PROGRAM DESCRIPTION BillPower, one of the finest time & billing programs available at any price, is a fully integrated timekeeping, billing, and bookkeeping system that will produce a wide variety of reports, including income-expense statements, balance sheets and aged receivables reports. The user has wide latitude in designing billing formats that use any font and place transaction data wherever desired. The program will even print mailing labels and form letters to your clients. Unlike some other time & billing programs that provide "links" to external accounting software, BillPower has a General Ledger that is totally integrated into the rest of the program. This program can simultaneously log a trans- action, adjust the client's balance and aged receivables accordingly, AND up- date the appropriate G/L accounts (other programs would require separate en- tries for some of these events, if they could handle them at all). BillPower is a "real time" system. No old fashioned batch postings or end-of-period close-outs are ever needed. Transaction detail is retained until the user (not the program) decides to omit it. In fact, old bills may even be re-prepared long after other systems would have "flushed" the needed informa- tion from the data base. BillPower's user interface is among the friendliest on the market, and the program's flexibility and responsiveness cannot be beaten anywhere. Finally, BillPower may be used in conjunction with TickleX, the ultimate scheduling software. When used together, these two programs will form the backbone of your office's business activity. On a network or stand-alone computer, BillPower will handle your time & billing needs like nothing else. Give it a thorough work-out. NOTE: This software is a living -- and evolving -- product. It is constantly being enhanced as a result of suggestions from users. If you have any ideas, don't hesitate to contact Integra Computing at 770-426-5735. INSTALLATION INSTRUCTIONS (page 1) Note that a Windows 95 version of this program is available for Windows 95 users. If you went through the automated INSTALL.BAT routine, the program files have already been placed into an INTEGRA directory on your hard disk. If, on the other hand, you did not go through the INSTALL.BAT routine, you should run the SETUP.BAT routine. Assuming your printer is attached to the LPT1 port on your computer, the command to run is SETUP LPT1 That command will cause the files to be copied to an INTEGRA directory on your hard disk. - RUNNING THE PROGRAM - If you're in a hurry to see what the program is like before completing the basic setup for Windows, you may do so by using File | Run in the Program Manager or by double-clicking on it in the File Manager. The name of the file to execute is BILLPOWR.EXE. INSTALLATION INSTRUCTIONS (page 2) - COMPLETING THE BASIC SETUP FOR WINDOWS 3.x - If you'd like to access the program through its icon, complete the basic setup for Windows 3.x (see next page for Windows 95): 1) Go to the Program Manager. There, you will see that most of your programs are organized into program "groups". Select the program group in which you wish to include this new program. It doesn't make any difference which program within the group may be high- lighted, as long as the group you desire is selected. 2) Now, select File | New at the Program Manager menu bar. 3) A "New Program Object" box will open. Select Program Item and press the OK button; 4) A "Program Item Properties" Box will open. Here's what you should enter: Description: (here, enter this program's name) Command Line: BILLPOWR.EXE Working Directory: C:\INTEGRA (assuming that the program is on drive C; if not, substitute the appropriate letter) Shortcut Key: None 5) Now, press the "Change Icon..." button. When you do, a "Change Icon" box will appear. The File Name you should enter is: C:\INTEGRA\BILLPOWR.ICO (again assuming that the program is on drive C; if not, substitute the appropriate letter) Press the OK buttons to save the icon and the rest of the properties you've entered. 6) If you're a registered user, follow the "Registered Users" instructions found on page 6. 7) For network installation, see the section devoted to Installation in the program's on-line help. Also see that section if you want the program to run AUTOMATICALLY whenever you load Windows. INSTALLATION INSTRUCTIONS (page 3) - COMPLETING THE BASIC SETUP FOR WINDOWS 95 - If you'd like to access the program through its icon, complete the basic setup for Windows 95: 1) Point to the Start button on the Task Bar. When you RIGHT-click the mouse, a menu will appear. Select "Open" on the menu. 2) A "Start Menu" box will appear. Double-click on the "Programs" folder. 3) A "Programs" box will appear, showing the sub-folders currently included within Programs folder. Double-click on the folder in which you wish to include this program. 4) A box showing the programs contained within the folder will appear. Select File | New at the box's pull-down menu. Then, select "Shortcut" at the sub-menu that appears. 