This Zip file contains to templates for Envelopes in IBM Works.

COM10 Envelope - 4 1/8  X  9 1/2

Small Envelope - 3 5/8  X  6 1/2


USING THE TEMPLATES
-------------------
To use these envelope templates, open them into IBM Works, change the names and
addresses as follows, and print.

The templates are set up to work with laser printers that feed envelopes from
the middle of the paper feed.

Before printing, make sure in your printer object that you set the paper type
to LETTER and the orentiation to LANDSCAPE.

The page setup is already setup to print in landscape.  I have yet to see a 
laser printer that does not print envelopes in landscape mode, so this should
not have to be changed.


LASER PRINTERS THAT FEED ENVELOPES FROM THE LEFT
------------------------------------------------
If your printer feeds envelopes from the far left, you should still be able to
use these envelope templates by moving the return address to the far left of
the page, and moving the main address left by an equal number of spaces.


DOT MATRIX PRINTERS
-------------------
If you want to use these templates with a Dot Matrix printer, it may be easier 
to feed the envlope in portrait orentation.  To do this, change the page setup
to portrait, move the return address to the far left, and move the main address
left by an equal number of spaces.  Also, do not set up your printer object to
print in landscape orentation.


COMMENTS & SUGGESTIONS
----------------------
jnaumann@csd.uwm.edu