Fabri-Craft (tm) Rose Fever Covered Boxes

Band Boxes:

foreach box:
Fabricraft peel 'n stick 4C9l Black Velour,
scissors, tacky craft glwe or glue gun
and sticks

For the top box:
Fabricraft peel 'n stick 4C83 Primrose
8" wide round box
6" round white Battenberg doily
3 yards of 6" wide black tulle
1/4 yard of 1/2" black ribbon braid
3/4 yard of 1/2" white lace trim
1 stem of white silk statice with 1" blossom
1 stem of pink silk roses with 2" and 3" blossoms
22-gauge wire

for the middle box:
Fabricraft peel n'stock 4C26 Rose Fever Black Stripe
12" wide round box
1 /18 yard of 1/2" wide white lace trim

for the bottom box:
Fabricraft peel n'stick 4C24 Rose Fever Black
14" wode round box
1 1/4 yds. of 1" wide pink satin ribbon
2 yds of 1" wide black brocade ribbon
1 1/4 yds of 1/2" wide black ribbon braid
12 - 1/2" wide pink ribbon roses
22 guage wire


1. LID: Place the lid on the papcr side of the Fabricraft covering and trace
   around it Cut the fabric 2" larger than the lid.Remove the paper and center
   the lid. Smooth the fabric and trim excess inside the lid.
2. SIDES: Cut Fabricraft covering 2" taller than the height of thc box and 1"
   longer than the measurement around the box. Working  8"-10" at a time, pull
   off the paper and press fabric around the side. Trim excess inside the lid
   and under the bottom. If using Striped Fabricraft covering, position the
   design before you cut.
3. BOTTOM: Place the box on the paper side of the Fabricraft covering and
   trace around the bottom. Cut the fabric inside the line. Remove the paper
   and press the fabric inplace.
4. TOP BOX: Glue Braid, doily and flowers as desired. Make a loopy bow
   with eight 5" loops and 12" tails; secure with wire. Glue over the flower
   stems.
5. MIDDLE BOX: Follow steps 1-3. Trim the Velour along the lid edge. Glue lace
   over the trimmed edge.
6. BOTTOM BOX: Follow steps 1-3. Pinch and wire the back ribbon every 4 1/2",
   leaving 6" tails. Glue each pinch to the lid with a rose on top. Tie the
   tails in a knot with a rose in the middle. Cut the tails diagonally. Glue
   the pink ribbon and braid as shown

see RSFVR1.ZIP or RSFVR2.ZIP for .GIF views of the above project(s).