Kula Software Inc. 6070 Marine Drive West Vancouver, BC, Canada V7W 2S3 order line: 1-800-313-6070 tel: (604)921-5974 fax: (604)921-5973 CompuServe 72764,2254 14 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß 14 EZPNO v1.1a User's Guide 14 Copyright (c) 1994 by Kula Software Inc. 14 All Rights Reserved. 14 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß 15 Table of Chapters: 15 1. Introduction 15 2. Application Interface 15 3. File Management 15 4. EZPNO Editor 15 5. EZPNO Player 15 6. EZPNO Tutor 15 7. Key/Mouse Command Summary 15 8. I N D E X 01--------------------------------------------------------------- 1.0.0 14 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß 14 Chapter 1 14 Introduction 14 ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ 15 Sections for Chapter 1: 15 1. Overview 15 2. System Requirements 15 3. Installation 15 4. Sound Card / MIDI Interface drivers 15 5. Conventions Used in this Guide 15 6. Music Terms Used in this Guide 151.1.0 Overview 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ EZPNO is an open-ended piano instruction program. Its goal is to encourage people with little or no musical experience to learn to play the piano. However, piano students of all levels will find it to be a valuable learning aid. When supplied with standard music notation, the 11EZPNO Tutor translates the score into a step-by-step teaching tool that uses three-dimensional computer graphics and audible music. With a MIDI keyboard, the student may practice sight-reading of the sheet music as EZPNO follows the progress. Music notation may be entered manually in the 11EZPNO Editor by the user or piano instructor, or imported from a standard MIDI file. Song files may be saved as EZPNO files, or as standard MIDI files for use with other music software. Or just for fun, fire up the 11EZPNO Player which features General-MIDI instrument selection by clef, graphic animation, and song lyrics during playback for karaoke-style sing-alongs. 151.2.0 System Requirements 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ IBM compatible PC with hard disk and 1 floppy disk drive MS-DOS 3.3 or greater VGA graphics adaptor 640K RAM Mouse optional Sound card / MIDI interface recommended Math Coprocessor ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ EZPNO features an full 88-key three-dimensional piano in regular and zoom views. If you have a math coprocessor (DX chip), you may set 11[3D draw] in the Global Settings dialogue box (Function key 15). This will enhance the three-dimensional quality of the images. If you do not have a math coprocessor, the drawing will be slow in this mode. 151.3.0 Installation 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ EZPNO must be installed on the hard drive to operate correctly. Insert the program diskette into drive A. At the DOS prompt, type 15a:install and press 15. (replace b: for a: for floppy drive B) 15 Items for this Section: 15 1. Starting the Program 15 2. EZPNO command line switches 15 3. 3D Piano Image Installation 151.3.1 Starting the Program 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Be sure to be in the \EZPNO directory when you start the program. EZPNO searches only the current directory for its supporting files. Type 15e-z-p-n-o to start the application. 151.3.2 EZPNO command line switches 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The following switches may be typed after 15'ezpno' at the DOS prompt: 15-? Display all command line arguments. 15-i[xx] Override MPU401 IRQ (default=2) 15-p[xxx] Override MPU401 port address (default=330h) 15-q Quiet mode. 15-pc Force PC speaker. 15-mpu Force Roland MPU401. 15-sb Force Sound Blaster. 15-gus Force UltraSound driver. 15-vmp Force Voyetra VMP driver. 15-x[xxxx] Detects and uses Extended memory(XMS) for program overlays. Sometimes EZPNO loads program code from disk (eg. for dialogue boxes, on-line help). With this switch enabled, EZPNO can save overlays in XMS for faster retrieval. This may improve program performance. A starting address may be set in kilobytes (eg. ezpno -x1000: use XMS at address 1,000,000). 15-e Detects and uses Expanded memory(EMS) for program overlays. See description above for XMS. 151.3.3 3D Piano Image Installation 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ When loading EZPNO for the first time, it will run a quick installation program to create 3D piano image files. Simply follow the instructions on the screen. 151.4.0 Sound Card / MIDI Interface drivers 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ EZPNO automatically searches for the sound card or driver installed on your system. If no sound card or driver is found, EZPNO uses the PC speaker for sound. If more than one card is installed, you must specify the card desired on the command line (see 1.3.2 EZPNO command line switches). The following sound cards are currently supported: 04Sound Card/MIDI Interface driver Roland MPU401, or compatible - Sound Blaster - Advanced Gravis UltraSound ultramid Others Voyetra VMP drivers 15 Items for this Section: 15 1. Roland MPU401 15 2. Sound Blaster 15 3. Advanced Gravis UltraSound 15 4. Other sound cards 151.4.1 Roland MPU401 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The default IRQ is 2. The default MIDI port address is 330h. These settings may be overrided on the command line with the 15-i switch or the 15-p switch. 15eg. ezpno -i5 -p300 This command sets EZPNO to use IRQ 5 and port address 300h. (see 1.3.2 EZPNO command line switches) 151.4.2 Sound Blaster 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The BLASTER environment variable must be set in order for EZPNO to use the Sound Blaster card correctly. 15eg. SET BLASTER=A220 I7 D1 T3 (A=Base port I/O address, I=IRQ number, D=DMA channel, T=Sound Blaster version) You should have a line that looks like this in your autoexec.bat file. See the Sound Blaster user manual for more details. To use the Sound Blaster MIDI interface adaptor, your card must have DSP ROM version 2.00 or later. 151.4.3 Advanced Gravis UltraSound 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The ultramid driver must be loaded prior to running EZPNO. To load, simply type 15'u-l-t-r-a-m-i-d' at the DOS prompt. The following command line switches may be used with ultramid: 15-16 Use 16-bit patches for improved sound performance. The default is 8-bit. 15-c Preloads a 256K, 512K 768K or 1024K patch library, depending on how much memory you have on your UltraSound card. 15-f Unload ultramid from memory 15-m[xxx] [1-127] Sets the master volume for music. The default volume is 127. 