise them. Certain lists may include BBSs that provide access to explicit materials--materials you may find offensive or unsuitable for minors. Hilgraeve in no way condones electronic distribution of such materials. If you find materials on a BBS offensive, please be aware that the List panel DOES enable you to delete that entry from your copy of the list. Due to disk space limitations, the Fidonet list is not provided with HyperACCESS Pro. However, you may find this list on our BBS. Simply download the file, set up a template and away you go. ------------------------------------------ Weather Report and To-the-Second Utilities ------------------------------------------ Weather Report ============== Weather Report (TM) is a cool utility that keep you abreast of up-to- the-minute changes in the weather around the country. It does this by calling up the FedWorld government BBS and selectively downloading various weather map and satellite images for you to view. To use Weather Report, simply double-click on the Weather Report icon in your notebook. You will be prompted to select from a list of available weather images. Once you have selected the images to download, it will call the BBS and take you through logging in and downloading the images. You will see the images appear as they are being downloaded, allowing you to view the latest hurricane or weather front moving through the area. NOTE: Since this particular BBS periodically changes login prompts for a new user, the logon script may get stuck waiting for a prompt that never appears. If this happens, simple hang up and call again. The script should then run to completion. To-the-Second ============= To-the-Second is a neat little atomic clock icon in HyperACCESS Pro's Phonebook that performs a special function. When you double-click it, it calls a US Government BBS, picks up the precise time and date from the National Bureau of Standards' atomic clock, then sets your PC's time and date accordingly. In the case you inadvertently set the incorrect time zone the first time you run the To-the-Second session, don't panic--you may correct this by opening the To-the-Second session and following these simple steps: 1. From the Terminal menu, click on Properties and choose Runtime Values from the list. 2. From the String #0: drop-down list find the 17th and 18th entries and delete them. 3. Click OK. 4. Connect to the To-the-Second session again to set the correct time zone. If you experience difficulty in connecting to this BBS and are using a high-speed modem, you may find that turning off your modem's error correction feature will correct this. You may do this by experimenting with your modem's initialization string. Usually adding a \N0 or a &Q0 to the session's additional modem commands will accomplish this. Refer to the documentation that came with your modem for further information. --------------------------------- DEC Terminal Keyboard Usage Notes --------------------------------- Keys Used to Emulate a DEC Terminal's PF1-PF4 Keys ================================================== The keys normally used in HyperACCESS Pro to emulate a DEC terminal's PF1-PF4 keys are F1-F4. Some people, however, prefer to use the keys at the top of the PC's numeric keypad (Num Lock, /, *, -), because these keys' physical location matches that of a DEC terminal's PF1-PF4 keys. If you prefer using these keys, select the "PF1-PF4 mapped to top row of keypad" checkbox in the terminal settings dialog for the DEC terminal you are using. When "PF1-PF4 mapped to top row of keypad" is checked ... ========================================================= The keys at the top of the keypad act as PF1-PF4, and F1-F4 revert to performing functions defined by the operating system. For example, F1 displays help, and Num Lock sends the character sequence that the DEC terminal associates with PF1. The operating system will also sense that Num Lock has been pressed, and toggle the keyboard's Num Lock state. The Num Lock state, however, has no effect on the behavior of the DEC terminal emulator when PF1-PF4 are mapped to the top row of the keypad. When "PF1-PF4 mapped to top row of keypad" is NOT checked... ============================================================ F1-F4 act as PF1-PF4, and the keys at the top of the keypad (Num Lock, /, *, -) perform their normal functions. For example, F1 sends the character sequence that the DEC terminal associates with PF1, and Num Lock toggles the keyboard's Num Lock state. When Num Lock is on, your PC's keypad (except the top row) emulates the numeric keypad of a DEC terminal. When Num Lock is off, your keypad's arrow keys emulate a DEC terminal's arrow keys. (If your keyboard has a separate set of arrow keys, that set will always emulate a DEC terminal's arrow keys, regardless Num Lock's state.) -------------------- Batch File Transfers -------------------- HyperACCESS Pro provides a method for sending a group of files from different locations using a single command. Here's how: 1. Create a "batch" file. This file will contain the paths and filenames of all the files you want to send. 2. While connected to the system you want to transfer the files to, select Send from the Transfer menu, or simply click the upload button. 