README.ACU: That's the graphics driver for the AcuMos AVGA2 card. Most of the work is derived from Hartmuts CIRRUS54.GRN and Csaba's/DJ's STDVGA.GRN drivers, and Kendall Bennetts SVGAKT32 Super Vga Kit. I deleted the 32k color modes, checked out the correct mode numbers and tested the bank switching code. This driver could be interesting for the big bunch of ESCOM AT users. Every 'standard' ESCOM AT 386/486 here in Austria (and perhaps in Germany too) is shipped with such a VGA card. Matthias -------------------- README.CIR: CIRRUS54.GRN -- DJGPP graphics driver supporting the Cirrus 54xx chip series There are new Cirrus cards on the market. We have some cards around here at Kiel (especially on VESA local bus machines) so I set up this driver. Hartmut - - - - - - In addition to the text modes that were already available in the Cirrus driver, the following two text modes are now also available: 40x50x16 and 132x50x16. Some other text and graphics modes were added as well, two of which I should like to mention here because they require 2 Mb (or more precisely: at least 1.5 Mb) of video RAM: 1280x1024x256 and 1024x768x65536. The driver init routine now checks if there is enough RAM present for these two modes, and disables them if there is not. Finally, when using this driver with DISPLAY (version 1.57 or better), please put the following lines in the "Bytes per line scan table for TrueColour Modes" in CONFIG.DIS: bytes_per_line_true=0,2048 bytes_per_line_true=3,2048 Ben Jos Walbeehm (Walbeehm@fsw.ruu.nl) November 21, 1993. -------------------- README.GUP README 15-July-93 This is the version 1.0 release of the ATI Graphics Ultra Pro video driver. This driver supports the following text and graphics modes: text 80x25x2, 40x25x16, 80x25x16, 132x25x16 graphics: 320x200x16, 640x200x16, 640x350x16, 800x600x16, 1024x768x16, 320x200x256, 640x480x256, 800x600x256, 1024x768x256 To use unpack from your djgpp root directory: C:\DJGPP> pkunzip -d atigupro.zip And change your GO32 enviroment variable to point to the new driver: C:\DJGPP> set GO32=driver c:\djgpp\contrib\libgrx\drivers\atigupro.grn I have tested this driver with HIVIEW (the jpg viewer program) and it works in all modes on my EISA card. Send E-mail (cwolff@slowboy.intellistor.com) if you have a problem. Note: The modetest program worked ok with ATIULTRA.GRN, but hiview did not... I think it has something to do with selecting the colors... This drivers does not use any of the 8514 support, so it will be slower than atiultra (I think)... Good luck... -------------------- README.WD Hi, These two drivers are for Western Digital VGA chips, the driver WD90C3X.GRN is for the WD90C30 and WD90C31 although it might work with other Western Digital VGA chips. If WD90C3X.GRN doesn't work then try WDVANILA.GRN. Note that newer Paradise VGA cards use WD90C3X chips. These drivers define modes up to 1024x768 256 colors, 1280x1024 16 colors, and 132x50 text, if you have less than a megabyte or a more primitive Western Digital VGA chip then not all modes will work. John W. Horigan jhorigan@mipos2.intel.com Neither I nor Intel Corp. guarantee the functionality of these drivers. Intel Corp. has no connection with these drivers. These drivers were derived from the ET4000 driver, read the two 'copying' files for copyright (left) information. -------------------- SPARADIS.DOC This graphics driver is a modified version of paradise.asm that formed part of the original djgpp1.09 graphics drivers. This driver cannot be guaranteed.It has been tested using modetest.c , and all modes worked correctly.It is currently being used in a graphics intensive program in with no problems thus far. If problems are encountered ,my Internet address is: neek@cerecam.uct.ac.za -- Nick van der Merwe PhD Student Department of Surveying and Geodetic Engineering University of Cape Town South Africa