15-d[path] Use an alternate path for finding the ultramid configuration file and for finding patches. The path should include a trailing backslash (e.g.) -Dc:\game\ 151.4.4 Other sound cards 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ EZPNO supports many more sound cards via the VMP drivers created by Voyetra Technologies. Call Kula Software for more information as to how to obtain these drivers. 151.5.0 Conventions Used in this Guide 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Names of keys on the computer keyboard are in this style: 15 - user is to press the Enter key 15 - user is to hold down the Shift key, press the Delete key, then release both keys. Icons that may be selected by keyboard or mouse are in this style: 11[Lyric] 14MLB and 14MRB are used as an abbreviation for Mouse Left Button and Mouse Right Button respectively. 151.6.0 Music Terms Used in this Guide 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ note - The fundamental unit of music which represents a sound at a specific pitch. note duration - The length of time for which a note is sounded. chord - This term describes a position within a measure. The chord may consist of one note, or a group of notes. measure - The basic unit of a song which consists of a group of chords delineated by vertical bars. 01-------------------- End of Chapter 1 ----------------------------------- 2.0.0 14 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß 14 Chapter 2 14 Application Interface 14 ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ 15Sections for Chapter 2: 15 1. General Description 15 2. Slidebar 15 3. Selectors 15 4. Text Icons 15 5. Text Selector Icons 15 6. Dialogue Boxes 15 7. Warning Dialogue Box 15 8. Free Memory 15 9. File Saving 15 10. Clef Deactivation 152.1.0 General Description 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The application interface is a graphical user interface (GUI). All icons may be accessed by either by the keyboard, or clicking the mouse left button (14MLB). There are four modes accessible from the Main Menu (15): EZPNO Editor 15 EZPNO Player 15

 EZPNO Tutor 15 Quit 15 The Editor is used for creating music notation. The Player allows playback of songs with animation and scrolling lyrics. The Tutor is used for step-by-step learning of the loaded song. Select Quit to exit the program. In every mode, icons will appear which are applicable to the current mode. Function key icons are always accessible along the bottom of the screen and may be activated by pressing the corresponding function key, or clicking on the icon with the mouse. There are more function keys available by holding down the 15 key and then pressing the desired function key. 152.2.0 Slidebar 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The slidebar under the music notation window is for navigating the song measures. The number on the slider button displays the current measure. The following are some basic keyboard commands to move the slidebar: 15 - move to previous measure 15 - move to next measure 15 - move back ten measures 15 - move forward ten measures 15 - move to first measure 15 - move to last measure With the mouse, click the 14MLB on the slidebar arrow icons or anywhere along the slidebar. Alternatively, drag the slider button along the slidebar. 152.3.0 Selectors 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ With the keyboard, selectors must be accessed first by hot-key before access to its functions are allowed. When a selector is active, the heading will be highlighted. The selector functions are accessible by either hot-key, or by moving a highlighted box with the arrow keys to the desired icon and then pressing 15. To exit the selector without making a choice, press 15. With the mouse, simply click the 14MLB on the desired icon. 152.4.0 Text Icons 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Text icons allow text input in dialogue boxes. They are accessed by label hot-key or by clicking the 14MLB in the text window. When active, the label will be highlighted. Press 15 to accept or 15 to reject the input. Clicking the 14MLB outside of the text window will also reject the input. Text icons that allow numeric input will have 11[+][-] buttons next to the text window. Click the 14MLB on these buttons to increment or decrement the current value by one. 152.5.0 Text Selector Icons 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Text selector icons resemble text icons except that the user is presented with a list of choices. To advance the list press the 15 or click the 14MLB. When the desired choice is found press 15 or click 14MLB outside of the window. 15 will reject the input. 152.6.0 Dialogue Boxes 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Many functions will open up a dialogue box. All dialogue boxes may be exited by pressing 15 to accept (mouse click 11[OK]), or 15 to reject (mouse click 11[Cancel]). Icons are selected by keyboard hot-keys, or the 14MLB. When a selector or text icon is active, 15 or 15 will accept or reject any input changes for that icon, and the dialogue box will remain open. Most dialogue boxes have a 11[Help] button. 152.7.0 Warning Dialogue Box 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Many functions will present a warning before executing. Press 15 (mouse click 11[OK]) to continue, or press 15 (mouse click 11[Cancel]) to cancel the function. 152.8.0 Free Memory 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The number of bytes available as free memory is always displayed at the top right of the screen. When this number falls below 1000 (1K), it will be displayed on a red background as a warning. When memory is very low, notes may be lost during some editing operations, and some dialogue boxes may be unable to display selection lists. Next to the free memory display, is the number of bytes in the Measure Buffer. The Measure Buffer is filled during cut and copy operations in the EZPNO Editor. 152.9.0 File Saving 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The song displayed on the screen is a working copy. All editing functions will permanently alter this working copy. Whenever an edit occurs, a music symbol () will appear next to the song title. Be sure to save the song to the hard disk frequently to avoid accidental editing mistakes. 