Pen for OS/2 device drivers

Make a temporary directory on disk, and extract pendd.zip to that directory by
using pkunzip.  You will see several zip files in that directory.

Each zip file is a separate device driver with install scripts for Pen for OS/2.

   710T.ZIP     IBM710t drivers
   750P.ZIP     IBM750P drivers
   APT.ZIP      APT Gliffic Plus drivers
   CALC.ZIP     Calcomp digitizers
   COMPAQ.ZIP   Compaq Concerto
   DTR1.ZIP     Dauphin DTR-1
   GRID.ZIP     GRiD convertibles

Select the device driver(s) that you need.Extract the files to your a: drive or
to a directory using the -d option for pkunzip.

  Example: pkunzip compaq.zip -d a:

Next run select the Pen for OS/2 Install object from the Pen for OS/2 folder
(or run pinstall from the command line).  Select the Install Pen device drivers
option, and select OK.

When it prompts for the device driver disk, insert it in drive a: (if you made a
device driver disk), or select the drive and directory that you unzipped the
archive to.  Next select Install.  A new window will open up, select the proper
device, and the destination drive and path.  Select Install, and when it is
done, reboot. Your pen should be active after the reboot.

Contact me via e-mail to newt@vnet.ibm.com if you have any problems.  If you are
within IBM e-mail to NEWTON at BOCA.

Enjoy,

Newton A. Cheung