ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Sound Blaster Updates Disk º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ This file contains the following sections: 1. Installation requirements 2. Installation Instruction 3. INSTALL's operation 4. Updated files 1. INSTALLATION REQUIREMENTS To install Sound Blaster Updates, you require INSTALL.EXE, INSTALL.PVL and an additional file that is card dependent. (Refer to the table below) ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Audio card ³ File required º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍØÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Sound Blaster 16 (Advanced Signal Processor) ³ SB16UPD.PVL º º Sound Blaster 16 ³ SB16UPD.PVL º º Sound Blaster Pro 2 ³ SBPROUPD.PVL º º Sound Blaster Pro ³ SBPROUPD.PVL º º Sound Blaster 2.0 ³ SB2UPD.PVL º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 2. INSTALLATION INSTRUCTION To update your Sound Blaster software, follow the steps below: a. Copy all the files required (as shown in section 1) onto a floppy disk or a directory in your hard disk. b. Run the program INSTALL.EXE from the floppy disk or your hard disk. c. Follow the program's instruction to complete the installation. 3. INSTALL's OPERATION INSTALL will perform the following tasks: a. Move all out-dated files that are no longer in use from your Sound Blaster directory to the BACKUP directory. b. Back-up all files that will be updated to the BACKUP directory. c. Install updated programs to your Sound Blaster directory. d. Verify and update the files WINSETUP.INF and OEMSETUP.INF if necessary. If you choose to update the drivers in your Windows directory, the program will perform the following tasks: a. Remove all out-dated drivers that are no longer in use from your Windows directory. b. Install updated drivers to your Windows directory. c. Verify that the file SYSTEM.INI contains the correct name of the Sound Blaster driver. At the end of the installation, a log file SBUPDATE.LOG will be created in your Sound Blaster directory. You may use a text editor to view this file. Alternatively, follow the steps below: a. Change to your Sound Blaster directory. b. Type "TYPE SBUPDATE.LOG" and press . 4. UPDATED FILES  Note - BACKUP directory refers to the directory \BACKUP in your Sound Blaster directory which will be created by INSTALL. For Sound Blaster 16 (Advanced Signal Processor) users ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The following files will be updated: SBCONFIG.EXE WINSETUP.EXE WFM0006.ACV WFM0007.ACV WFM0200.ACV CTVDSK.DRV CTWDSK.DRV CSP.SYS MMPLAY.EXE SBSIM.COM VOICE.EXE VPLAY.EXE VREC.EXE WPLAY.EXE WREC.EXE SOUNDOLE.EXE VSBPD.386 CSPMAN.DLL SB16AUX.DRV SB16SND.DRV SB16FM.DRV WI0006.CSP WI0007.CSP WI0200.CSP WO0006.CSP WO0007.CSP WO0200.CSP WFM0001A.CSP WFM0006A.CSP WFM0007A.CSP WFM0200A.CSP The following files will moved to the BACKUP directory if it exists: ASP.SYS ASPMAN.DLL ASPMAN.DLL SBP16SND.DRV WO0200.ASP WI0200.ASP WO0006.ASP WI0006.ASP WO0007.ASP WI0007.ASP The following files will be verified and modified if necessary: WINSEUP.INF OEMSETUP.INF CONFIG.SYS If you choose to update your Windows drivers:- The following drivers in the \WINDOWS and \WINDOWS\SYSTEM directories will be deleted if it exists: SBP16SND.DRV ASPMAN.DLL The following drivers in the \WINDOWS and \WINDOWS\SYSTEM directories will be updated: CTRES.DLL SB16SND.DRV SB16AUX.DRV CSPMAN.DLL VSBPD.386 SB16FM.DRV MIDIMAP.CFG WFM0006.ACV WFM0007.ACV WFM0200.ACV The following file will be verified and modified if necessary: SYSTEM.INI For Sound Blaster 16 users ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The following files will be updated: SBCONFIG.EXE WINSETUP.EXE WFM0006.ACV WFM0007.ACV WFM0200.ACV CTVDSK.DRV CTWDSK.DRV MMPLAY.EXE SBSIM.COM VOICE.EXE VPLAY.EXE VREC.EXE WPLAY.EXE WREC.EXE SOUNDOLE.EXE VSBPD.386 CSPMAN.DLL SB16AUX.DRV SB16SND.DRV SB16FM.DRV The following files will moved to the BACKUP directory if it exists: WINSETUP.INF ASPMAN.DLL ASPMAN.DLL SBP16SND.DRV WVFM0006.ACV WVFM0007.ACV WVFM0200.ACV The following files will be verified and modified if necessary: WINSEUP.INF OEMSETUP.INF If you choose to update your Windows drivers:- The following drivers in the \WINDOWS and \WINDOWS\SYSTEM directories will be deleted if it exists: SBP16SND.DRV ASPMAN.DLL The following drivers in your Windows and Windows \SYSTEM directory will be updated: CTRES.DLL SB16SND.DRV SB16AUX.DRV CSPMAN.DLL VSBPD.386 SB16FM.DRV MIDIMAP.CFG WFM0006.ACV WFM0007.ACV WFM0200.ACV The following file will be verified and modified if necessary: SYSTEM.INI For Sound Blaster Pro 2 users ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The following files will be updated: SBPMIXER.EXE SBPSND.DRV SBPAUX.DRV VSBPD.386 SBP2FM.DRV MIDIMAP.CFG If you choose to update your Windows drivers:- The following drivers in the \WINDOWS and \WINDOWS\SYSTEM directories will be updated: SBPSND.DRV SBPAUX.DRV VSBPD.386 SBP2FM.DRV MIDIMAP.CFG For Sound Blaster Pro users ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The following files will be updated: SBPMIXER.EXE SBPSND.DRV SBPAUX.DRV VSBPD.386 If you choose to update your Windows drivers:- The following drivers in the \WINDOWS and \WINDOWS\SYSTEM directories will be updated: sbpsnd.drv sbpaux.drv vsbpd.386 For Sound Blaster 2.0 users ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The following file will be updated: SB20SND.DRV If you choose to update your Windows drivers:- The following driver in the \WINDOWS\SYSTEM directory will be updated: SB20SND.DRV ******* End of README *******