14See Chapter 3: File Management for details about saving and 14loading songs 152.10.0 Clef Deactivation 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The treble or bass clef may be deactivated by entering a 15'0' as the MIDI channel in the Song Settings dialogue box (15). The inactive clef will not play back in the EZPNO Player, be demonstrated or tested in the EZPNO Tutor, or be exported to a MIDI file. 01-------------------- End of Chapter 2 ----------------------------------- 3.0.0 14 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß 14 Chapter 3 14 File Management 14 ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ 15 Sections for Chapter 3: 15 1. File Options 15 2. File Input 15 3. Import a MIDI File 153.1.0 File Options 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Function key 15 will open the File Options dialogue box. 15 Items for this Section: 15 1. Open 15 2. New 15 3. Save 15 4. Import MIDI 15 5. Export MIDI 15 6. Import Buffer 15 7. Export Buffer 15 8. Import Lyrics 15 9. Export Lyrics 153.1.1 Open 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Open an existing EZPNO song file from disk. If changes have been made to the current song, a warning message will ask you if you want to save before proceeding. 153.1.2 New 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Clear the current song. All song settings will be restored to default values. If changes have been made to the current song, a warning message will ask you if you want to save before proceeding. 153.1.3 Save 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Save the current song to disk. Function key 15 is a short-cut for saving files. 153.1.4 Import MIDI 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Import a standard MIDI file. File formats 0 and 1.0 are supported. If changes have been made to the current song, a warning message will ask you if you want to save before proceeding. 153.1.5 Export MIDI 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Export the current song as a standard MIDI file (format 1.0). The first track will contain tempo, time and key signature information. The second and third track will contain the Treble and Bass clefs respectively. If a clef's channel is set to 15'0', its notation will not be exported (see 5.4 MIDI Settings). 153.1.6 Import Buffer 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Import an EZPNO song file to the Measure Buffer. The contents of the Measure Buffer may then be pasted or merged anywhere within the current song. In this way, song parts may be transferred between files. 153.1.7 Export Buffer 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Export the Measure Buffer to an EZPNO song file. The Measure Buffer is created from Cut and Copy operations during Measure editing. Later, exported song parts may be imported to a new song. 153.1.8 Import Lyrics 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Import a standard DOS text file of song lyrics. Each line of the text file will serve as lyrics for successive measures. To see lyrics along the top of the notation window, set the text mode to 15'song lyrics' (see 4.10 Song Settings). 153.1.9 Export Lyrics 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Export song lyrics to a DOS text file. Each measure lyric will serve as a single line in the file. 153.2.0 File Input 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The File dialogue box has three windows: Name, File, and Directory. With the keyboard, press the corresponding hot-key (N,F,D) or press 15 to move to the next window. With the mouse, click in the desired window. 15 Items for this Section: 15 1. Name 15 2. File 15 3. Directory 153.2.1 Name 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ If a file name is entered, EZPNO will search only the current directory. If a file mask (eg. *.*) or directory path is recognized, control is automatically passed to the File window. To change drives, type in the desired drive (eg. A:). ".PNO" is the default file extension for save and open functions. ".MID" is the default for MIDI file functions. ".BUF" is the default for Measure Buffer functions. ".LRC" is the default for Lyric file functions. 153.2.2 File 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ With the keyboard, move the highlighted bar to the desired file using 15<  > <  > , or the first letter of the desired file. Press 15 to make your selection. With the mouse, move the highlighted bar by clicking or dragging the mouse within the window or by moving the slidebar. Make your selection by double clicking the mouse on the highlighted bar. A description of the current highlighted file is displayed under the file window and shows the file name, size, and date and time of last update. 153.2.3 Directory 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Navigation in this window is similar to that described for the File Icon. 153.3.0 Import a MIDI File 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ EZPNO can import two MIDI file tracks to be assigned to the Treble and Bass clefs. Within the selected tracks, a measure range may also be specified so as to isolate a specific song part. You may play the selected tracks or play all available tracks in the MIDI file. You may also return to the File Input dialogue box to import a new file. 15 Items for this Section: 15 1. Track Selection 15 2. Measure Range 15 3. Clef Selector 15 4. Quantize 15 5. Play 15 6. New File 153.3.1 Track Selection 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Select the MIDI track to be imported to the Treble or Bass clef. Enter 15 or click the mouse in the track window to see a list of available tracks. The default tracks are the first two tracks found. 153.3.2 Measure Range 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A measure range may be specified for importing a track part. This may become necessary for large tracks due to memory limitations. The allowable range is 0 to 999. 153.3.3 Clef Selector 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ If only one track is desired for importing, choose the Treble or Bass clef from the Clef selector. 15'Both Clefs' is the default. 153.3.4 Quantize 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The Quantize function allows the timing of raw MIDI data to be structured for notation purposes. This is especially important for imported MIDI files that are created by raw recording only. Because music timing is never perfect from such recording, EZPNO must know how to align note starting times that are not precisely on beat, and the minimum duration of each note. Note-On ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The lowest resolution is 4, so that all notes would be forced to start at the nearest Quarter note boundary. The highest resolution is 32, for which all notes would be aligned along the nearest Thirty-two note boundary. The higher the resolution, the more accurately does the notation reflect the original piece of music. However more memory is required for higher resolutions. Note Duration ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The minimum duration for each note ranges between Quarter note and Thirty-two note. All raw note durations that are found to be less than this minimum, will be lengthened so as to conform to this setting. If the 11[?] setting is selected, EZPNO will quantize each note duration automatically, based on the next note starting time. 153.3.5 Play 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter 15