3. Specify the batch file you created in step 1 as the file to send, choose the protocol and then click OK. It's as easy as that! ----------------------------- Uninstalling HyperACCESS Pro ----------------------------- The Uninstall program performs the following operations: 1. Removes HyperACCESS Pro's changes from the CONFIG.SYS and OS2.INI files on the PC where Uninstall is being run. 2. Deletes contents of the program directory associated with this installed copy of HyperACCESS Pro, unless the files were placed there by another installation of HyperACCESS Pro (or the directory is write-protected). 3. Deletes contents of the data directory associated with this installed copy of HyperACCESS Pro. If you want to keep notebook entry files, make backup copies before running Uninstall. 4. Deletes all desktop objects associated with this installation of HyperACCESS Pro. 5. Leaves any files that you have placed in the Upload, Download, and Lists directories, and leaves the HyperACCESS Pro directory structure intact, so you can still reach those files. --------------- Installed Files --------------- Other than placing these files in the directories specified during installation, HyperACCESS Pro makes one or two additional changes to your system. It places an entry in your OS2.INI to specify the program and user directories, and if you elected to have Setup modify your CONFIG.SYS file, the HyperACCESS Pro program directory is added to the LIBPATH and HELP statements within that file. Contents of ============================ REXX Scripts ============ GENIE.CMD Logon for Genie DELPHI.CMD Logon for Delphi MCI.CMD Logon for MCI Mail DOWJONES.CMD Logon for Dow Jones CIS.CMD Logon for Compuserve BIX.CMD Logon for BIX SIO.CMD Logon for SIO Support BBS IBM.CMD Logon for IBM National Support BBS ATTMAIL.CMD Logon for AT&T Mail NEWSNET.CMD Logon for NewsNet OS2SHARE.CMD Logon for OS2 Shareware BBS WEATHER.CMD Logon for FedWorld BBS Executable files ================ MAPSELEC.EXE Runs before weather.cmd SET_TIME.EXE Logon for To-the-Second entry Notebook Entries ================= COMPUSER.HAO Compuserve notebook entry ATTMAIL.HAO AT&T Mail notebook entry GENERIC.HAO Generic BBS notebook entry DELPHI.HAO Delphi notebook entry HAINET.HAO Generic internet notebook entry DOWJONES.HAO Dow Jones notebook entry GENIE.HAO Genie notebook entry HILGRAEV.HAO Hilgraeve BBS notebook entry BIX.HAO Bix notebook entry MCIMAIL.HAO MCI Mail notebook entry NEWSNET.HAO NewsNet notebook entry IBM.HAO IBM Support BBS notebook entry SIO.HAO SIO Support BBS notebook entry OS2SHARE.HAO OS/2 Shareware BBS notebook entry TOTHESEC.hao National Time Server notebook entry WEATHER.HAO FedWorld BBS notebook entry DEFTERM.HAO New standard notebook entry template DEFPRO.HAO New enhanced notebook entry template HAHOST.HHO HyperHost notebook entry DEFHOST.HHO New Host notebook entry template Uninstall Files =============== SETUP.INS Setup utility script ~INS0762.LIB Setup support library SETUP2.EXE Setup utility INSTALL.CFG Installation config file HAUNINST.CMD Uninstall script Miscellaneous ============= HA.INI HyperACCESS settings HAHOST.PWD HyperACCESS Host password list PCWEXP.WAS Procomm/Win export script PCW2EXP.WAS Procomm/Win v2 export script DEFAULT.LOG Default call log file INSTALL.LOG Installation log file USERMDM.MOD User modified modem definitions Sounds ====== CONNECT.WAV Connection sound DISCNCT.WAV Disconnection sound XFERCOMP.WAV File transfer complete sound XFERABRT.WAV File transfer aborted sound INCOMING.WAV Incoming call sound SCRPTCMP.WAV Script comple sound Text Files ========== README.1st Beta readme file README.TXT File you are reading now WELCOME.TXT Host welcome banner HOSTHELP.TXT Text file explaining Host commands APIHELP.TXT Text file giving API examples API_REF.TXT Text file documenting API calls SIO Communications Drivers ========================== SIO153.ZIP Ray Gwinn's OS/2 comm drivers Contents of \LISTS ================================== List Files ========== OS2.BBS A list of OS2 BBS's (International) SBIQ.LST A list of BBS's on the Internet (TCP/IP) USBBS136.LST A list of BBS's (US only) POCIA.TXT A list of Internet Service Providers (ISP's) Contents of =========================== Icons ===== HOST.ICO HyperACCESS Host icon NPFOLD1.ICO HyperACCESS folder icon NPFOLD2.ICO HyperACCESS open folder icon HAREADME.ICO Readme icon HAUNINST.ICO Uninstall icon Dynamic Link Libraries ====================== HAHELP.DLL HyperACCESS help DLL HA2C_SHR.DLL OS/2 shared port comm. driver HA2C_STD.DLL Standard comm. driver HA2C_TCP.DLL TCP/IP comm. driver HA2CNETB.DLL NetBIOS comm. driver HA2CLINK.DLL Enhanced link comm. driver HA2X_DIR.DLL Direct connection driver HA2X_STD.DLL Standard connection driver HA2X_TCP.DLL TCP/IP connection driver HA2XNETB.DLL NetBIOS connection driver TDLL.DLL HyperACCESS support DLL RCH.DLL RCC.DLL HAKM.DLL RCHHDW.DLL SH30OS2.DLL Memory manager DLL Executables =========== CONVERT.EXE HyperACCESS Conversion program HALOGON.EXE Logon for Hilgraeve BBS HAPRO.EXE HyperACCESS Pro for OS/2 program HHOST.EXE HyperHost for OS/2 program HAVIEW.EXE HyperViewer program RESETINI.EXE Resets HA.INI (WARNING: All user settings will be lost) SET_TIME.EXE Logon for National Time Server UNSET.EXE Uninstall executable Help Files ========== HACCESS.HLP HyperACCESS Pro help HOSTHELP.HLP HyperHost help CONVERT.HLP Conversion help HAVIEW1.HLP HyperViewer help HAVIEW2.HLP HyperViewer help API Support Files ================= HA_AUTO.H API include header file HA_AUTO.LIB API library file HA_AUTO.DLL API support DLL Miscellaneous ============= MODEMS.BIN Modem definition file