------------------------------------------------------------
 NetSoft LAN 1.40a Printing Notes for PostScript Printers
------------------------------------------------------------

Purpose: These files are the "Complete User's Guide and
         Reference Manual" for the NetSoft LAN Network
         Operating System 1.40a.

Status:  NetSoft LAN and this documentation are shareware.

Author:	 Albert Graham (agraham@netsoft.ie)

support: http://www.netsoft.ie/
         support@netsoft.ie

------------------------------------------------------------

You will require an PostScript compatible laser printer
to print the files.

------------------------------------------------------------
The following files now exist:

PSPREP    EPS   - PostScript Header File
LAYBOUTPS EPS	- User's Guide Layout - Print this first
COVER     EPS	- Cover Page
TITLE     EPS   - Title Page & Legal Stuff
TOC       EPS	- Table of Contents
WELCOME   EPS	- Welcome
CHAP1     EPS	- Getting Started
CHAP2     EPS	- Network Installation
CHAP3     EPS	- The NET Command
CHAP4     EPS	- The DOS-NET Pop-up Main Menu
CHAP5     EPS	- The Station Manager
CHAP6     EPS	- Network Printing
CHAP7     EPS	- The Communications Redirector
CHAP8     EPS	- File and Directory Protection
CHAP9     EPS	- Extended Network Filing System
CHAP10    EPS	- Network Hardware Drivers
CHAP11    EPS	- Inter-Networking and Packet Routing
CHAP12    EPS	- NetBIOS
CHAP13    EPS	- The DOS SHARE command
CHAP14    EPS	- CD-ROM Drives
CHAP15    EPS	- Microsoft Windows Network Installation Procedures
CHAP16    EPS	- Developing Muli-User Applications
CHAP17    EPS	- The DOSNET.INI Configuration File
CHAP18    EPS	- Error Messages
CHAP19    EPS	- Cable Specifications
APPENDA   EPS	- Using High Memory
APPENDB   EPS	- Loading Order
APPENDC   EPS	- Unloading
APPENDD   EPS	- Network Card Check List
INDEX     EPS	- Index
NOTES     EPS	- Notes

README   TXT	- This file
------------------------------------------------------------

To print these files, copy them (in binary mode) to the 
printer port. e.g.

------------------------------------------------------------
When you turn on your printer copy the PSPREP.EPS header file
to your printer using the following command.

COPY /B PSPREP.EPS PRN (press enter)

If you reset your printer between printing chapters you must
copy this file to the printer again.
------------------------------------------------------------

COPY /B CHAP1.EPS PRN (press enter)
(do this for each file in the above list)

The first file you should print is LAYOUTPS.EPS, this file
is a single page showing the entire layout of the documents.

COPY /B LAUOUTPS.EPS PRN (press enter)

------------------------------------------------------------

    You MUST register NetSoft LAN after 30 days of use.

------------------------------------------------------------