 or click 11[Play] to play the tracks that have been selected. This way, you may hear your selection before EZPNO converts the track(s) to music notation. Enter 15 or click 11[Play All] to play all available tracks. 153.3.6 New File 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter 15 or click 11[New...] to return to the File Input dialogue box so as to import a new file. 01-------------------- End of Chapter 3 ----------------------------------- 4.0.0 14 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß 14 Chapter 4 14 EZPNO Editor 14 ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ 15 Sections for Chapter 4: 15 1. Music Notation Window 15 2. Key Signature Window 15 3. Note Selector 15 4. Rest Selector 15 5. Edit Window 15 6. Chord Editing 15 7. Chord Selector 15 8. Measure Selector 15 9. Song Statistics 15 10. Song Settings 154.1.0 Music Notation Window 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The music notation window consists of a white music sheet, treble (right hand/upper) staff, and bass (left hand/lower) staff. The current time signature will appear at the beginning of the first measure. The song pointer is a vertical line that marks the current chord position. There will always be one empty chord position in every measure so that the measure may expand. Navigation is always restricted to existing chord positions. If the edit window is opened at this empty chord position, a new chord will be added. Opening the edit window on an existing chord allows editing of that chord. A song's music notation is displayed linearly and may be viewed by panning left or right. 14See 7.7 Slidebar on how to navigate the notation window 154.2.0 Key Signature Window 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 15 Items for this Section: 15 1. Hot-key Icon 15 2. Treble and Bass Clef Icons 15 3. Beat Windows 154.2.1 Hot-key Icon 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Press 15 or click on the 11[(?)Hot-Key] icon for a display of available editing functions with corresponding hot-keys and mouse commands. 154.2.2 Treble and Bass Clef Icons 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The clef icons are toggled by the 15 key, or activated by clicking with the 14MLB on the desired icon. All notation editing will pertain to the currently active clef. 154.2.3 Beat Windows 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The beat windows between the 11[Treble] and 11[Bass] clef icons display the total number of beats in the current measure for each clef. This is used to assist note entry, and should match the number of beats in the time signature (numerator). The current beat within the measure is displayed at the bottom of the key signature window. If the treble and bass clefs are misaligned in timing, then this window will display the treble clef beat. 154.3.0 Note Selector 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The note selector, located on the right of the screen, displays the current default note duration. Selected notes will be of this type. With the keyboard, activate the selector with 15. Then move the highlighted box to the desired note using the arrow keys. Press 15 to make your selection. With the mouse, simply click on the desired note. In the Edit Window, the note duration may by changed by the 15'[' and 15']' keys, or by dragging the 14MLB horizontally (see 4.5 Edit Window). 154.4.0 Rest Selector 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The rest selector is used to enter music rests, and may be activated by pressing 15 with the keyboard, or clicking the 11[Rest] icon with the 14MLB. Rests may only be added when the Edit Window is open. For dotted rests, choose the rest type first and then select the 11[ . ] icon. To delete a rest, choose the 11[DEL] icon. 154.5.0 Edit Window 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 15 Items for this Section: 15 1. Opening and Closing 15 2. Description 15 3. Navigation 15 4. Add or delete a note 15 5. Sharp or flat a note 15 6. Tie a note 15 7. Create a triplet group 15 8. Merge notes 154.5.1 Opening and Closing the Edit Window 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ To open the edit window at the song pointer position, press 15, click the 11[Window] icon, or double-click the 14MLB. Once open, 15 opens a new edit window before the current chord, and 15 opens a new edit window over the current chord to allow merging of entered notes with existing notes (see 4.5.8 Merge notes). To close the edit window, press 15,click the 11[Window] icon, or click the 11[ž] icon at the top right of the edit window. Press 15 to close the edit window and reject any editing changes. 154.5.2 Edit Window Description 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The mode heading is displayed at the top right of the edit window. There are four edit modes available: 1. 15Edit -Edit the current chord 2. 15Add -Add new chord at end of measure 3. 15Insert -Insert a new chord before the current chord 4. 15Merge -Merge a new chord with the current chord The arrow along the left side of the edit window marks the current note position. This is the staff line or space that note editing occurs. A key position pointer along the bottom piano display marks the current piano key. When a note is selected, a small box will mark the corresponding piano key. Notes are displayed as hollow circles. If an accidental (sharp,flat,natural) is present, it will be displayed before the note. The number shown after the note is the note duration (1=Whole, 2=Half, 4=Quarter, 8=Eighth, 16=Sixteenth, 32=Thirty-two). Dotted notes are marked by a small dot next the note. The following icons are available: 04MLB click Keyboard Function 11[ ž ] 15 Close Edit Window 11[Clef] 15 Change clefs 11[  ][  ] 15<-><-> Move to left or right chord 11[  ][  ] 15 Go to first chord or last chord 11[Ins] 15 Insert a new chord 11[Undo] 15 Undo edit changes 11[Sound] 15 Listen to current chord To play the current song, enter 15