5) A "Create Shortcut" box will appear. Into the "Command Line" item, type C:\INTEGRA\BILLPOWR.EXE 6) Then, you'll be asked to select a name or title for this program or shortcut. Type in anything that is meaningful to you. 7) The new program will then be added to the folder. Point to it and RIGHT-Click. In the menu that appears, select "Properties". 8) A "Properties" box will appear. Select the "Shortcut" tab and then press the "Change Icon" button. When the "Change Icon" box appears, type C:\INTEGRA\BILLPOWR.ICO and press the OK button. 9) Back at the Properties box, press the "Apply" button and then the OK button. 10) For network installation, see the section devoted to Installation in the program's on-line help. INSTALLATION INSTRUCTIONS (page 4) - PRINTING THE MANUAL The manual consists entirely of on-line help that is organized into several "chapters" referenced in its table of contents. Selecting "Help" at the pull-down menu will take you into the help system, where you may search for information by keyword. Pressing the F1 key almost anywhere within the program will take you directly to a section of the manual that discusses that section of the program. Printing the manual involves several steps. First, get into the help system ("Help" or F1). When there, select the "Contents" button. At the Contents page, select File | Print. After the Contents page has printed, select the first topic in the Contents listing. When that topic appears, select File | Print. After that topic prints, return to the Contents page and select the next topic and print it. Repeat this process until the entire manual has been printed. INSTALLATION INSTRUCTIONS (page 5) - PROBLEMS - VIDEO: -> If vertical and horizontal scroll bars appear when the program loads, your window borders may be too wide to allow enough space for this program's screens to display in full. Reduce the size of your window borders to 1 by running the "Desktop" program (usually found in "Control Panel" group in Windows' Program Manager). Or, simply "maximize" the program on the screen. -> If gibberish appears anywhere in the program, the problem is that the video driver you are using cannot produce all the fonts used by the program. Try another driver. Video drivers are selected in the Windows "Setup" program (usually found in the "Main" group in the Program Manager). -> If text on the screen or printer seems improperly sized or does not seem to fit neatly into the areas where it should, there are two possible reasons: One possibilty is that the video driver you're using may not be optimal. Some drivers seem to be incapable of producing text of a selected font at the correct size, especially at the higher resolutions. If you have a choice between a driver that uses "large fonts" and one that uses "small fonts", choose the latter. Video drivers are selected in the Windows "Setup" program (usually found in the "Main" group in the Program Manager). Another possible cause of poorly fitting text is that you may be either missing some font files, or using font files that have been altered by other software. This program relies upon the following ORIGINAL fonts supplied by Microsoft Windows: Arial, Courier New, Terminal, and System. If they seem to be unavailable, they may be somewhere on your hard disk, but not installed. Try using the Windows "Fonts" routine (found in the "Control Panel") to find and install (or add) them. Also useful may be the /NT option discussed near the end of the on-line help's "Configuration" section. PRINTER: -> If fonts appear to be improperly sized, or if gibberish appears on the printout, make sure that the printer driver that you have installed into Windows is specifically matched to your EXACT printer model. A "close" match or "emulation" may not be good enough. This program does nothing fancy with your printer. It relies ENTIRELY upon Windows to handle the printing. If it doesn't appear to be working properly, your printer driver is probably to blame. So why do other programs appear to work with your printer and its driver? Perhaps because those programs don't rely upon the same Arial and Courier New fonts that this program does. Or perhaps the other programs are somehow bypassing Windows to print directly to the printer. Be assured that if your Windows printer driver is a good match for your printer, this program's output will be fine. INSTALLATION INSTRUCTIONS (page 6) - REGISTERED USERS - If you have registered as a user, you have a serial number printed on the distribution disk's label. You now need to let the program know that you acknowledge your serial number. To do so, 1) Go to the program manager and select File | Run at the menu bar. 2) At the Run box, enter C:\INTEGRA\BILLPOWR.EXE /RP at the Command Line item. This command assumes that you have loaded the program onto drive C. If not, substitute the appropriate letter. For instance, if you loaded the program onto drive F, F:\INTEGRA\BILLPOWR.EXE /RP would be entered instead. 3) When asked for your serial number, enter it. Once you've completed this process, the program will skip the registration info screen when loading. But you may confirm your serial number and the number of network workstations for which you are registered by selecting Help | About at the Main Screen's menu bar when running the program.