---------------------------------
			  Installation Instructions for 
			FlashPoint Windows ZIP Navigator,
			       Release 2.01.00.00
			---------------------------------


This is the latest version of FlashPoint Windows ZIP Navigator.

	============================================================
	The file ZIPNAV.EXE is a self extracting DOS archive file
	which must be expanded to a temporary directory on your hard
	drive before you can run FPSETUP.EXE.
	============================================================

To install this product on your system, do the following:

  1.  Make a backup copy of your WINFILE.INI, REG.DAT and any
      existing FPZIP.INI files -- BEFORE RUNNING FPSETUP.EXE.  If
      you have customized your ZipNAV File Manager pull-down menu
      settings, you will need to edit the new WINFILE.INI by
      transfering your menu commands from your old copy of WINFILE.INI.
      The editing can be performed using Windows Notepad.

  2.  Copy ZIPNAV.EXE to a temporary directory on your hard drive.

  3.  Run ZIPNAV.EXE (e.g., by double-clicking on the file's name
      in File Manager, or using the "Run" command available on the
      FIle Menu of Windows' Program or File Manager).  This will expand
      all installation files to the temporary directory.

  4.  Run FPSETUP.EXE (e.g., by double-clicking on the file's name
      in File Manager, or using the "Run" command available on the
      File Menu of Windows' Program or File Manager).  This will start
      the FlashPoint Windows ZIP Setup program.

  5.  Answer the prompts that display on your screen as FPSETUP runs.

      ------------------------------------------------------------
      Note:  If you have an earlier version of any of the FPZIP or
      ZIP Tools applications installed on your system, you will be
      propmpted as to whether the existing files should be over-
      written.  You should allow the installation program to over-
      write all files, except an existing FPZIP.INI file.
      ------------------------------------------------------------

   6.  Edit your new WINFILE.INI file, as indicated in item 1, above.

   7.  Exit to DOS and then reload Windows, so that the new settings will
       take effect.

   8.  Delete all files in the temporary directory from which you installed
       this product.



      Additional Installation Instructions for Windows 3.0 Users
      ----------------------------------------------------------

Windows 3.0 users must also have the following files installed on their
system:

	COMMDLG  DLL     97936 10-21-93   3:11a  <-- Windows System Dir
	SHELL    DLL     40944 10-21-93   3:11a  <-- Windows System Dir
	TOOLHELP DLL     14128 02-08-93   1:01a  <-- Windows System Dir
	WINHELP  EXE    256192 02-08-93   1:01a  <-- Windows Dir

These files are available for download from many online services, including
the Microsoft Software Library on CompuServe, GEnie and America Online, and
may be obtained directly from Microsoft.  

Registered users, who cannot obtain same from the above sources, may obtain
copies from FlashPoint Development.  Send $10.00, to cover the costs of 
media, shipping and handling, to:

                        FlashPoint Development
                        Attn: Richard S. Patterson
                        P. O. Box 270492
                        Houston, TX  77277

Please include a note indicating that you are ordering the 

                 "ZipNAV Windows 3.0 Supplement Disk" 

All checks and money orders must be made payable to:

                         Richard S. Patterson