 or click the 11[Play] icon. 14See 5.4 MIDI Settings for options relating to MIDI playback. 14See 6.3 Global Settings for options relating to chord sounds. 14See 7.3.2 Edit Window for a summary of all editing commands. 154.5.3 Edit Window Navigation 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Navigate the Edit Window with the 15<  > and 15<  > keys, or by moving the mouse within the window. To change the active clef, press 15 or click the 14MLB on the 11[Clef] icon, or the 11[Treble] or 11[Bass] icons in the Key Signature Window. The active clef will be marked by a highlighted clef symbol. The inactive clef will be shaded. 154.5.4 Add or delete a note 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ To add a new note, press 15, or click the 14MLB at the desired staff position. To mark the note with a finger number, press a number key between 15<1> and 15<5>. Number key 15<0> clears the finger marking. When a new note is added, it will be of the type marked by the highlighted note in the Note Selector at the right of the screen. To quickly change the duration of a new note, press the 15'[' and 15']' keys or drag the 14MLB horizontally. Similarly, 15'[' and 15']', or dragging both the 14MLB and 14MRB buttons horizontally changes the duration of all the notes in the active clef. To delete a note, press 15, or click the 14MRB at the note position. Dragging the 14MRB vertically deletes existing notes much like a pencil eraser. With the keyboard, press 15 to delete all notes in the active clef. Alternatively, you may use a MIDI keyboard to input notes. When a key is played, the note is added to the edit window. If the note already exists, it will be deleted from the window. 14See 4.5.5 Sharp or flat a note for accessing staff positions that are 14out of bounds. 154.5.5 Sharp or flat a note 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A note may be made sharp or flat by pressing 15<+> or 15<-> on a existing note, or by dragging the note vertically with the 14MLB. To enter a note at a staff position that is out of bounds, add a note near the boundary and use the 15<+> or 15<-> keys to move the note past the boundary. Follow the pointer along the bottom piano display. To access an existing note at a staff position that is out of bounds make sure the note position pointer (arrow along left side) is not pointing to a note, and press the 15<+> or 15<-> keys. 154.5.6 Tie a note 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ A note may be tied to another by toggling 15 or double-clicking the 14MLB at an existing note position. This is only necessary for the first note of a tied pair. 15 operates on all notes of the active clef. The symbol for the tied note is an 15'x' in the note circle. 154.5.7 Create a triplet group 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ To mark the current chord as part of a triplet, press 15<3>. A 15'3' symbol will appear at the top right corner for the treble clef, and at the bottom right corner for the bass clef. Three consecutive chord positions must be marked in this way to create a triplet group. 154.5.8 Merge Notes 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ With the Edit Window open enables the Merge Mode. This mode is only necessary when two notes must occupy the same staff position. When positioning the Edit Window over an existing merged chord, only merged notes are available for editing. 154.6.0 Chord Editing 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ There are three chord editing icons available: 11[Cut] (Scissors symbol) 15 11[Copy] 15 11[Paste] (Tape symbol 15 Cut and Copy operations save the chord in a buffer for a future Paste operation. Chord functions operate on the current chord position marked by the song pointer or the Edit Window. 154.7.0 Chord Selector 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The Chord selector may be activated by pressing 15. Its functions may then be accessed with the corresponding hot-key. With the mouse, simply click on the desired icon. 15 Items for this Section: 15 1. Predefined Chords 15 2. Chord Label 154.7.1 Predefined Chords 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The 11[Chord] icon will access the Chord Creation dialogue box. Select the chord and the type of chord from the selectors. A display window shows a description of the selected chord with the chord symbol. If accepted, a chord will be created at the current chord position. 154.7.2 Chord Label 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ EZPNO automatically creates labels that describe a chord. Set the text mode to 15'chord label' in the Song Settings dialogue box (15) to have the chord labels displayed along the top of the notation window. The 11[Label] icon will access the Chord Label dialogue box. The default chord label is displayed, and may be overrided by a user label. To restore the default, select the 11[Default] icon. 154.8.0 Measure Selector 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The Measure selector may be activated by pressing 15. Its functions may then be accessed with the corresponding hot-key. With the mouse, simply click on the desired icon. 15 Items for this Section: 15 1. Key Signature 15 2. Time Signature 15 3. Measure End 15 4. Measure Lyrics 15 5. Measure Editing 154.8.1 Key Signature 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The 11[Key] icon opens the Key Signature dialogue box. Fifteen key signatures are available to choose from. The Mode selector contains three choices: (1)section, (2)song, and (3)current measure. Section mode is the default, and will change the key signature of all measures up to the next key change or end of song. Song mode changes the key signature of every measure. Current measure mode changes the key of the current measure only. The default key signature is C (no sharps or flats). 154.8.2 Time Signature 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The 11[Time] icon opens up the Time Signature dialogue box. You may set the number of beats per measure (numerator), and the note per beat (denominator). The default time signature is 4/4. 14See 4.8.1 Key Signature for a description of the mode selector. 154.8.3 Measure End 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The 11[End] icon will end the current measure with the conventional measure end symbol. If a measure end already exists, the Measure End dialogue box will open up. You may choose from a variety of measure end symbols. 154.8.4 Measure Lyrics 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The 11[Lyric] icon will open the Measure Lyrics dialogue box. 55 characters of text are allowed per measure. Lyrics entered here are displayed during playback in the EZPNO Player. Set text mode to 15'song lyrics' in the Song Settings dialogue box (15) to have the lyrics displayed along the top of the notation window. 14See 7.6 Text Editing for available text editing commands. 154.8.5 Measure Editing 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The 11[Edit] icon opens the Measure Editing dialogue box. The Measure Editing functions are divided into two groups. The first group (Cut,Copy,Shift,Quantize) may operate on a range of measures, and may be selected by clef. The second group (Paste,Merge,Insert) may be repeated. Measure Buffer ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Cut and Copy functions save notation in the Measure Buffer. The size of the Measure Buffer is always displayed at the top right of the screen. The contents of the measure buffer may be pasted or merged at any point in the song. The Measure Buffer may also be exported to or imported from a file, so that song parts may be transferred between song files. The Measure Buffer is automatically cleared when a new song is loaded, or when memory has been exhausted. Clef Selector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Select the clef for which editing operations are active. 15'Both Clefs' is the default. Measure Range ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Select the measure range for which editing operations are active. The allowable range is 0 to 999. Press 15 or click 11[All] to select all measures for the edit operation. The From-Measure and To-Measure may be marked with 15 and 15 respectively. Press 15 or click 11[Range] to input this preset range. Cut ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter 15 or click 11[Cut] to delete or clear the selected range of measures. If Clef is set to 15'Both', the measure range is deleted. Otherwise, the selected clef is cleared within the measure range. Deleted or cleared measures are saved in the Measure Buffer for future pasting, merging, or exporting. Copy ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter 15 or click 11[Copy] to copy the selected range of measures to be saved in the Measure Buffer for future pasting, merging, or exporting. Shift ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter 15 or click 11[Shift] to shift notation from one clef to the other for the selected measure range. You must choose the clef (Treble or Bass) that you want to transfer from. This feature is especially useful for imported MIDI files to separate one track onto both Treble and Bass clefs. This function causes EZPNO to recreate music notation and to force all measures to conform to the time signature. All manual changes to the notation will be lost. Once selected, a highlighted horizontal line will appear in the notation window along with the Clef Boundary dialogue box. This horizontal line represents the clef boundary of the selected clef. If the Treble clef has been selected, all notes on and above the line will remain on the clef, and all others will be transferred to the Bass clef. If the Bass clef has been selected, all notes on and below the line will remain on the clef, and all others will be transferred to the Treble clef. Move the clef boundary line using the 15<  > and 15<  > keys or dragging or clicking the mouse. The boundary may be fine tuned by pressing the 15<+> or 15<-> keys, or by manually entering the MIDI note value. Quantize ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter 15 or click 11[Quantize] to quantize the selected range of measures. This feature is especially useful for imported MIDI files so as to align note starting times and standardize note durations. This function causes EZPNO to recreate music notation and to force all measures to conform to the time signature. All manual changes to the notation will be lost. Once selected, the Quantize dialogue box will appear (see 3.3.4 Quantize). Paste ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter 15

 or click 11[Paste] to paste the contents of the Measure Buffer at the current song position. Pasted measures will be inserted before the current measure. The Measure Buffer is cleared following a Paste operation. Merge ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter 15 or click 11[Merge] to merge the contents of the Measure Buffer starting at the current measure. The notation of each measure in the Measure Buffer will be combined with that of the current and subsequent measures of the song. If the end of the song has been reached, any remaining measures in the Measure Buffer will be appended to the song. The Measure Buffer is cleared following a Merge operation. 14Tip: 14The easiest way to enter sheet music is to enter the Treble clef 14and Bass clef notation in different measures. Afterwards, you may 14merge the Bass clef measures into the Treble clef measures 14(or vice-versa). Insert ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Enter 15 or click 11[Insert] to insert a new empty measure before the current measure. Repeat ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ This parameter instructs EZPNO as to how many times a given paste, merge, or insert operation is to be performed. The default is one time (1). 154.9.0 Song Statistics 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 15 opens the Song Statistics dialogue box. This box displays the key signature, time signature, treble clef beats, bass clef beats, and the sight-reading score for each measure. If the number of beats found in a clef does not match the time signature, an asterisk (*) will be displayed next to the beat number. The song performance score displayed at the bottom is the average of all measure sight-reading scores. You may select a measure to view by moving the highlighted bar to the desired measure and pressing 15 or double-clicking the 14MLB. 154.10.0 Song Settings 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 15 opens the Song Settings dialogue box. The text mode icon selects the type of text that will be displayed at the top of the notation window. The default is 15'chord label'. 'Song lyrics' or 'no text' are the other options. 14See 5.4 MIDI Settings for a description of other song settings 14(tempo,channel,volume,patch) 01-------------------- End of Chapter 4 ----------------------------------- 5.0.0 14 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß 14 Chapter 5 14 EZPNO Player 14 ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ 15 Sections in Chapter 5: 15 1. Play 15 2. Rewind 15 3. Stop 15 4. MIDI Settings 15 5. Song Lyrics 15 6. Animation 155.1.0 Play 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ To play the current song, and press 15

 or 15, or click the 11[PLAY] icon with the 14MLB. Playback will begin from the current measure and continue to the end of the song. Any key or mouse press will stop the playback. 155.2.0 Rewind 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Press 15, or click the 11[REW] icon to rewind to the beginning of the song. The first measure will be displayed. 155.3.0 Stop 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Any key or mouse press stops playback. The 11[STOP] icon is activated automatically after playback. 155.4.0 MIDI Settings 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ To change various MIDI settings, open the Song Settings dialogue box (15). In this box, you may change the MIDI channel, volume, and patch (instrument) for both treble and bass clefs. In the patch window, enter 15 or click the 14MLB to access a list of available general MIDI instruments. The tempo, or song speed, may also be set in this dialogue box. If a clef MIDI channel is set to 15'0', the clef becomes inactive (see 2.10 Clef Deactivation). 155.5.0 Song Lyrics 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Make sure the text mode is set to 15'song lyrics' in the Song Settings dialogue box (15). If song lyrics have been entered, they will be displayed at the top of the notation window during playback. The current measure lyrics are always highlighted. "< Pause... >" will be displayed if no lyrics exist for a given measure. 155.6.0 Animation 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ During playback, graphical animation will simulate fingers playing the keys on the piano along the bottom of the screen. Activate function key 15 to see animation on the zoom piano (see 6.2 Zoom Piano). 01-------------------- End of Chapter 5 ----------------------------------- 6.0.0 14 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß 14 Chapter 6 14 EZPNO Tutor 14 ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ 15 Sections in Chapter 6: 15 1. Overview 15 2. Zoom Piano 15 3. Global Settings 15 4. Sight-Reading 15 5. Color / Finger Position Conventions 156.1.0 Overview 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The EZPNO Tutor is designed so that a song may be learned measure by measure, step by step. In this mode, every chord position is sounded and drawn on the piano along the bottom of the screen. The following is a list of available functions: 04 Icon Hot-Key Function 11[((*))] 15 Sound current chord 11[ - ] 15< - > Next chord position 11[Home ] 15 First chord position 11[Auto ] 15 Automate stepping. 11[Play] 15

,  Play measure(s) 11[Sight-Read] 15 Test sight-reading 11[Mes] 15 Set no. of measures for play,auto,sight-reading. 156.2.0 Zoom Piano 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Function key 15 loads the zoom piano to display a closer view of the 88-key piano. Only 48 keys are shown at a time. Above the treble clef will appear two icons which allow you to move horizontally along the zoom piano: 04 Icon Hot-Key Function 11[L - ] 15 Move left 11[R - ] 15 Move right 156.3.0 Global Settings 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Function key 15 opens the Global Settings dialogue box. All settings are saved to a configuration file when the program ends. Chord Note Length ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ This parameter specifies the duration of individual notes of a chord, when sounded in the EZPNO Editor or Tutor. The allowable range is 0 to 480 ticks. (120 ticks = 1 Quarter note) Chord Arpeggio ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Arpeggio specifies the delay in ticks between individual notes of a chord, when sounded in the EZPNO Editor or Tutor. (120 ticks = 1 Quarter note) Tutor Auto Delay ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ This parameter is used for timing purposes in the Auto function of the EZPNO Tutor. Increasing this value improves the musical timing but slows the automatic stepping. If timing is less important, decrease this value to improve the speed of the automatic stepping. 3D drawing ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Setting 3D draw will enhance the three-dimensional quality of the piano images in the EZPNO Tutor. However a math coprocessor (DX chip) is recommended for acceptable speed. 156.4.0 Sight-Reading 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Press 15 or click the 11[Sight-Read] icon to activate this function. Hit any key on the computer keyboard to stop. A MIDI keyboard must be connected to the MIDI-In port of your MIDI interface. In this mode, the EZPNO Tutor tracks your progress while you sight-read the sheet music appearing on the screen using your MIDI keyboard. Specify the number of measures to sight-read by pressing 15, or clicking the 11[Mes] icon. Sight-reading will begin from the current measure and will repeat after the specified number of measures have been read, or the end of the song has been reached. When the correct note is played, a check mark (ū) will appear besides the note. When all notes of the current chord position have been played, you will automatically advance to the next position. The chord will be highlighted, and the number of incorrect notes played will be displayed at the top. After each measure, a score for the measure will be displayed at left of the notation window. This score is derived from the number of notes in the measure divided by the number of notes played. A total score for all the measures of the practice session will be displayed below the measure score. Hit any key on the computer keyboard to end this mode. You may open the the Song Statistics dialogue box 15 to review all measure scores and the total song performance score. These scores are saved with the song, and are replaced at the next sight-reading session. To select only one clef for sight-reading, deactivate the other clef by setting its MIDI channel to 15'0' (see 2.10 Clef Deactivation). 156.5.0 Color / Finger Position Conventions 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The right and left hand keys are colored green and light blue respectively. When the a key is to be held down, the color will be grey and no sound is emitted. Finger numbers may appear on the note to indicate finger position: 1 - Thumb 2 - Index finger 3 - Middle finger 4 - Fourth finger 5 - Pinky 01-------------------- End of Chapter 6 ----------------------------------- 7.0.0 14 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß 14 Chapter 7 14 Key/Mouse Command Summary 14 ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ 15 Sections in Chapter 7: 15 1. Main Menu 15 2. Function Keys 15 3. EZPNO Editor 15 4. EZPNO Player 15 5. EZPNO Tutor 15 6. Text Editing 15 7. Slidebar 157.1.0 Main Menu 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ EZPNO Editor 15 EZPNO Player 15

 EZPNO Tutor 15 Quit 15 Main Menu 15 157.2.0 Function Keys 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Help 15 File Save 15 File Options 15 Song Statistics 15 Song Settings 15 Global Settings 15 Zoom Piano 15 Main Menu 15 Mark From-Measure 15 Mark To-Measure 15 Available RAM 15 157.3.0 EZPNO Editor 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 15 Items for this Section: 15 1. General 15 2. Edit Window 157.3.1 General 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Hot-Key help window 15 Treble/Bass clef 15 Chord selector 15 Measure selector 15 Note selector 15 Rest selector 15 Open Edit Window 15 Play song 15

 Cut chord 15 Copy chord 15 Paste chord 15 Move/scroll left 15< - > Move/scroll right 15< - > Measure first chord 15 Measure last chord 15 157.3.2 Edit Window 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Mouse Commands: ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 14MLB Mouse Left Button 14MRB Mouse Right Button 14MBB Mouse Both Buttons 14drag Hold button down and move mouse 14dclk Double-click mouse button Open/Close edit 15 14MLB dclk Insert edit window 15 14MRB dclk Merge edit window 15 Abort edit window 15 Select/Clear note 15 14MLB/MRB Clear all notes 15 14MRB drag Sharp current note 15<+> 14MLB drag up Flat current note 15<-> 14MLB drag down Toggle triplet 15<3> Toggle note tie 15 14MLB dclk Toggle all note ties 15 Inc note length 15< ] > 14MLB drag right Dec note length 15< [ > 14MLB drag left Inc all note lengths 15< ] > 14MBB drag right Dec all note lengths 15< [ > 14MBB drag left Note position up 15<  > Note position down 15<  > Next higher note 15<  > Next lower note 15<  > Next note letter 15 Add note, finger 1 15<1> Add note, finger 2 15<2> Add note, finger 3 15<3> Add note, finger 4 15<4> Add note, finger 5 15<5> Clear finger number 15<0> Undo 15 Sound chord 15 157.4.0 EZPNO Player 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Play 15

,  Rewind 15 Stop 15 Zoom Mode ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Zoom Piano pan left 15 Zoom Piano pan right 15 157.5.0 EZPNO Tutor 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Sound current chord 15 Next chord position 15< - > First chord position 15 Automate stepping 15 Play measure(s) 15

,  Sight-read 15 Set number of measures for play, auto: 15 Zoom Mode ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Zoom Piano pan left 15 Zoom Piano pan right 15 157.6.0 Text Editing 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Left 1 character 15< - > Right 1 character 15< - > Left 1 word 15< - > Right 1 word 15< - > First character 15 Last character 15 Delete character 15 Delete previous char 15 Delete to end of line 15 157.7.0 Slidebar 15ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Back one measure 15 Forward one measure 15 Back ten measures 15 Forward ten measures 15 First measure 15 Last measure 15 01-------------------- End of Chapter 7 ----------------------------------- 8.0.0 14 ßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßß 14 Chapter 8 14 I N D E X 14 ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ 15 ßßßßßßßßßß 15 A 15 ÜÜÜÜÜÜÜÜÜÜ Add note 4.5.4 Advanced Gravis UltraSound 1.4.3 Animation 5.6 Arpeggio 6.3 15 ßßßßßßßßßß 15 B 15 ÜÜÜÜÜÜÜÜÜÜ Bass clef icon 4.2.2 Beat windows 4.2.3 15 ßßßßßßßßßß 15 C 15 ÜÜÜÜÜÜÜÜÜÜ Chord arpeggio 6.3.0 conventions 6.5 copy 4.6 create 4.7.1 cut 4.6 editing 4.6 label 4.7.2 note length 6.3 predefined 4.7 selector 4.7 Clef deactivation 2.10 Closing the edit window 4.5.1 Command line switches 1.3.2 Conventions used in guide 1.5 Copy chord 4.6 measure 4.8.5 Cut chord 4.6 measure 4.8 15 ßßßßßßßßßß 15 D 15 ÜÜÜÜÜÜÜÜÜÜ Deactivation of clef 2.10 Dialogue boxes 2.6 Directory list 3.2.3 Delete a note 4.5.4 Drivers for sound cards/MIDI interfaces 1.4.0 15 ßßßßßßßßßß 15 E 15 ÜÜÜÜÜÜÜÜÜÜ Edit measure 4.8.5 Edit window 4.5 End measure 4.8.3 Export buffer 3.1.7 lyrics 3.1.9 MIDI 3.1.5 15 ßßßßßßßßßß 15 F 15 ÜÜÜÜÜÜÜÜÜÜ File list 3.2 name 3.2.1 options 3.1 saving 2.9 Finger marking 4.5.4 Finger position conventions 6.5 Flat a note 4.5.5 Free memory 2.8 Function keys 7.2 15 ßßßßßßßßßß 15 G 15 ÜÜÜÜÜÜÜÜÜÜ Global Settings 6.3 15 ßßßßßßßßßß 15 H 15 ÜÜÜÜÜÜÜÜÜÜ Hot-key Icon 4.2.1 15 ßßßßßßßßßß 15 I 15 ÜÜÜÜÜÜÜÜÜÜ Import buffer 3.1.6 lyrics 3.1.8 MIDI 3.1.4 Import MIDI file 3.3 Input filename 3.2 Insert measure 4.8.5 Installation 1.3.0 15 ßßßßßßßßßß 15 K 15 ÜÜÜÜÜÜÜÜÜÜ Key signature dialogue box 4.8.1 window 4.2 15 ßßßßßßßßßß 15 L 15 ÜÜÜÜÜÜÜÜÜÜ Label chord 4.7.2 Lyrics 5.5 15 ßßßßßßßßßß 15 M 15 ÜÜÜÜÜÜÜÜÜÜ Main menu 7.1 Math coprocessor 1.2 Memory 2.8 Measure buffer 4.8.5 editing 4.8.5 end 4.8.3 lyrics 4.8.4 merge 4.8.5 range 4.8.5 selector 4.8 Merge measure 4.8.5 notes 4.5.8 MIDI import file 3.3 interface drivers 1.4.0 settings 5.4 MPU401 1.4.1 Music terms used in guide 1.6 15 ßßßßßßßßßß 15 N 15 ÜÜÜÜÜÜÜÜÜÜ Navigation of edit window 4.5.3 New file 3.1.2 Notation window 4.1 Note add 4.5.4 length 6.3 selector 4.3 15 ßßßßßßßßßß 15 O 15 ÜÜÜÜÜÜÜÜÜÜ Overview of program 1.1 Open file 3.1.1 edit window 4.5.1 15 ßßßßßßßßßß 15 P 15 ÜÜÜÜÜÜÜÜÜÜ Paste chord 4.6 measure 4.8.5 Piano zoom 6.2 Play 5.1 15 ßßßßßßßßßß 15 Q 15 ÜÜÜÜÜÜÜÜÜÜ Quantize 3.3.4, 4.8.5 15 ßßßßßßßßßß 15 R 15 ÜÜÜÜÜÜÜÜÜÜ Repeat edit 4.8.5 Rest Selector 4.4 Rewind 5.2 Roland MPU401 1.4.1 15 ßßßßßßßßßß 15 S 15 ÜÜÜÜÜÜÜÜÜÜ Save file 2.9, 3.1.3 Selectors 2.3 Settings global 6.3 MIDI 5.4 song 4.10 Sharp a note 4.5.5 Shift measure 4.8.5 Sight-reading 6.4 Slidebar 2.2, 7.7 Sound Blaster 1.4.2 Sound card drivers 1.4.0 Starting the program 1.3.1 Statistics 4.9 Stop 5.3 System Requirements 1.2 15 ßßßßßßßßßß 15 T 15 ÜÜÜÜÜÜÜÜÜÜ Text editing 7.6 icons 2.4 selector icons 2.5 Three-dimensional (3D) drawing 6.3 Tie a note 4.5.6 Time signature 4.8.2 Track selection for MIDI files 3.3.1 Treble clef icons 4.2.2 Triplet 4.5.7 Tutor auto delay 6.3 15 ßßßßßßßßßß 15 U 15 ÜÜÜÜÜÜÜÜÜÜ UltraSound 1.4.3 15 ßßßßßßßßßß 15 V 15 ÜÜÜÜÜÜÜÜÜÜ Voyetra VMP sound card drivers 1.4.4 15 ßßßßßßßßßß 15 W 15 ÜÜÜÜÜÜÜÜÜÜ Warning Dialogue Box 2.7 15 ßßßßßßßßßß 15 Z 15 ÜÜÜÜÜÜÜÜÜÜ Zoom piano 6.2 01-------------------- End of Chapter 8 -----------------------------------